Machining center

HOMAG BOF 211/40/AP

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, workpiece height (max.): 60 mm, workpiece width (max.): 2,800 mm, edge thickness (max.): 20 mm, controller model: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hot melt adhesive tank, pre-press for hot melt adhesive Edge bonding + edge processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sanding machine (1 motor) Unit 7: Belt sanding machine (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Gbjdpfsyttrxex Adboi Distance between feed tracks: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ('as seen and approved') on the basis of photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination location. External reference: 6561

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, number of axes: 4, table length: 4,300 mm, table width: 2,200 mm, number of spindles: 40, tool diameter: 120 mm, TECHNICAL DETAILS Number of spindles for vertical drilling: 30 Number of spindles for horizontal drilling in X-direction: 6 Number of spindles for horizontal drilling in Y-direction: 4 Total number of vertical + horizontal spindles: 40 Number of controlled axes: 4 Maximum tool diameter: 120 mm Table dimensions: 4,300 x 2,200 mm Number of stations in tool magazine 1: 22 Number of stations in tool magazine 2: 8 MACHINE DETAILS Milling motor power: 12 kW Total installed power: 42 kW Control software: BIESSEWORKS Gbsdpfoyq Ez Tsx Adbji EQUIPMENT • Automatic panel loading system • Automatic panel stacking system • Lift table • Conveyor system • Vacuum pump Note: The safety fences at the rear and on the loading table are missing and will only be supplied subject to availability. The machine is sold and delivered as-is, in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial descriptive materials. The buyer has the right to inspect the machine prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7087

Year of construction: 2006, condition: not inspected (used), functionality: unexamined, working width: 1,200 mm, working height: 1,600 mm, working length: 1,200 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum working width: 1,200 mm Maximum working length: 1,200 mm Maximum working height: 1,600 mm MACHINE DETAILS Gbsdpjyqx Ugjfx Adbji Total power: 1.5 kW EQUIPMENT CE marking, safety regulations The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection, and is responsible for the installation, securing, and operational use of the machine at the destination. External reference: 6724

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, working width: 1,935 mm, number of spindles: 40, plate height: 350 mm, working length: 6,200 mm, number of axes: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of edge tape magazines: 3 Number of tool positions in tool magazine: 22 (located at the rear of the machine) Drilling spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X direction: 4 Spindles for horizontal drilling in Y direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Gedpfoyqx U Hex Adbjbi Total connected load: 31 kW EQUIPMENT Suction cups for securing the workpiece Safety mats at the front Vacuum pump Waste chip conveyor Fixed groove unit for slotting in X direction The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the item prior to collection and assumes responsibility for installation, securing, and operation of the machine at the place of destination. External reference: 8105

Condition: not inspected (used), Year of construction: 2012, operating hours: 9,910 h, functionality: unexamined, working height: 45 mm, working length: 2,600 mm, TECHNICAL DETAILS Max. working length: 2,600 mm Max. working height: 45 mm MACHINE DETAILS Total connected load: 6.5 kW Operating hours: 9,910 h The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6063 Gjdsyq Ez Hepfx Adbobi

Condition: not inspected (used), Year of construction: 2010, functionality: unexamined, workpiece height (max.): 120 mm, workpiece width (max.): 230 mm, controller model: Siemens Simatic Panel Touch, workpiece length (max.): 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Minimum working length: 370 mm Maximum working length: 8,483 mm Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed speed: 12 m/min Rubber-coated feed rollers: 1 Toothed feed rollers: 4 Total number of rollers: 5 MACHINE DETAILS Control system: Siemens Simatic Panel Touch Processing unit 1 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 2 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Gsdpjyqx T Ajfx Adbebi Max. tool diameter: 4 mm Processing unit 3 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 4 Motor power: 5.5 kW Shank diameter: 40 mm Shank length: 240 mm Automatic chip ejection power: 24 kW EQUIPMENT Safety standard: EC marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photo documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7243

