Edge banders Holz-her Accura 1558 performance 2016

Holz-her Accura 1558 performance

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, HOLZ-HER Edgebanding Machine ACCURA 1558 performance with BELT BRIDGE and intelligent equipment package for edge thicknesses up to 15 mm. Easy program selection and tool adjustment via the 18.5" color touchscreen (16:9). Short heating time for the GlueJet (GJ 301 automatic) adhesive system—around 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Swapping PUR adhesive and cleaning the system is effortless and takes just a few minutes. Axis adjustment via high-precision, repeatable servomotors. Special configuration for protective film materials, such as high-gloss and super-matt! One of the absolute highlights of this machine is the multifunction package, which excels with businesses processing a wide variety of edges. The DIA tools are multi-stage and can switch between radius and chamfer as needed—from the longitudinal milling unit to corner copying and the profile scraper blade. The extendable workpiece support and the extended infeed area with air cushion table provide support for large workpieces. A guidance system assists in feeding small workpieces into the machine. Edge thickness (roll material): 0.4 – 3 mm (material dependent) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet in EVA and PUR quality, minimal effort required. Knsdpfx Aeyfgrpsnxob Processes all standard edge types, including high-gloss & super-matt, as well as solid wood edges up to 15 mm. Motorized adjustment of the infeed fence Narrow part guidance system Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunctional units for rapid changeover between radius, flush, and chamfer processing Spraying units, vertical & horizontal and much more. Delivery, installation, and commissioning of the machine can be offered directly by us for an additional charge. The machine is currently located at our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, the German version shall prevail. Our terms and conditions can be found on our website at holzher.de/en/terms-and-conditions.

Condition: new, Technical data: Max saw diameter: 400 mm Min saw diameter: 250 mm Saw spindle diameter: 30 mm Scorer diameter: 120 mm Scorer spindle diameter: 20 mm Scorer on a separate engine Manual saw height adjustment Tilting saw at an angle from 0° to 45° Manual adjustment of the saw angle Carriage length: 3200 mm Carriage lock Work table: 1450 mm x 1030 mm Table height: 920 mm Table extensions 2 x Culaga Guard Safety switch Power supply: 380 V Main engine power: 7 kW Overall dimensions: Length: 3430 mm Width: 1900 mm Height: 1560mm Knjdpfx Anov S Uz Ijxob

Condition: new, Year of construction: 2023, Product: CGM e41 Continuous 3-phase power: 41.0 kVA / 32.8 kW Maximum 3-phase power: 45.1 kVA / 36.0 kW Voltage: 230 /400 Volt Frequency: 50Hz Phases: 3 Engine: Model: Yanmar 4TNV98T-ZGECS EU Stage IIIA approved for stationary operation only Cooling system: Water Fuel: Diesel Cylinder: 4 Displacement: 3319 cm³ Intake: Normal Engine speed: 1500 rpm Consumption at 3/4 load L/h: 8.5 Generator: MECC ALTE Type: brushless AVR control Digital control ComAp AMF Dimensions and weight: Length: 2000 mm Width: 850 mm Height: 1275 mm Knjdeq A U Aijpfx Anxsb Weight, dry: 880 kg Tank capacity: 200 l Oil pan Cooling water preheating Battery charge retention 3-way valve Sound insulation hood: RAL 5015 sky blue Base frame: Black

