Milling machine

HERMLE UWF 900 E

Condition: good (used), Year of construction: 1995, Travel: X = 600, Y = 400, Z = 420 mm Speed range: 20 – 4000 rpm Gear stages: 3 Taper: SK 40 Quill stroke: 75 mm Spindle motor: 5.9 kW Feed range: 1 – 5000/6000 mm/min (manual/programmed) Rapid traverse x, y: 7 m/min Rapid traverse z: 6 m/min Clamping surface: 900 x 458 mm Weight: approx. 2300 kg Hodpfsw Uin Ssx Ab Row With coolant system, electronic handwheel, various tools (without cabinet)

Condition: used, Year of construction: 1990, x-travel 600 mm y-travel 400 mm z-travel 420 mm control TNC 355 Heidenhain Main spindle: turning speed range - main spindle 20 - 4.000 min/-1 power capacity - main spindel 7 kW transmission ratio 3 tool taper SK 40 distance spindle /table 127 - 567 mm spindle diameter in front bearing 55 mm stroke of quill vertical 75 mm tool clamping 10 kN swivellable +/- 90 ° work table: table surface area 900 x 458 mm T-slots 7x 63 x 14H7 feeds: feed range 1 - 5.000 mm/min Feed force 5,4 kN rapid traverse ( X / Y / Z ) 7 / 7 / 6 m/min total power requirement 13 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 4,0 x 4,0 x 2,1 m Hedpfstqmm Ajx Ab Rew Tool Room Milling Machine - Universal HERMLE - UWF 900 E - Spindle-Head swivable +/- 90°

Condition: used, CNC universal tool milling machine HERMLE type UWF 900 E Machine No. 10829, Year of manufacture 1995 CNC contouring control Heidenhain TNC 415 B NC software 280540, PLC software 277677 06 Travel paths X: 600 mm, Y: 400 mm, Z: 400 mm Table size 900 x 458 mm Spindle mount ISO 40 Distance table to spindle nose 40 to 440 mm Spindle speed 20 - 4000 rpm, continuously variable Feed rate 1 to 3000 mm/min Rapid traverse X and Y = 7 m/min. Z = 6 m/min. Spindle drive 7 kW Quill stroke (vertical head) 60 mm - Spindle speed via 2 gear stages and continuously variable via frequency converter - Hydro-mechanical tool clamping vertically and horizontally - Thread cutting without compensating chuck - Electronic handwheel - RENISHAW 3D scanning head - Coolant system adjacent, capacity approx. 130 liters - Automatic central lubrication system Hedpfxewaaqis Ab Rjw - Fixed angle table - Fully protective cabin - 32,279 recorded spindle operating hours - Pivoting control panel - Operating instructions and electrical diagram Space requirements L x W x H 2700 x 3500 x 2100 mm Weight 3 tons.

Year of construction: 1989, condition: used, control: Heidenhain TNC 355 table size: 900 x 465 mm travel: X-600 mm, Y-400 mm, Z-420 mm Hjdpohd Rm Uefx Ab Rew tool taper: SK 40 quill stroke: 75 mm spindle speed: 20–4000 rpm feed: 1-5000 mm/min

Year of construction: 1990, condition: ready for operation (used), Year of manufacture: approx. 1990, travel X/Y/Z: 600mm/400mm/420mm, speed: 4000rpm, tool holder: SK40, table-spindle distance: 127mm-567mm, spindle head swivel: +/-90°, table dimensions X/Y: 900mm/450mm, feed: 5m/min, rapid traverse X/Y/Z: 7m/7m/6m/min. Machine dimensions X/Y/Z: approx. 4000mm/4000mm/2100mm, weight: approx. 3000kg, control: Heidenhain TNC 355. The controller of the motor spindle has problems. Documentation available. On-site inspection is possible. Hedpfewynvyex Ab Rsw

Condition: used, Table size 900 x 460 mm X/Y/Z - 600/400/420 mm Spindle speeds 20-4000 rpm Spindle taper ISO 40 Hydraulic tool clamping Quill stroke in vertical head Vertical head swivels +/- 90 deg. Hsdpfx Absl Dvx Ee Rsw Tool changer w/32 stations Control: Heidenhain TNC 407 Equipped with: Vice 19 tool holders Coolant

Condition: good (used), Year of construction: 1991, Travel range: X= 600, Y= 400, Z= 420 mm Speed range: 20 – 4000 rpm Hedjwvif Uspfx Ab Rjw Gear stages: 3 Spindle taper: SK 40 Quill stroke: 75 mm Spindle motor: 5.9 kW Feed range: 1 – 5000/6000 mm/min (manual/programmed) Rapid traverse x, y: 7 m/min Rapid traverse z: 6 m/min Clamping area: 900 x 458 mm Weight: approx. 2300 kg With coolant system, electronic handwheel, measuring probe (defective)