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, cylinder diameter: 85 mm, working width: 1,400 mm, number of cylinders: 10, working length: 4,000 mm, TECHNICAL DETAILS Max. working length: 4,000 mm Godpfeyqybhox Adbsbi Max. working width: 1,400 mm Number of press cylinders: 10 Cylinder diameter: 85 mm MACHINE DETAILS Heating system: Oil EQUIPMENT System with pre-feed conveyor belt System with outfeed table Safety standard: CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8212

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, working width: 1,300 mm, working height: 110 mm, TECHNICAL DETAILS Max. working width: 1,300 mm Max. working height: 110 mm Min. working height: 8 mm Gedpfx Aoyqynujdbsbi EQUIPMENT Motorised feed rollers 2 brush units The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7615

Condition: not inspected (used), functionality: unexamined, Year of construction: 2008, controller model: HMI PLC KAESER, pressure (max.): 8.5 bar, rotational speed (max.): 2,965 rpm, TECHNICAL DETAILS Engine speed: 2,965 rpm Gbjdoyq Hi Eopfx Adbsi Maximum operating pressure: 8.5 bar Air dryer Model: ABT 102 Max. operating pressure: 21 bar MACHINE DETAILS Control model: HMI PLC KAESER Motor power: 55 kW Voltage: 400/460 V The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7549

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, power: 19 kW (25.83 HP), travel distance X-axis: 4,175 mm, travel distance Y-axis: 1,730 mm, number of spindles: 20, number of tool stations in tool turret 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverses: 8 Number of tool magazine positions: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Gedsyttf Sepfx Adbjbi Milling Unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW Control model: PC85 EQUIPMENT CE marking Front safety guard The machine is sold and delivered in its actual technical and legal condition ('as seen and approved'), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6906

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, workpiece height (max.): 40 mm, edge thickness (max.): 3 mm, feed rate X-axis: 35 m/min, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Gbodpfxoyqybus Adboi Edge scraping unit Glue scraping unit Polishing unit 2 motors Spraying device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure applied with rubber belt Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive Laser system (Model: LaserTec) Roller set for edge pressing with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photo documentation and technical/commercial descriptive documentation. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 5321

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, cutting height (max.): 110 mm, workpiece length (max.): 2,200 mm, workpiece width (max.): 4,300 mm, Equipment: CE marking, TECHNICAL DETAILS Maximum panel width: 4,300 mm Maximum panel length: 2,200 mm Maximum cutting height: 110 mm Maximum feed rate: 100 m/min Main saw blade protrusion: 120 mm Number of grippers: 9 Saw Unit Motor power (saw unit): 18 kW Motor power (scoring unit): 2.2 kW Maximum feed speed: 150 m/min MACHINE DETAILS Control system: Windows XP Machine programming software: OSI FEATURES Quick saw blade change Second flexible pusher Panel rotation station Loading of thin sheets CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is, and as inspected”) on the basis of photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination address. Godpeyqydcjfx Adbobi External reference: 8158

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, plate length: 2,800 mm, plate width: 1,300 mm, TECHNICAL DETAILS Godpfxeyq E S Ss Adbobi Max. panel width: 1,300 mm Max. panel length: 2,800 mm EQUIPMENT 180-degree panel tilting system The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6327

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, power: 25 kW (33.99 HP), workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, feed rate X-axis: 18 m/min, Equipment: CE marking, TECHNICAL DETAILS Minimum panel height: 8 mm Maximum panel height: 60 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 12 mm Maximum feed speed: 18 m/min Sequence of work steps: Section 1 Work step: Positioning Motor power: 2.5 kW Automatic control Edge preheater Glue tank Glue preheater Roll magazine Section 2 Work step: Cutting Number of motors: 2 Section 3 Work step: Edge milling Number of motors: 2 Motor power: 0.55 kW NC positioning Section 4 Work step: Corner rounding Number of motors: 2 NC positioning Section 5 Work step: Milling Number of motors: 1 Motor power: 3.5 kW Section 6 Work step: Edge scraping Section 7 Work step: Glue scraping Section 8 Work step: Brushing Number of motors: 2 MACHINE DETAILS Total power: 25 kW EQUIPMENT Panel support guide Spraying unit Control with more than 20 control systems CE marking Gbjdpfx Adeytr Rgjbsi The machine is sold and delivered in its actual and legal condition ('as seen and agreed'), based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6216

