Tool and Cutter Grinder

HAAS MULTIGRIND AF1

Condition: good (used), TECHNICAL DATA AXLE Rapid feed X,Y: 15000 mm/min Rapid feed A,B: 15000 mm/min Rapid feed Z1,Z2,E: 18000 mm/min Rapid feed C: 90000°/min Smallest input unit: 0.001 mm Smallest input unit, C-axis: 0.001° MACHINING PERFORMANCE Max. turning diameter: 20 mm Max. Headstock stroke: 205 mm Max. Drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. Tapping capacity: Stationary: M10 x P1.5; Driven: M6 X P1.0 MAIN SPINDLE Spindle speed: 500 - 10000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm WHEELING SPINDLE Max. Clamping diameter: 20 mm Max. Part length for ejection to the front: 150 mm Max. Clamping length: 75 mm Spindle speed: 500 - 10000 rpm Pick-up spindle motor: 2.2 / 3.7 kW Pgjdpfeu Uic Tjx Ag Ten Indexing angle: 1°, 15° CONFIGURATION Operation mode: Right-handed Dimensions: 2700 x 1400 x 2400 mm Weight: 3400 kg SCOPE OF OFFER U.A: (list not exhaustive) Control system: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson Transformer Hydraulic unit Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of supply according to photo gallery We assume no liability for the correctness, completeness and up-to-dateness of the information.

Condition: excellent (used), Year of construction: 2016, operating hours: 200 h, functionality: fully functional, total height: 1,760 mm, total length: 1,100 mm, total width: 850 mm, workpiece weight (max.): 12 kg, spindle speed (max.): 10,000 rpm, spindle speed (min.): 500 rpm, feed length X-axis: 100 mm, feed length Y-axis: 190 mm, feed length Z-axis: 325 mm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 520 kg, grinding length: 270 mm, rotational speed (min.): 500 rpm, rotational speed (max.): 10,000 rpm, center height in crank: 220 mm, center height: 300 mm, collet bore: 25 mm, grinding spindle speed: 10,000 rpm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, pivoting range: 360 °, travel distance X-axis: 100 mm, travel distance Y-axis: 190 mm, travel distance Z-axis: 325 mm, center width: 620 mm, grinding spindle motor power: 1,100 W, table length: 190 mm, table width: 200 mm, table height: 1,020 mm, power: 1.1 kW (1.50 HP), height adjustment type: electric, workpiece diameter (max.): 400 mm, input current: 20 A, grinding diameter: 300 mm, input frequency: 50 Hz, disc diameter: 125 mm, input voltage: 280 V, space requirement width: 2,000 mm, space requirement length: 1,800 mm, space requirement height: 1,800 mm, grinding wheel speed: 10,000 rpm, year of last overhaul: 2022, distance table to spindle center: 325 mm, tool diameter: 300 mm, workpiece length between centers: 270 mm, distance between centers: 270 mm, number of spindles: 1, Equipment: rotational speed infinitely variable, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 12000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2016 S25 003004 V, 50/60 Hz, with CEE plug and cable Color: light gray motorized height adjustment, axial grinding spindle adjustment Equipment: * Opto-electronic measuring device with measuring electronics Image processing, PC (Original ISOG) * CCD camera and monitor * Dividing head Sk 40 with dividing disk 24 R * 1 dividing disk each 14, 16, 18 * Tightening screw M 16 * Counter bearing complete with 4 center punch points * Center point Sk 40 with driver * Twist-u. Relief grinding device with rack housing * Dust extraction completely without vacuum cleaner * LED machine light * Tooth support complete with support and sliding blades * Setting gauge * Universal setting gauge * Handwheel facility * Dressing device with 3 diamonds * 1 set of collets 1.0 - 17.5 mm by 0.5 mm rising * Pliers sleeve and extraction nut and key * 10 pieces of direct collets Sk 40 6 - 25 mm * 4 cone reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * Clamping nut * 12 grinding wheel chucks * Tool cabinet with shelves * 2 protective hoods * various diamond / borazon discs * Operating instructions and key, spare parts list, circuit diagram * Set of technical grinding instructions Psdpfew U Ehbex Ag Tjgn ##### Machine is partially overhauled and has an electrical acceptance report!#####

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, For sale: (For more extensive technical data, see PDF) Technical details of the machine: - Long-tube filling system with 40 filling valves and 8 KK plungers. - Pre-evacuation system to reduce oxygen intake. - Hygienic bottle table and stainless steel components for durability. - Mechanical adjustment range: 3,000 to 15,000 bottles/hour. - Performance range: 0.33l LN 3,000–13,500 bottles/hour, 0.5l NRW 3,000–12,000 bottles/hour. - Minimal oxygen intake: maximum 0.02 mg O2/l. - Conversion parts available for different bottle types (0.33l longneck, 0.33l Steini, 0.5l NRW). Advantages of the machine: The machine offers numerous advantages that enhance the quality of the filling process. - Gentle, product-friendly filling under CO2 atmosphere. - 50–60% less CO2 consumption compared to short tube filling systems. - High longevity thanks to reinforced drive components. - Hygienic design for easy cleaning. Pgedpfx Agewqz Nns Tsn - Short changeover times. - Convertible to cans according to manufacturer specifications (conversion kit not included). Low operating hours: 3 days per week, 7 hours each; rarely operated for 4 days per week. Annual maintenance by the manufacturer. The machine is immediately available; it was only removed from production about 5 months ago. Original purchase price was approx. €330,000.

