Gang drilling machine

Fritz Heckert FZ 1600x1600x4000/4

Condition: good (used), Year of construction: 2002, travel distance X-axis: 1,050 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, 3-Axis Machining Center Manufacturer: Bridgeport Model: VMC-1000 XP Year of manufacture: 10-2002 Control type: Heidenhain iTNC-530 Psdpfew Nyfdox Ah Uerf Operating hours: n/a S/N: 82XXXX Technical Data: ----- - Travel X-Y-Z: 1,050 x 610 x 600 mm - Spindle: max. 8,000 rpm - Tool holder: SK40 - Tool magazine: 22 positions - Coolant system - Through-spindle coolant (IKZ) - Glass scales on all axes X-Y-Z - Central lubrication - Weight: approx. 4.2 t - Dimensions LxWxH: 3,000 x 2,350 x 2,400 mm Accessories: ----- - Manuals - Tool holder package Special features: ----- - Through-spindle coolant (IKZ) deactivated due to defective flow tube in spindle - Spindle replaced in 2023, few hours of operation, precise concentricity

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 36,000 m/min, table width: 760 mm, table length: 2,000 mm, table load: 1,400 kg, IKZ 15 BAar Measuring probe MP12 Bohrzyklus with torq depending Performance package Pendel screen Interface set X - Travel: 1740mm Y - Travel: 760mm Z - Travel: 660mm Table Length: 2000mm Table Width: 760mm Table load: 1400 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:Yes Prjdpjw Rntrofx Ah Ujf Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 4450mm Width: 3460mm Height: 2900mm Weight: 10500kg

Condition: good (used), Spectro CIROS CCD Water Analyser Psdpfjfiqn Usx Ah Uerf - height: 105cm - width: 150cm - depth: 75cm Good condition fully functional can be inspected and tested on site. Shipping also abroad. Inspection : Basically I would like to point out that in order to avoid misunderstandings, the article can be inspected and tested under power before purchase. Please ask questions before purchase to avoid any ambiguity. If you have general questions or would like to make an appointment for a viewing, I can be reached at any time at the telephone number below. Errors in the description and prior sale reserved. The value added tax is shown separately on my invoices. Dispatch with forwarding agent.

Condition: used, total height: 1,700 mm, total length: 6,000 mm, total width: 1,700 mm, Empty weight: 6.500 kg Price: On request Lathe metal lathe Model: Conventional Manufacturer: TOS Type: SUI 63 Serial number: 407620860 Center distance: 4000mm Center height: 325mm Turning diameter: 630mm Spindle passage: 80mm Spindle speed: 11,2-1800 rpm Pjdpfxownhy Ie Ah Ujrf Machine-afmeting: 6000x1700x1700mm Machine weight: 6500kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 325 - Swing over bed [mm]: 630 - Distance between centres [mm]: 4000 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 11.2 - Max. spindle speed [rpm]: 1800 - Transport dimensions: 6000mm x 1700mm x 1700mm (l x w x h) - Transport weight [kg]: 6500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Model: FMV-1700 Year of Manufacture: 1999 Control System: FANUC Number of Tools: 24 Maximum Spindle Speed: 12000 RPM X-Axis Travel: 1700 mm Y-Axis Travel: 750 mm Z-Axis Travel: 700 mm Other Specifications: BT50 Movement System for Each Axis: Box Predpsn D Ifiofx Ah Usf Machine Weight: 9000 kg With fourth axis

Condition: good (used), Year of construction: 2002, Machine is in good working condition. Predpfx Ahjxbqnxo Ujf Parts shown by hand not come.

Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. turning diameter max : 1400 mm Prodpfxjvi Hrye Ah Uef face plate : 1250 mm Automatic turret head spindle speed : 3,5-180 rpm feeds : 0,063 - 3,15 mm/rev rapid traverse : 1800 mm/min Further data see data sheet Machine documentation available . Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition .