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, main saw diameter: 315 mm, tool diameter: 315 mm, Equipment: CE marking, scorer, TECHNICAL DETAILS Main saw blade diameter: 315 mm Maximum tool diameter: 315 mm MACHINE DETAILS Gedoyqyc Eopfx Adbsbi Circular saw blade units: 1 Connected load: 4 kW EQUIPMENT Scoring unit Tilting function CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documents. The buyer is entitled to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8118

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, travel distance X-axis: 6,200 mm, travel distance Y-axis: 1,935 mm, workpiece height (max.): 250 mm, number of axes: 4, number of spindles: 40, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Gbedpjyqzrnefx Adbji Maximum panel thickness: 350 mm Number of vertical drilling spindles: 28 Number of horizontal drilling spindles in X-direction: 4 Number of horizontal drilling spindles in Y-direction: 8 Total number of drilling spindles: 40 Total number of tool change positions: 22 Number of suction traverses: 10 Milling unit Number of axes: 4 Motor power: 10.5 kW Automatic tool changer Edge banding unit Gluing unit Tool magazine Grooving unit Number of positions in tool magazine: 22 MACHINE DETAILS Main spindle power: 10.5 kW Total power: 31 kW EQUIPMENT Vacuum pump Safety net Chip conveyor The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods before collection and shall be responsible for the installation, securing, and use of the machine at the place of destination. External reference: 8011

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, controller model: POWERCONTROL, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,200 mm, feed rate X-axis: 80 m/min, TECHNICAL DETAILS Maximum panel width: 2,200 mm Maximum panel length: 4,300 mm Maximum main saw blade projection: 125 mm Maximum feed speed: 80 m/min Saw Unit Maximum tool diameter: 450 mm Motor power: 13.5 kW Engraving Unit Maximum tool diameter: 180 mm Motor power: 2.2 kW Godpfx Aoyttqzjdbobi MACHINE DETAILS Control system: POWERCONTROL Processing table Number of lift table levels: 4 Number of clamping devices: 10 The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External Reference: 5552

Condition: not inspected (used), functionality: unexamined, total length: 6,600 mm, total height: 2,550 mm, total width: 2,150 mm, power: 48 kW (65.26 HP), TECHNICAL DETAILS Filling area length: 2,900 mm Filling area width: 1,400 mm MACHINE DETAILS Dimensions Overall length: 6,600 mm Overall width: 2,150 mm Godpfjyq Izisx Adbsbi Overall height: 2,550 mm Motor power of cutting shaft: 37 kW Total connected load: 48 kW The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial files of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 8012

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, workpiece length (max.): 2,500 mm, workpiece width (max.): 700 mm, number of spindles: 40, TECHNICAL DETAILS Panel length min.: 170 mm Panel length max.: 2,500 mm Panel width min.: 50 mm Panel width max.: 700 mm Number of injectors: 2 Number of support units: 2 Vertical spindles Speed: 2,800 rpm Number of spindles: 40 Horizontal spindles Gedpfxoyq Irhj Adbebi Speed: 2,780 rpm Number of spindles for horizontal drilling in Y-axis: 6 Number of spindles for horizontal drilling in X-axis: 8 (4 on each side) MACHINE DETAILS Control system: WINDOWS Motor power (vertical drilling): 3 kW Motor power (horizontal drilling): 2.2 kW Note: Tools not included The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 6106

Condition: not inspected (used), functionality: unexamined, power: 55 kW (74.78 HP), Year of construction: 2010, rotational speed (max.): 2,965 rpm, TECHNICAL DETAILS Engine speed: 2,965 rpm Maximum working pressure: 8.5 bar Godpfx Adeyttk Iebobi Air dryer Model: ABT 102 compressed air dryer Max. working pressure: 21 bar MACHINE DETAILS Control model: HMI PLC KAESER Motor power: 55 kW Operating voltage: 400/460 V The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes full responsibility for the installation, securing, and use of the machine at the destination. External reference: 7548