Condition: excellent (used), functionality: fully functional, Holz Her Auriga 1308 XL FÜ + PU compact design - edge thickness 0.4 - 8 mm SPS-based Edge-Control PPC 231 touchscreen control system motor-driven, position-controlled bridge height adjustment pre-milling unit for attachment before the gluing section fully automatic edge magazine for roll and strip material GLU JET cartridge gluing station + PU gluing Kjdpfjzib Niex Anxjnb glue application via nozzle technology workpiece height 6-60 mm automatic glue height adjustment pressure unit 1912-3, pneumatic trimming unit 1918, pneumatic, for roll and strip material up to 8 mm edge thickness with pneumatic adjustment for 0-10° bevel of the trimming saw milling unit 1827 MOT 4, flush trimming 8 mm, radius milling - bevel milling - 15° MOT NC axes controlled via control panel profile milling unit 1832 pneumatic, rounding of corners up to edge thickness 3 mm in a single pass scraper blade unit 1929 MOT2 for bevels and radii with 2 scraper blade holders, NC axes controlled via control panel surface scraper blade unit - finishing buffing unit - polishing spraying system at the infeed and outfeed complete tool equipment included first delivery 2013 machine is FUNCTIONALLY TESTED and in TOP CONDITION available from warehouse Lieboch

Condition: excellent (used), Year of construction: 2021, operating hours: 140 h, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 29 A, working width: 3,050 mm, We offer this very good HOMAG DRILLTEQ V-500 throughfeed drilling machine, year of construction 2021. Working dimension X 3.050 mm Working dimension Y 1.250 mm Working dimension Z 80 mm Number of milling spindles 1 Main motor power 10 kW Rotation speed max 24.000 rpm Tool clamping system HSK-F63 Tool changer positions 4 Vertical drilling spindles 15 Horizontal drilling spindles in X 6 Horizontal drilling spindles in Y 4 Kjdsylp Sljpfx Anxsnb Groove saw 90° turnable Vertical working surface Machine table Feed-through technology Special workpiece clamping system clamp gripper Barcode reader Safety device enclosed cabin Control Homag powerTouch, HOMAG POWER CONTROL Software HOMAG WOODWOP 7.2 Conformity marking CE mark Category: Machining centre Type designation: DRILLTEQ V-500 Subtype: OPTIMAT BHX200 Machine number: 0-250-73-7195 Wiring diagram: 0-250-73-7195 Supply voltage: 400Y/230 V Neutral conductor: yes Phases: 3 Frequency: 50 Hz Maximum operating full load current: 29 A Fuse rating: 35 A Control voltage: 24 V If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2001, CNC turning machine Knjdpfxsk Hz Iws Anxjb Manufacturer: OKUMA Type: LB-250T Model: OSP-U10L YEAR OF MANUFACTURE: 2001 2-axis CNC turning machine with robotic loading Description: Two-axis X-Z turning machine for short workpieces, equipped with a robotic workpiece magazine X-AXIS: 180 mm Z-AXIS: 325 mm Spindle speed: 4500 rpm Coolant system and chip conveyor

Condition: good (used), machine/vehicle number: 2029, Printing press Boston Tiegel A4+ Hohner Tiegel, electric/with motor, machine number 2029, in good condition, immediately available. 2 machines available. If you are interested, we would be happy to inform you about other machines in our facility. You are welcome to inspect the machine at our premises by prior appointment. Knsdpfoxc Eucsx Anxeb

Condition: excellent (used), Year of construction: 2022,

Year of construction: 2026, condition: new, The fruit washer with a mill for fruits and vegetables is made entirely of stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water for a pre-wash. Afterwards, they are transported further via the conveyor belt, which thoroughly cleans the fruits with fresh water. After cleaning, the fruits enter the mill, where they are processed with the desired sieve to achieve the required mash consistency. • Easy to clean • Low maintenance requirements • Belt speed is steplessly adjustable in both directions • Equipped with 2 swivel wheels • Equipped with 2 fixed wheels Technical Information • Nominal capacity: 2000 kg/h • Power requirement: 3 kW, 400 V, 10 A • Mash discharge height: 1400 mm Knjdjv Srguepfx Anxeb • Connection for washing tank: G 6/4” • Connection for cleaning: G ½” • Material: WNr. 1.4301, AISI 304 stainless steel • Water consumption: approx. 12 L/min Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg

Year of construction: 2000, condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Knsdeghrguopfx Anxsb Manufacturer: SMS MEER Type: RFA 14 Yom: 2000 Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines.