Feeder

IMA

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Bdodpfxowkba Ts Al Isb Features and technical data: At 5,500 mm in length, the Quadromat is the shortest edge banding machine that enables complete processing of edge materials with an integrated workpiece return system. Not only are the longitudinal edges trimmed within the machine, but the end edges are also copied, thus completing the processing cycle. The finished workpiece is returned to the operator, eliminating the need for manual reworking. - With PLC control system supporting up to 20 processing programs Workpiece dimensions: - Minimum width: 60-80 mm (depending on edge material) - Minimum length: 150 mm - Workpiece thickness: 10 - 50 mm - Edging thickness: 0.4 - 12 mm - Minimum edging length: 400 mm Feed rate: 18 m/min Equipped with: - 2 jointing milling motors - Multi-functional milling unit (flush trimming, chamfer, radius) - Scraper - Cross-cut saw - 2 glue pots (for transparent and white glue) and 1 spare pot Compressed air connection: 7-10 bar Extraction connection: 160 mm Weight: approx. 2,400 kg Availability: short notice Location: Flörsheim

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: Bededt Rgvjpfx Al Isdb VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Condition: used, Year of construction: 1994, Storage location: Nattheim Bdjdjwmm Nrjpfx Al Ieb

Condition: good (used), IMA LED set-up aid used in working condition. about 60 LEDs 15 pin serial port on both sides Dimensions 18 x 56.7 x 312 mm including 10 mm for the connectors Direct purchase in our internet shop on our homepage Bdedpfx Ajbxx Iusl Ieb

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam Bedpfx Asfi Tg Hjl Ijdb No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Year of construction: 2001, condition: good (used), IMA glue part Spare part for e.g. IMA 680 / 480 /980 Edge banding unit for 4-sided gluing and all-round gluing on butt joints with: -Main pressure roller diameter 100 mm and pneum. controlled squeezing roller, diameter 35 mm -Specification of adhesive for the coating of the Edge material, with temperature control and level control -Servo drive for edge transport with auto- automatic adjustment to the web speed -Hot air re-activation unit 7.5 KW, on the adhesive side -IR radiator 600 watts on the decor side the deformation of the material at small radii -pneumatically driven cutting saw -Bumping edge query Bsdpfx Asbxx Iksl Iodb -NC axis Rotation range up to 740 degrees, pneum. Z stroke 125 mm -separate NC-axis in Y (with portal in X) working independently of the main axis Year of construction of the part 2001 comes from machine IMA 680 V No. 2216 Scope of delivery as shown Please check the possibility of installation in your machine. No return possible Unit was used in production for about 2 years and can be described as good Technical information subject to change

Year of construction: 1991, operating hours: 13 h, condition: like new (used), functionality: fully functional, Corazza/IMA MD120 portion packer. Machine for dosing and wrapping mini portions of butter and bouillon cubes in rectangular packs. - Capacity 5400 p/hr up to 7200 p/hr Bdodpfowfn Adsx Al Isb - Current pack size 31x23x11 --> Conversion to other pack size possible - Yom. 1991. - Factory overhaul by IMA 2016. Only 13 running hours since the overhaul. - Paper feed and positioning controlled by photocell - Butter fed by stainless steel funnel with stainless steel auger. - Fully guarded with Lexan doors and windows. (Acc EC regulations.) - Including documentation and EC conformity declaration. - A fully automatic collecting and stacking device in multiple layer configuration can be added. - This machine is basically the similar to the Benhil 8304 As new condition Please contact us for more information, the machine can be seen by appointment.

Condition: excellent (used), Year of construction: 1999, beautiful veneer saw with planing unit Bdjdsq Rb Irspfx Al Isb cutting length 3100 mm with rear fence

Condition: used, machine/vehicle number: 005637, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1300 mm Bedpfsvw Ev Hex Al Iedb Max feed speed: 50 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 12 nr

Condition: used, machine/vehicle number: 006017, Position 1: Vertical Storage Systems IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 2: Angular Beam Panel Saws IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 3: Panel Feeding and Loading IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 4: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 5: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 6: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 7: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 8: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 9: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 10: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 11: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Bdjdpfxjwukzhj Al Ieb Position 12: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110

Condition: good (used), Year of construction: 1962, large band saw with 1250 mm roller diameter Bdjdjfnh T Iopfx Al Ieb with center cutting device 45 kw motor roller width 120 mm with electr. saw blade tensioning the upper wheel has been removed for transport very good condition because little run was overhauled in 1997

Condition: used, machine/vehicle number: 005635, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/II/650/A/R3 Bsdpewuudyjfx Al Iedb Position 2: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 3: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 4: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 5: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 6: Panel Stacking and Offloading IMA + MEINERT-COMBIMA/II/650/A/R3

Condition: used, machine/vehicle number: 005642, undefinedPosition 2: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 undefinedPosition 4: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Bedpfx Aewuciwol Iedb

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 Working width (min/max) mm 236 / 1300 Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 / 50 Without Transmission bar (Master & Slave system) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Milling Unit (vertical Joint Trimmers) 08. 0555 max. 3° (2 x 1 kW) Free space Bedpedh Tfgofx Al Ijdb EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) 04.1570 Band Pressure zone Edge coils supporting unit (reels N°) 6 Rough Trimming unit 08. 0555 (2 x 1 kW) max. 3° Fine Trimming unit 08. 055 (2 x 0,66 kW) 30° + 30 m/min Glue scraping unit 08.517 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x 0,18 kW) Free space

Condition: used, machine/vehicle number: 005639, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Max feed speed: 50 m/min Operating Units Right Side: 12 nr Bedpfovw Evgox Al Isdb Operating Units Left Side: 12 nr