Used Accessories and spare parts for sale
4
GRP0014478
Electric spindle CMS Hiteco HSK F63, 12 kW S1; 24000 rpm at 800Hz
water cooled
completely overhauled spindle
Exchange price!
B9ymv7x973
3
Refurbished spindle ES 362L ,15kw
Price request
Bfufotw0y0
10
Offered are all components of a functional Homag BAZ 20 with interchangeable gluing part. Machine has run until 2021 and has been replaced by a newer one.
- 2 milling units, one of them with electronic interface
- control cabinet and control panel
- gluing unit
B93nm7c3rz
- tool changer
- cable drag
- drive motors
- vacuum pump
- spare spindle
- various spare parts
5
Machine number 20070, 3-axis milling spindle, tool changer 8-fold, table X-axis approx. 3450 mm, Y-axis approx. 950 mm, console with lifting arm, rear stop cams on console, vacuum pump BUSCH MINK MM 1104 AV, control NUM 750
Elfoxh0tk
9
High precision bearings Axial angular contact ball bearings
FAG Aerospace / Super Precision Bearings
4 pieces FAG Aerospace 7602030-TVP
ID 30mm, AD 62mm, width 16mm
6 pieces FAG Aerospace 7603020-TVP
ID 20mm, AD 52mm, width 15mm
Stock from the closure of a furniture factory.
The boxes were labeled with " Maka Z-axis". Therefore they are probably meant for Maka machining centers, but surely they can be used for other purposes as well.
Vtaxjq
The cartons have been partially opened, but the bearin...
5
IMA computer for milling and / or gluing machines of the 310-680 series. Ideal as an exchange of the no longer available IMA computer and hard disk. Included in the delivery is a version IMAWOP 3.0 with software dongle. The computer is tested and stored for about 10 years.
Scope of delivery: Computer (PC)
keyboard
IMAWOP 3.0
Bduwoac9n2
software dongle
on request screen
against extra charge computer control cabinet
keypad
10
I sell the radius copy milling aggregate for edges suitable for CNC working centres with edge banding HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc.
n 12.000 rpm.
B8zszzc7j0
Radius R2mm.
HSK63 holder.
Available immediately.
4
QE2 12/6 18 63F NL
Electric spindle Hiteco HSK F63, 12 kW S1; 18tupm at 600Hz
water cooled
completely overhauled spindle
B7e9kzwafb
Exchange price!
2
Vacuumcups special for flat table machines
Niq93rq
2
GIORDANO COLOMBO ELECTROSPINDLE
SUPPLY VOLTAGE 380V AC
FREQUENCY 300 Hz
POWER 9 HP
Q2di0kt7
POWER 6,7 KW
ABSORPTION 15,6 A
2/4 POLES
RPM 9000/18000
YEAR OF PRODUCTION 1996
OPERATING
3
Spare part for IMA 680 / 480/ 980 ( 410 under reservation )
Edgebanding Unit
For edgebanding on shaped panels with fresh hot melt glue coating onto the
edging material within the machine.
Unit consisting of:
Pressure roller: 100 mm diameter
Pneumatically controlled post pressure roller: 35 mm diameter
Nulm80i
Hot melt glue applicator for the coating of edging material with temperature control
Servo-drive for edge feeding with automatic adaptation to the path control
IR radiator 600 W at the d...
3
Milling spindle scm, Morbidelli ISO 30 with toothing, 7.5KW, 18,000 rpm
Version with 'ZERO SPEED' sensor
**new hybrid ball bearings, balanced, sensors adjusted**
Eimtbriv
Warranty 6 months
Exchange price, only applies to the return of an economically repairable defective part!
6
Milling spindle ES 919 , overhauled at company HSD;
Bzg8zw2isd
4
Milling spindle ISO 30 with teeth, 7.5 KW, 18,000 rpm RTN INVER Vector, Author 510
- new ball bearings
- balanced
Epghfd9p
- cone ISO30 newly ground
- springs clamping set new
- cable set new
warranty 6 months. Exchange price !!!
15
various spare parts for Biesse machines
Byyjtthbpy
4
E- spindle scm prism KT-2 HSK63F 11kW 20,000 rpm
29L0122737D 10L0122737C
Jxmugi
The spindle is completely refurbished.
Exchange price!
15
Sell various used parts for Biesse CNC.
- HSD original tool holder for HSK F63
-milling spindle ES 362L 5 axis , GENERAL OVERHauled
- Inverter Yaskawa
-various Servopack
-Servomotors
-stepping mat switchgear ....etc.
-machine computer, XNC control
-tool holder made of aluminium for ISO 30 / SK30
- Stops for work table (up to approx. year 2001)
-Suction trolley (up to approx. year 2001)
-milling spindle ES 919 SK30
-ring for the admission of angle aggregates (is screwed on the milling spindle)
N...
2
Horizontal drilling head R100 / 110/130 Sx
taken from a scm Record 100 when it was scrapped.
Vut97q
2736217514G
4
E- spindle Hiteco HSK F63, 10/12 kW; 24tupm at 800Hz
cooling by integrated fan
10L0036762A
Oyd0b
Exchange price!
