Edgebander

HOLZ-HER 1449 Accord

Year of construction: 1998, condition: excellent (used), Panel saw for Plexiglas and wooden panels with suction device very good condition Max cutting height: 2200mm Max cutting length: 4200mm Max. cutting thickness: 60mm Length: 5600mm Depth: 1400mm Height: 2900mm Njdoinunqspfx Ahzect Weight: 850kg

Year of construction: 2006, condition: good (used), FIN Glue spreader SC2R/1300 with 2 rollers Ncodpjfguntofx Ahzst The year 2006 manufacture: FIN s.r.l. Italy main technical specification: Width of working: 1300mm The maximum passage between roller: 120mm The diameter of rollers: 185mm Advancement speed: 19m/min Net weight 390 Kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 200 x 153cm 400 V, 50 Hz, 037 kW Accurate and uniform spreading with any type of glue, excellent technical characteristics, added to the high practicalness, functionality and safety for the operator, place it at the forefront among the 2 roller glue spreaders. Spreading roller covered in antiacid rubber, ground and furrowed, hard wearing, as they are built with a rational layer of rubber it is, therefore, possible to carry out 6-7 grindings. It is easy and quick to disassemble. Spreading, precise and uniform on one or both sides of the panels. Special shock-absorbers, on the roller supports, allow the rollers an automatic opening depth, so as to spread panels of different thickness within 5 mm. they also compensate for eventual parallelism differences of the panel. Uniform glue dosing by a rectified distribution tank, in sheet-iron, with very quick extraction to allow cleaning. Collecting tank, for glue and washing water, in galvanized sheet-iron, extractable for easy cleaning. Safety protections, in sheet metal on the rollers and glue distribution tank, a sheet metal protection prevents the introduction between the rollers of any object more than 5 mm. thick over the transit established, ensuring the maximum safety for the operator. Electrical installation, in a waterproof case with fuses, thermal switch for motor and transformer protection. Control panel, with starting button, stopping button and warning light (24 V). Rollers rotation chain with self-registrable turnbuckle pinion. Roller washing with a bored washing tube, for the water intake during this operation.

Condition: ready for operation (used), A vertical panel saw Holz-Her is available. Cutting length: 2200mm, cutting height: 30mm, number of saw blades: 3, saw blade diameter: 300mm, panel thickness: 0mm-30mm/30mm-70mm, clamping surface X/Y: 2200mm/5300mm, vertical stroke: 2200mm, horizontal stroke: 5300mm, speed: 4420rpm, machine dimensions X/Y: 6400mm/2900mm, weight: approx. 1000kg. Including 2x 3-part folding rails and 2x adjustable longitudinal stops with scales. Documentation available. On-site inspection is possible. Njdpfxowftb Ss Ahzect

Condition: used, machine/vehicle number: 006290, Max working width: 1300 mm Max. machinable height: 100 mm No of Rollers: 2 Ncjdpfxeu A Evhe Ahzjt

Year of construction: 2026, condition: new, Vacuum membrane press VPR-4000 is a universal press for woodworking and thermoforming. The VPR-4000 press is also tiltable and mobile. Applications: Veneering / Form gluing / Wrapping... Coating of various profiles (veneer, paper, plastic, etc.) Wood bending: production of curved and laminated components Vacuum system: Working surface with vacuum channels for even negative pressure, even with large workpieces. Becker vacuum pump / oil-free / tank capacity 100 l Working area: 4000 x 1500 mm Pump power: 0.75 kW Vacuum pump flow rate: 40 m³/h Rubber membrane External dimensions: 4100 x 1650 x 1000 mm Weight: 400 kg Location: Ex stock 54634 Bitburg - Free loading on truck - Ncedpsyr R Hwofx Ahzot

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Cutting length: 5300 mm Cutting height: 2200 mm Vertical panel saw for cutting sheet-type wood materials such as chipboard, MDF panels, veneer panels, multiplex, etc. Base machine Completely welded frame with extremely high rigidity Precise guidance of the saw beam / saw unit for accurate cutting. Automatic feed for vertical and horizontal cuts. Cutting depth: max. 60 mm Saw beam Sturdy saw beam guided on precision rails. Pneumatic latching of the saw beam in the upper and lower positions. Electric monitoring during vertical cuts Saw unit Smooth and ergonomic operation for plunging and retracting the saw unit. Plunge lever can be folded down from the upper position for precise entry. Generously dimensioned levers for easy swiveling. Housing cover opens the complete saw unit for easy tool changes, including ProLock quick-release chuck. View opening: riving knife can be retracted Automatic functions Ncodpeyuld Ajfx Ahzet Automatic plunge, cut-through, retract, and stop or Automatic plunge, cut-through, retract, and return Shortened return travel (selector switch) The shortened return travel of the saw beam prevents unnecessary travel paths of the saw unit (short workpiece positioned on the right) Speed control: infinitely variable from 6 - 24 m/min Cutting depth: max. 60 mm Control panel Efficient operation of the machine. Ergonomically mounted at eye level. Lower workpiece support Stable, wear-free stainless steel support. Support up to the cutting line: narrow workpieces cannot tip or fall through. Extraction Effective extraction with two ports: saw unit Ø 120 mm, frame end Ø 100 mm (for TRK version) Lifting roller transport system: Manually raiseable and lowerable rollers for easy and gentle panel transport. Measuring tape For dimension display in horizontal cutting with three manual measurement displays: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Series cuts from the top edge of the panel Powerpackage The package consists of the following options: 1. TRK extraction system 2. SuperCut scorer 3. Vertical digital display 4. Stepless speed regulation Saw unit 7.0 kW, 1100–5500 rpm, 400 V, 50 Hz Incl. HW circular saw blade Ø 250 x 30 x 3.2 mm, Z 48, hollow-flat tooth TRK system according to CE guidelines SH 2200 (less than 2 mg fine dust/m³ of air) – mandatory for all CE-required countries (extraction system provided by customer) Pneumatic shifting grid Continuous shifting grid over the entire machine length for stable workpiece support. Automatically, pneumatically retracts during horizontal cuts. Prevents the shifting grid from being cut during horizontal cuts. Digital measurement display for horizontal cutting on the control panel Incl. electric fine adjustment Display of: Absolute measurement from the lower workpiece support OFF-Set measurement from the middle workpiece support Series cuts from the top edge of the panel Saw blade compensation (saw blade thickness can be individually programmed) If the unit is operated via the brake at the ba... (text cut off)

