CNC working centre Radius milling aggreg

HOMAG R2 Radius HSK63

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Todet Hagnopfx Adlof Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Condition: good (used), cutting height (max.): 200 mm, chain width: 400 mm, input voltage: 380 V, height adjustment type: electric, rotational speed (max.): 3,400 rpm, power: 37 kW (50.31 HP), MAX cutting depth: 200 mm Tsdpfxstvpfms Adljf Chain width: 400 mm MAX distance between exterior blades: 380 mm Blades diameter (min/max): 250 / 350 mm Adjustable feeding speed (inverter): 5 – 30 mt/min MIN workpieces lenght: 1000 mm Blade holder diameter: 70 mm Spindle shaft speed: 3.400 RPM Main motors power: 2 x 37 kW

Condition: used, different types available Tjdpfodc A Sbox Adlsf

Condition: good (used), Robot Todpfx Aobrhtdodljf Manfacturer: Staeubli Type: RX170

Condition: used, machine/vehicle number: 007601, X axis working area: 4320 mm Y axis working area: 2245 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Tedpfx Adeu N Skfolef Total number of drilling spindles: 16 Total number of tool changer positions: 8

Condition: used, Working width 1350 mm Number of sanding units 2 st. Workpiece thickness max. 160 mm sanding belt measurements 1370 x 2150 mm Tsdpormucxofx Adlsf Feed motor 0,75 PS

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 Tsdpfxedt Rgvj Adlef VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Condition: good (used), Year of construction: 2002, functionality: fully functional, GOMA FC -10 KZ6 finger jointing wood joining line Polish production year of production 2002 DTR with declaration of conformity TECHNICAL PARAMETERS: wood width min / max - 40 / 160 mm thickness of wood min / max - 25 / 80 mm length of a single glued section 6000 mm compression force 7500 kG / 100 atm SAW saw blade diameter 300 mm motor power 6 kW milling machine power 15 kW PRESS hydraulic pump power 4 kW Todpfxst Sfz Is Adlsf working pressure 100 bar

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25.12.01, Fresan FP 100P - C Frame Eccentric Press - 100 Tons (1000kN) TECHNICAL DATA: * Power: 100 tons (1000kN) * Strokes Per minute: 60 (variable) * Ram-Table Distance: 445 mm * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) Tjdpfx Adenxh T Rslsf * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: excellent (used), Year of construction: 2008, Machining center Manufacturer: Weeke Type: BHX 500 Year of manufacture: 2008 machining dimension X: 2.500 mm machining dimension Y: 1.300 mm Machining dimension Z: 4 - 80 mm Number of milling units. 2 Number of drilling units: 2 Tjdpfxoh E Sghe Adljf Drilling spindles vertical: 72 drilling spindles horizontal X: 16 drilling spindles horizontal Y: 4 grooving saw: 90° tiltable speed X-axis: 130 m/min speed Y-axis: 80 m/min speed Z1-axis: 50 m/min speed Z2 axis: 27 m/min Speed: 18.000 rpm Disassembled - directly available