Single Edgebanders

BIESSE AKRON 1440 AIRTEC

Condition: used, machine/vehicle number: 007687, Type of edging: Thin edge, Thick edge, Solid wood Lhjdpfx Ahjwuz Nps Ssn Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: excellent (used), Year of construction: 2008, Machining center Manufacturer: Weeke Type: BHX 500 Year of manufacture: 2008 Machining dimension X: 2,500 mm Machining dimension Y: 1,300 mm Machining dimension Z: 4 - 80 mm Lhodpfxjh E Sghj Ah Sjn Number of routing heads: 2 Number of drilling heads: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Notch saw: can be swiveled 90° Speed, X-axis: 130 m/min Speed, Y-axis: 80 m/min Speed, Z1-axis: 50 m/min Speed, Z2-axis: 27 m/min Rotational speed: 18,000 rpm Dismantled – available immediately

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Lhsdpfxot Hal Ds Ah Son Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: reconditioned (used), Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - machine has been completely overhauled: - new Glue Jet 301 glue system (top part 1 mm) - all units inspected - all cutters sharpened - all knives replaced - feed speed: 10 - 18 m/min - workpiece length: min. 160 mm - workpiece width: min. 60 mm - workpiece thickness: 8 - 60 mm - edge thickness: 0.4 - 8 mm - electrics for infinitely variable feed: 400 V / 50 Hz, 2.2 kW - motorised pressure beam adjustment - automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy-saving mode - infeed fence 1350 mm, motor-adjustable - jointing/trimming unit 1802: - 2 x 2.0 kW, 200 Hz, 12000 rpm with 2 milling units for jointing the panel edge - cutter, diamond Ø 70 x 64 x 30 mm, Z2, counter-clockwise for jointing unit - cutter, diamond Ø 70 x 64 x 30 mm, Z2, clockwise for jointing unit - edge feed 1901 fully automatic - adhesive application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - storage hopper for granulate - pressure unit 1913 MOT - end-trimming unit 1918 (60 mm) pneumatic - multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm counter-clockwise - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm clockwise Lhsdpfezlbpzjx Ah Sen - profile milling unit 1833 MOT4: - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, counter-clockwise with CM technology - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, clockwise with CM technology - scraper unit 1929 MOT2: - carbide indexable inserts for scraper holder R = 2.5 mm (2 pcs. required) - flat scraper 1964 - buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: at short notice Location: 63934 Röllbach

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Lhsdpfow Naansx Ah Sen Equipment and technical specifications: The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. The features - In a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Edgebander BIESSE Akron 1440A Availability: April/May 2026 CE certificate Lhjdpfx Aeyh A I Ajh Ssn Year of manufacture: 2017 Possibility to inspect the machine before purchase

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: A3347169, functionality: fully functional, number of axes: 3, CNC machine SCM, Record 100 AL action line, 3-axis woodworking line, 400V, year of manufacture 16/07/2008, electrical cabinet, control with safety mat, partition wall, working area 305 x 122 cm, total machine dimensions: approx. 565 x 250 x 260 cm, self-dismantling required 3 axes In perfect working condition Ledpjxg El Ajfx Ah Sohn 1 large vacuum with details of white panel and 1 small vacuum: Year 2019 / N°A3347169 Type VTLF2.250/0-79 Frequency 50/50Hz Speed 950/1150min-1 Power required 5.5/6.4kW Inlet capacity 244/286m³/h Max vacuum 200/200mbar Video available.