Condition: new, F 45 ProDrive:The new F 45 is a masterpiece of technology and design. The machine stand, which has been redesigned from the ground up, exceeds all previous values in terms of torsional rigidity and low eye-level control, with which you can call up the height and tiltof the saw blade plus, depending on the control package selected, the speed andother functions.3.5" color screen with separate keyboardAutom. Automatic dimensional correction at the parallel and angle stop when swivelling the saw unitSimple calibration of the axesMachine diagnostics, operating hours counter, USB interfaceCalling up the last dimension entry (back function)99 storable cutting programsGrooving: with automatic step-by-step positioning of therip fence400V / 50Hz - Europe , scale: scale in mmM44249machine height 910 mmM64099eye-level operationbasic equipmentThe control panel of the F 45 is mounted at eye level. This means that all axes can be conveniently controlled and all settings are in -hand operation of the swing-away deviceM64096max. blade diameter 450 mmBasic equipmentThe F 45 is equipped with a parallelogram guardwith two hoods for 90° and angle cuts.{They are infinitely adjustable in large pressure roller in the infeed automatically adjusts theguard to the workpiece maximum saw blade diameter is 450 mm. This achieves a saw blade projection of max. 154 mm.M511005.5 kW (7.5 hp)optionalone-sided swivel saw unit with 5.5 kW (7.5 hp) motor,manuallyadjustable to 3/4/5000 rpm. Swivel range: 0 - 46°AKE quick-change system for the main saw bladeThe motors have 20% more torque than standard electric motors with the samepower consumption.M24038Preparation for 2-axis scoring unitOptionScoring unit preparationfor retrofitting a scoring unitM41010Table top extension 840 mmBasic equipmentTable top extension 840 mmconsisting of a CDF panel with HPL coating on both sides. Itis particularly scratch and impact resistant.M34204Double castor trolley with trolley length 3200 mmOptionDouble castor trolley, trolley length 3200 mmThe Altendorf double castor trolley can be locked in any position. Thedouble castors, made of hardened steel, holdthe upper carriage in conjunction with the lower carriage absolutely precisely in thehard chrome-plated guide rods. The carriage construction is designed as an extremely torsion-resistant and dimensionally stable multi-hollow chamber system. The table surface is anodized.A hard chrome-plated round bar serves as a mount for the cross slide and as an interface for various accessories.M44404Angle mitre fenceOptionAngle mitre fence, cutting to length up to 3500 mmThis Altendorf-patented fence with integratedlength compensation facilitates the precise cutting of 90° angles andmitres in one function. In the front and rearstop position, the swivel angle is infinitely adjustable by 49° andis indicated by a measuring scale. Simply move the fence ruler to theselected angle dimension according to the scale and then set the desired lengthon the fence cut-to-length dimensions from approx. 1700 mm, theroller-supported and stable telescopic extension takes over the outer fence entire cross slide is supported by a precision-manufactured,prismatic support of the round bar of thedouble roller carriageIncluding: two single tilt stopsM44441CNC parallel fence 1000 mmOptionCNC parallel fence, cutting width 1000 mmThe CNC-controlled parallel fence can be controlled at a traversing speedo... Nsdpfevzhdzex Ahzjct

Condition: used, machine/vehicle number: 006603, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Nodpsyngz Aefx Ahzect Corner Rounding Unit: yes Max feed speed: 14 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, Year of construction: 2008, machine/vehicle number: 21543, SECOND-HAND 2 ROLLERS GLUE SPREADER OSAMA S2R 1300 - CE RULES - Chiller (Heat conditioner) Cooling system for vinyl glue, urea glue and polyurethane glue for rollers gluing machines with two and four rollers. This device is required to maintain the glue temperature between the rollers always constant, and to ensure the scheduled pressure time even with high temperatures - Mixer CLT-A (Automatic feeder for bi-component glue) Automatic mixing and feeding system of two-components vinyl and urea glues with catalysers, sulphate and isocyanate, for rollers gluing machine. This device is required for production in continuous. Standard version includes a mixing head mounted on the gluing machine, fed by special pumps for glue and catalyser. The pumps take the products directly form the storage tanks and they are activated by the level sensors placed between the rollers, thereby ensuring a constant level of glue. - Automatic washer for rollers Ncsdpfx Aor Ixy Iohzjt - N. 2 rollers - Volt. 400/50 - SN 21543 - Year 2008

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2540x2900x850 mm Weight 1200 kg Ncjdpfxsvz E Ikj Ahzjt Total power requirement 5,5 kw