Condition: used, Year of construction: 1992, spindle speed (min.): 7,500 rpm, spindle speed (max.): 24,000 rpm, 4 motorized grinding spindles (liquid-cooled, purge air / oil mist lubrication) including REFU HF frequency converter, e.g. for powering the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 Pgodpfx Agsl Tn Afj Ton 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Converter 316/25 High-frequency converter (inverter, frequency inverter) Frequency converter / inverter for powering motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional, sold as is – manufacturing year approx. 1992 A collection of various grinding spindle shafts / arbors for grinding wheels is available for these spindles and can be purchased separately. Price / details on request All technical data subject to error or omission. We sell exclusively to countries within the European Community.

Condition: good (used), functionality: fully functional, For sale is a pallet wrapper from Strapex, model Delta SWS 18. The unit has been dismantled for transport, but is fully operational and ready to use after reassembly (example image shown is the original manufacturer's image). Technical Data: • Turntable diameter: 1800 mm • Maximum stretch wrapping speed: 10 rpm • Weight: 350 kg • Manufacturer: Strapex • Maximum load weight: 1500 kg • Power supply: 220 V • Wrapping options: - Top sheet wrapping - Bottom wrapping - Top wrapping - Cross wrapping - Spiral wrapping Transport and loading can be organized Europe-wide at an additional cost, upon request. All prices are exclusive of VAT. An inspection is possible by appointment. Please contact us – our team looks forward to assisting you. Pgodpfxjwza Dxe Ag Tjn Trade-in or exchange possible! Machine purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your equipment? For more information or contact options, please visit our website.

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Podpov N Di Aofx Ag Tjgn Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: used, Year of construction: 2014, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✨✨Buy directly from the manufacturer and benefit from price and quality advantages!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ✅Contents of the system: ►1 unit - Gas-heated large powder coating oven ►1 unit - Automatic powder coating booth ►1 unit - Electrically heated small powder coating oven ►2 units - Room-type monocyclone manual powder coating booth ►6 units - Automatic powder coating gun ►3 units - Manual powder coating gun ►1 unit - Automatic powder recovery unit ►6 units - Monocyclone ►1 unit - Automatic control panel ►1 unit - Automatic rod movement system, speed-controlled ►2 units - Movable platform, speed-controlled ►8 units - Parking station ►300 m - Conveyor rail, 1000 kg capacity ►12 units - Rods for hanging Our system is located at Anhaltstr. 30, 14943 Luckenwalde. You can schedule an appointment to view the machines. The system has been in operation for 10 years. Pgedpfx Aeiivq Uog Tjn Since we are the direct manufacturer of the system, we can make any desired modifications to the machines by mutual agreement. Does it not fit into your existing assembly area? Then we can make changes to the layout. Please check the PDF file of the system using the link below.

Condition: good (used), Year of construction: 2006, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 813 mm, overall weight: 13,611 kg, table length: 1,626 mm, table width: 914 mm, controller model: HAAS, nominal power (apparent): 22 kVA, rotary table diameter: 760 mm, spindle speed (max.): 6,000 rpm, table load: 4,536 kg, Equipment: chip conveyor, IBN 03/2006 IKZ 70 bar (TSC 1000) WZW 30-fold (BT50) Pedjvgmr Iopfx Ag Tjgn Full 4th axis Spindle & gearbox new in 2017 1-shift operation Machine can be inspected under power !!!! free loading until CW04/2025 !!!! (with same-day delivery of our new machine)

Year of construction: 2019, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: MISCO1082, Oil Mist Collecting and Regaining. MISCO is used for collecting and getting rid off the oil in the CNC machines cabin. It is a water vapor, aerosol, smoke, oil mist filtering / separating device. Also allows condensing and recycling the condensed liqud back to the sump The particulate-smoke-gas-water in the air sucked in is filtered through the vapor separation units. The saturated oil-water etc. contained in the air is also separated and recovered, and the air is cleaned by 98% of the dry air. Removal of parts washing machines vapor-mist, Welding fumes, Oily air off CNC machines In the industry and even In the industrial kitchens a lot of oil mist, various gases, fumes and dusts are mixed into the air and create a risk of fire. In addition, they are inhaled by workers and cause damage especially to the lungs, respiratory tracts and other vital organs. For this reason, harmful substances such as gas, dust, smoke and similar substances must be cleaned by absorbing harmful substances in terms of safety and health. Pgodsd Nwk Uspfx Ag Ten Application Areas: CNC Machines Welding fumes, Allows removal of oil vapor and recovery of existing fluid in CNC machines Automotive - Metal Processing – Food Industry - Industrial Kitchens - Steel - Casting - Chemical Industries etc. Working Principle; 1-Entry of dirty smoke –vapor- mist 2- Condensation with laminar flow over the walls 3- Disintegration of the particles passing through the filter 4-Recycling of condensing liquid 5-Dry and clean air evacuation For detailed information please contact us. mistcollector, cnc cutting oil, fume removal, cutting oil fume collector

Condition: like new (used), Manual profile grinder UTMA model P20 Pgsdsff H E Repfx Ag Tjn