Vertical panel saws Harwi Orca 2150 2016

Harwi Orca 2150

Condition: used, machine/vehicle number: 007913, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Kwedpfx Abjwkf Dvevew Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: ready for operation (used), Year of construction: 2019, This Felder FORMAT 4 Tempora60.06LX edgebander was manufactured in 2019. It features an x-motion PLUS control system, chain feed with a speed of 10 m/min, and a Teflon-coated gluing unit for EVA or PUR granulate. The machine supports edge thicknesses from 0.4 to 3 mm and includes a multifunctional milling unit. Consider the opportunity to buy this Felder FORMAT 4 Tempora60.06LX edgebander. Contact us for more information about this machine. Kjdpfjx D D R Ssx Abvoww Application Types Edge Banding

Condition: new, Year of construction: 2026, Engine power 5HP Blade diameter 250mm Kjdpfxeu Rqq Hs Abvjww Blade revolutions per (min) 5300 Automatic pneumatic movable table Galvanized iron and polyzene supports √ Maximum horizontal cutting length 4200mm Maximum vertical cutting height 2200mm Maximum horizontal cutting height 2080mm Maximum cutting depth 60mm

Condition: used, machine/vehicle number: 006370, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Kwsdpfxjl Txw Ho Abvjw Operating Units: 12 nr

Condition: excellent (used), Year of construction: 2005, 3-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data input via membrane keypad Electronic scoring unit adjustment Automatic parallel fence with adjustment via leadscrew and linear ball bearing guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis with corresponding fine adjustment. Angle detection system using magnetic strip and LCD display. Crosscut stop with 3 LCD displays Extendable support table with roller support Technical Data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scoring blade diameter mm: 120 Panel cutting size with extendable stop mm: 3200x3200 Swivel range degrees: 0° / +46° Max. cutting height at 90° mm: 150 Max. cutting height at +45° mm: 130 Saw blade rotation speed rpm: 2500, 3500, 5000 Scoring blade speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scoring unit power Hz 50 kW: 0.75 Cutting width with parallel fence mm: 1270 Weight approx.: 1180 kg Kodpfx Aeyftzkjbvoww Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-location, loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty or guarantee. The buyer is welcome to inspect the machines at our premises. • Special agreements are only valid in written form. (We only respond to inquiries including your address & telephone number!)

Condition: new, Year of construction: 2026, Size: 6 Nominal heat output: 170kW -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed For rooms of: 4.800 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes fuel consumption: 40 - 50 kg/h Blower air capacity, free blowing: 14.000 m³/hour Outlet opening: Ø 700mm Flue pipe connection Ø 220 mm Kodjdlhdbepfx Abvsww Weight: 2.150 kg SPS control cabinet: 380 Volt

Condition: used, Year of construction: 2017, Direct Numerical Control NC HOPS with Campus software Working range in X axis mm 3400 Working field in Y axis mm 1600 Working field in Z mm 300 Worktop with 6 adjustable bars No. 3 suction cups each work bar for holding the piece being processed N° 1 5-axis electrospindle, 10 KW, with automatic tool change, Hsk F63 type cones Boring head with 24 spindles as follows: N. 12 Y-axis vertical spindles N. 6 X-axis vertical spindles N. 4 horizontal spindles Y axis N. 2 X-axis horizontal spindles Automatic tool change system with 18 positions - positioned on the back of the machine Frontal protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the switchboard No. 1 vacuum pump Kwjdpfx Aewwiybebvjw

Condition: ready for operation (used), motor power 11kW working pressure 10bar Kwsdpjnr Hhiofx Abvew capacity 1,59m3/min

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,935 mm, travel distance Z-axis: 275 mm, number of axes: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine includes a vacuum system, a conveyor belt for chip removal, and a liquid cooling unit. If you are looking to get high-quality CNC machining capabilities, consider the Biesse Rover C9.50 machine we have for sale. Contact us for more information. Worktable and clamping • 8 ATS plate holders (L = 1525 mm) and 24 slide rails • Automatic positioning of plate holders and slide rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), with pneumatic system • 4 removable center stops, stroke 140 mm (2 left + 2 right), with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules)Vacuum • Vacuum system for a 250 m3/h pump Kodpfx Aox D H Hcjbvsww • 250 m3/h rotary vane vacuum pump for standard vacuum systemMachining units and configuration • Composition C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a work unit with 5 interpolating axes (units usable only when the electric spindle is vertical) • Composition C3-P2: • Additional Z slide for rear work units, controlled by an independent Z axis • BH 42 L drilling head • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle)Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional equipment • Conveyor belt for removing chips and scrap pieces (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles, or one electric spindle plus one liquid-cooled drilling head)Note: The technical data and descriptions are taken from the original order confirmation and are for information only; they are not binding.

Condition: new, Panel saw HOLZ-HER 1255 SECTOR pro - Exhibition machine - Cutting height 2,200 mm Cutting length 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience and a rock-solid design that offers you a unique price-performance ratio. offer you a unique price-performance ratio. Your advantages: - Fully welded frame Extremely high rigidity - Precise cutting quality - Finished cut for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel layout with a installation area from 4 m² - Smooth and ergonomic operation TRK extraction system (optional in all CE countries): Workstations must meet the highest requirements when it comes to health and safety. HOLZ-HER saws are among the cleanest and safest in the safest in the world. Accessories The extensive range of accessories extends from convenient digital dimension displays through to our our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting panel-shaped wood materials wood-based materials such as chipboard, MDF, veneer panels, multiplex, etc, veneer panels, multiplex etc. Basic machine: Completely welded frame with extremely high rigidity. Precise guidance of the saw beam / saw unit saw unit for an accurate cut. Manual feed feed for vertical and horizontal cutting. Cutting depth: max. 60 mm Saw beam: Ksdpju R Syijfx Abveww Sturdy saw beam guided on precision guides. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in vertical cut Saw unit: Smooth and ergonomic operation for plunging and and removal of the saw unit. Immersion lever can be lever can be folded down in the upper position for precise immersion of the saw unit. Generously dimensioned lever for easy pivoting. Housing cover opens the complete opens the complete saw unit for easy tool change change incl. ProLock quick-action chuck. Light cut-out: Riving knife can be retracted. Control panel: Efficient operation of the machine. Ergonomically positioned at eye level. Lower workpiece support: Sturdy, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through Extraction: Effective extraction with two connections: Saw unit Ø 120 mm, frame end Ø 100 mm (with TRK variant) Lifting roller transport system: Manually liftable and lowerable rollers for easy and and gentle panel transport. Measuring tape: For displaying dimensions for horizontal cutting with three manual dimension displays: Absolute dimension from the lower workpiece support Absolute dimension from the middle workpiece support Serial cuts from the top edge of the panel This offer is an equipment package. The following items and options are already included in the price: - Sliding grid - Manual longitudinal stop for vertical cutting - Digital dimension display for horizontal cut - 3 adjustable stop points in the saw beam - TRK SH 2.200 suction device - Strip stop for recurring horizontal cuts - new exhibition machine -