4
milling spindle scm HSK63F 8,5KW E1-NL with fan
ELECTROSPINDLE HSK63F 8,5KW E1 NL GREASE/AIR
Bnd0t0mrwi
**new ball bearings ceramic, balanced, cone ground, springs clamping set new**.
warranty 6 months
Exchange price, only valid for return delivery of an economically repairable defective part!
2
Vecktor flange scm Record 110 reconditioned
Warranty 6 months
Dgmwoeh
exchange price!!!
4
Milling spindle of scm HSK63F 7,5KW 18000 rpm with 600 Hz
The electric spindle was rebuilt completely
-new spindle bearings (ceramic, manufacturer GMN)
Hgpwltf
-new balance
-New spring package
-Seals expression cylinder new
-Set sensors
Warranty 6 months in single-shift operation
Exchange price, applies to only return of economically repairable defect part!
4
QE-1F 8/12 24 63F NC CB
E- Spindle Hiteco HSK F63, 8/9,5 kW; 24tupm at 800Hz
Cooling by integrated fan
completely overhauled spindle
Vth0rm
Exchange price!
2
Vecktor flange scm Record 220 and Routomat reconditioned
Warranty 6 months
Exchange price!!!
Bv828vcc
2
Vecktor flange scm Record 2 reconditioned
Warranty 6 months
exchange price!!!
Bk9orw8h
2
cylinder clamping/releasing E- spindle 11kW X5 prism
Expulsion cylinder
Qnef3ugb
The cylinder was completely refurbished
- Seals new
- Air connections new
- Thrust piece new
Warranty 12 months
Replacement price, applies only if an economically repairable defective part is returned!
3
Cylinder feed stroke Spindle STC,
Gruqqg9
used, tested
taken from a Morbidelli Author 504 STC during its scrapping
4
SIRCO SSS4T075/S frequency inverter
Taken from a scm R9 Cn
used, tested
Ntloj
4
Ball screw Y Tech 100 Super L=1850 D=25 P=20 Used, tested, almost free of play
Hvoqzuqt
2
Cylinder load compensation Z-axle Morbidelli D=50 H=150
Wztm3d7u3
Manufacturer diottalevi, 9111102
D=50, H=150
reconditioned, new gaskets and piston rod
2 pieces in stock
5
Milling spindle COLOMBO HSK63F 7,4KW 24000 rpm at 400 Hz
The electric spindle was rebuilt completely
-new spindle bearings (ceramic, manufacturer GMN / SKF)
-new balance
-new motor winding
-New spring package
-Seals expression cylinder new
-Set sensors
Begr3duodj
Warranty 6 months in single-shift operation
Their defective spindle can be taken in payment!
4
Morbidelli author 600 tool changer servo motor
Bdtgc82k9u
Siboni 30PL082 DT14 worked on
3
Morbidelli author 510 tool changer servo motor
Bdb9newyt2
Siboni 30PL082 DT14 used, tested
6
milling spindle scm, Morbidelli ISO 30 with gearing, 7,5KW, 18.000 upm
Bcp0b8ch7f
Version RTN INVER STC with Vector
**new bearing, balanced, cone ground, springs clamping set new**.
warranty 6 months
Exchange price, only valid for return delivery of an economically repairable defective part!
3
Braking unit z axis from one scm record 120
Spare part number according to the spare parts list 2784750002 H
features reclaimed second hand part, springs, gaskets, brake pad new!
L9vfqmcl
6 months warranty
2
Cylinder load compensation Z-axis scm Record 1
Manufacturer Pneumax, article number according to type plate 2736232510G
L7vjb
The cylinder is reconditioned.
Exchange price!
2
Cylinder group hood control Morbidelli author 600
Article number according to the spare parts catalogue machine: 2731130260 B
Wgs9flq
features reclaimed second-hand parts, seals and Kolbenstangeb new
Delivery in Exchange, exchange price!
6 months warranty
2
Cylinder Vorlegehub spindle STC
Myidj
University U3010214
completely rebuilt new seals, new pistons,
6 months warranty
Exchange price!
4
E-spindle RV110.22 6HP,10A,380V, max 300Hz 18.000upm
clamping system Leuco 25mm
new bearings (Ceramic) and balanced
6 months warranty
Ciy32fe
3
Ballscrew of scm record 120 S, Y axis
Ft0g2bl
D = 32 P = 25 L = 1630
used, tested, nearly backlash-free
2
Drive motor spindle emco MC90 without frequency converter
The engine get new ball bearing and was balanced
380V 2 speeds: 1.6kW 1410 upm / 2kW 2870 upm
0ijf3htr
2
Incremental e Balluff BDG6360-16 S-10-30 W127-1000-65
taken from a Weeke BP15 at their disposal
complete with mounting bracket and connector
Dvhn0gr
2
lower drilling gear cover tech 95 L, 10 spindles
Natrn
used, built from functioning machine.
the used bearings are still installed
2
Basic body gearbox tech 95 L, 10 spindles
Bbgxharerj
used, built from functioning machine.
the used bearings are still installed
2
Ballscrew Z axis scm Routron B
used, tested, backlash-free
Nasjn
1
Stop 25/45 steel compl. for means of rail Morbidelli author
Bbgkjb98b3
features reclaimed used part
1
Stop 25/45 steel compl. for side rail Morbidelli author
all-inclusive shut-off valve
features reclaimed used part
left and right side of the bearing
Bbgkgmflnt