Condition: like new (used), Year of construction: 2001, Retrofitted: 2024 Psdpfx Ahsugbq To Ujrf Numerical control: HEIDENHAIN TNC426 Technical features Dimensions Table dimensions: 3500 x 1100 mmNumber of T slots: 8T slots dimensions: 22 mm Traverses of axis X axis traverse: 3000 mmY axis traverse: 1200 mmZ axis traverse: 1000 mm Milling head Head type: Universal manual long face (UL40)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872Speed range: 20 - 3000 rpmSpindle power: 29,6 kW Feedrates Feedrate: 2 - 5000 mm/minRapid feedrate (X / Y,Z): 15000   /   10000 mm/min Weight and dimensions Maximum weight on table: 8000 kgMachine weight approx.: 20000 kgMachine dimensions approx.: 7900 x 4670 x 2900 mm Accesories External high pressure through spindle coolantElectronic handwheel: HR-130Guarding Sales conditions Warranty: 6 months mechanical partsSale price (Ex Work): On request View all technical features

Condition: used, Year of construction: 1969, max. wheel diameter 160,175 mm gear width 355 mm max. module 4,5 spindle bore 75 mm centre distance 410 mm min. number of teeth 2, 3 cutter diameter max. 115 mm cutter length max. 105 mm axis distance between cutter and workpiece - max. 138 mm axis distance between cutter and workpiece - min. 30 mm milling head -swivable 120 ° milling spindle speeds 70 - 400 U/min axial-feeds 0,25 - 4,0 mm/U radial feeds 0,09 - 1,5 mm/U total power requirement ca. 9,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1730x1400x1440 mm Equipment/accessories: - Interchangeable wheels - Milling arbors - Clamping devices Podjvzhf Sspfx Ah Ujrf - Documentation

Condition: used, Year of construction: 2007, A 2007 Built Hardinge Bridgeport XR760 with Fanuc 18iM control, 12,000 RPM RPM spindle with through coolant, 30 tool rapid ATC & swarf conveyor X Axis 760mm, Y Axis 610 mm, Z Axis 610 mm Working Surface 1000 x 600mm, Table Load 900 kg, Number of T-Slots 5, T-Slot Size 18 mm, T-Slot Center Dimension 100 mm Table Surface to Spindle Gauge Plane Distance 100 to 710 mm Feedrate Range (X and Y Axis) .0025 - 20 m/mm Feedrate Range (Z Axis) .0025 - 20 m/mm Ball Screw Dia. and Pitch (X and Y Axis) 45 x 16 mm, Z Axis 45 x 12 mm, Spindle 12,000 RPM Fanuc Motor HP Rating (S6 40%) 25Kw, Torque (S6 40%) 159.2Nm, Spindle Taper BT 40 Magazine Capacity 30 Tools Max. Tool Diameter 125 mm (adjecent pocket) 80 mm Max. Tool Length 300mm, Max. Tool Weight 7 kg, Coolant and Chip Management Swarf Removal Chip Conveyor, Coolant Tank Capacity 355L, Wash Down Standard, Wash Gun Standard, Cutter Air Blaster Standard, Through Spindle Coolant Accuracy - ISO 230-2. Positioning - A 0.010 mm, Repeatability - R 0.004 mm, Machine Size, Machine Dimensions (WxD) 2528 x 3000 mm. Electrical Supply (Input)—Balanced 3-Phase 50 or 60 Hz, Power 25 KVA, Voltage, Compressed Air (Pressure / Flow) 4.9 cfm, Coolant Flow Rate at Cutter 160 L/min. Through Spindle Coolant Pressure 20 bar (Std) Washdown 140 L/min Control: Fanuc 18iM Specification: Travel X 760 Y 610 Z 610 mm | 12000 RPM | BT40 Accessories: 30 tool rapid ATC & swarf conveyor Name of machine: Hardinge Bridgeport XR 760 Rapids: Auto Mode (X and Y Axis) 43 m/mm. Auto Mode (Z Axis) 36 m/mm Pjdjvkwk Aopfx Ah Usrf