Year of construction: 2018, condition: new, Demonstration machine Year of manufacture: 2018 With full warranty Features and technical data: Functionality · Room geometry capture via laser measurements · Total station function: standard measurement points can be augmented by custom measurement points · Complex 360° panoramic capture from each room scan · Image and measurement functions for every detail · Complete photographic documentation · Preview panorama display via HottScan app · Data transfer via USB stick or WiFi with app Technical Data Overview Angle meter features Measurement range: Horizontal 347°, Vertical 180° Accuracy: 0.01°, relative Laser distance meter features Type: Coaxial, visible red laser Measuring range: 0.05–80 m Laser class: 2 Laser type: 650 nm; < 1 mW Laser spot diameter (at distance): 5 m: 4 mm; 10 m: 8 mm; 50 m: 28 mm x 14 mm Accuracy: +/- 1 mm, depending on distance, surface & light conditions Operation User interface: Control panel with soft-touch keys and LED lighting/Display of battery capacity/status and error indicators Data exchange Flash memory: 32 GB, USB and WiFi Range: 50 m (depending on environment) Power supply Power adapter: 14.8 V, 1.2 A, with a cut-off voltage of 16.8 V, primary voltage 100 V – 240 V, 19.5 VA, 50/60 Hz Battery: operating range between 11.2 V and 16.8 V Runtime: Up to 11.5 hours, depending on use of LED lighting; approx. 8 hours under typical use Environmental Conditions Operating temperature: operation and battery charging: +0° to +40° C Storage temperature: -20° to +50° C Dust and moisture: IP 40 Special Features · Hot Swap: the replaceable battery can be exchanged during operation in just seconds · Integrated lighting assists in poor lighting conditions · Mobility: Lightweight (approx. 4.7 kg) combined with a foldable tripod makes the HottScan HS-1 a compact tool for on-site inspection and maintenance jobs Lsdpfx Asw I Uizsh Sohn Your Advantages · Mobility (light weight) and long battery life · Avoidance of multiple on-site visits · Battery change within seconds · Free loan device in case of servicing from the 3rd business day Includes HottScan Room Modeler full version Software for generating a 3D room model from scanner data, export of quantity data in CSV format, geometry export in DWG/DXF format with layer structure, and Collada format Performance scope · Simple room modeling from first-person perspective · Export of quantity data in CSV format · Geometry export: DWG/DXF format with layer structure and Collada format with textures; continual post-processing possible in all 3D CAD programs Includes transport case for HottScan 3D room scanner · Weather-, corrosion- and temperature-resistant aluminum sheet · Lid and bottom profiles welded at the seam · 2 stainless steel hinges · 2 lever-lock clasps · Continuous rubber seal providing dust and splash water protection · Temperature resistance from -40°C to +80°C Interior · Egg-crate foam in the lid · Foam insert in the base with product-shaped cut-outs Availability: Short notice Location: Flörsheim

Condition: new, Year of construction: 2023, Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This allows us to directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! Always in stock, available as left-hand and right-hand models with motorized cleaning. Ljdpfx Asku Aibsh Sohn Riedex DM-200 Motor power 4.0 kW Ready for connection. Packaged on a pallet! Ready for shipment. Alternatively, also available with JET cleaning. Many different versions are possible ... - with cell wheel lock (if desired, with a subframe) - with briquetting press etc.

Condition: good (used), Code: 0348 Brand: VITAP - ITALY Model: POINT K2 TOP - CE Standard CNC working centre for the precise and flexible drilling and milling of panels, furniture, custom-made furniture, kitchens, bathroom furniture and various – CE Standard – Year 2017 Technical specifications: Compact machine Patented D.D.T. (double dynamic transport) system with continuous panel movement without any repositioning of the workpiece, using two clamps. Technical data: Panel dimensions: Min/max length 270/3000 mm Min/max width 180/1100 mm Max height 50 mm Horizontal panel feed on X-axis 25 mt/min Vertical feed on Z-axis 15 mt/min Horizontal feed on Y-axis 30 mt/min Drilling head: Motor 2 Hp 12 vertical spindles side 1 Z-axis 2 horizontal spindles side 4 Y-axis 2 horizontal spindles side 6 of the Y-axis 2 horizontal spindles side 3 X-axis 2 horizontal spindles side 5 X-axis Centre-to-centre distance between spindles 32 mm Max horizontal bit diameter 15 mm Max horizontal drilling depth 30 mm Max vertical drilling depth 55 mm Router unit: Motor power 5 Hp - 24.000 rpm Blade unit: Diameter mm 100 x 4 - 7.000 rpm TPA software Horizontal milling unit Infeed roller conveyor 800 x 600 mm Outfeed roller conveyor 800 x 600 mm Suction port diameter : 1 mm 50 - 2 mm 100 Compressed air 7 bar Overall dimensions mm 2530 x 1700 x 1900 h Ledpfx Ahjyzrxzj Sehn Weight kg 833