Furnierpresse

Joos HP 120 - 3100 x 1350mm

Condition: ready for operation (used), Technical characteristics pressure 2.2 kg / cm² Blodpfxst N Auts Ad Aor 18 kW diathermic oil boiler timed pressing digital display Power and Motors Voltage: 400 V Pluging: Three-phased Power: 20 Kw Overall dimensions Lenght: 3500 mm Width: 1500 mm Weight: 3200 Kg

Condition: ready for operation (used), Year of construction: 2025, Main Drive Pressing force 1200 kN Bjdowvm Rbepfx Ad Ajlr Additional Equipment Mylar Foil Attached to Upper and Lower Press Plates Electronic Flatness Control (EFC) for Incorrect Loading Protection This ITALPRESSE XL/6 30-13 PM BO veneer press was manufactured in 2025. Consider the opportunity to buy this ITALPRESSE XL/6 30-13 PM BO veneer press. Contact us for more information. Application Types Pressing / Laminating

Condition: new, Year of construction: 2023, OMC PL 105 LC 30/13 Water-based veneering press Working surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Maximum heating temperature of 85 degrees Control system logic contorl Bljdpfx Aeiypzlod Ajr Machine control from touch panel readouts Temperature, pressure force, shelf opening time, loading area calculator, glue process programming Power 21KW CE certificate Production 2023 Machine available on request New machine

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts -Automatic device for moving pieces from the buffer to the loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Bjdpfx Adoixxwme Aelr POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Condition: used, Year of construction: 2009, max. workpiece length 4500 mm profile spindle 1 Stück main drive 20 kW Control Siemens Weinig Conturex 2 C 114 ----- Working width: 40-260 mm Working height: 25-110 mm 2 x PowerGrip clamp tables, 2 x 2280 mm ----- Workpiece length 200 - 4,500 mm Workpieces over 2,700 mm in length are machined using a repositioning cycle. Main spindle 1: ----- Motor with brake 20 kW HSK 63F Electronically adjustable speed 2,000-18,000 rpm Maximum tool length from flat surface HSK 63 F: 290 mm With C-axis Tool magazine: ----- Number of pockets: 30 mm Pitch between pockets: 100 mm Permanently installed multi-spindle drilling head ----- For horizontal and vertical drilling and milling work without tool changes ----- Price ex-site Prices for disassembly and loading onto customer trucks Transport within Germany and abroad as well as reassembly Commissioning and, if required, new profiles are available upon request! Used tools included (drawings available upon request): ----- Bedpswunwyefx Ad Ajlr Wood: IV 68, 78, 88, opening inside and out, with hinged weatherboard Wood-aluminum: IV 68/68, 78/78, 87/68, 97/78 Lift-and-slide doors IV 68 and 78 Front doors IV 68 and 78 Pivot windows Corner connection: counter/dowel Technical specifications according to the manufacturer - no guarantee! Detailed technical description available upon request!

Condition: good (used), sander consisting of: first group - electronic cross belt second group - electronic pad belt third group - electronic pad belt superfinisher machine with inverter on belt and vacuum for small parts line machine Bodpfx Ajt N Tfcjd Ajlr

Condition: excellent (used), Year of construction: 1997, total length: 4,400 mm, working width: 1,400 mm, height adjustment type: electric, input frequency: 50 Hz, input voltage: 400 V, Good day, We present for sale Heesemann LSM 8 wide-belt grinding machine in a system of four grinding units: transverse unit / longitudinal unit with calibration roller / longitudinal unit with reverser / longitudinal unit + dust collection brush. Machine after mechanical overhaul and inspection, checked and set up, ready to work. Year of construction: 1997 Feed speed: 5-25 m/min - infinitely adjustable from the control panel Working height: 880 mm Workpieces machined: 3-80 mm Energy demand: 107 kW - at full load Total weight: 10250 kg Control: control panel with physical buttons and display Controls: and side of abrasive belt change: right Single conveyor belts, perforated, perforated table with channel and vakuum fan - for safe transport of short workpieces. Part pressure: rubberized rollers fi 70 mm. Abrasive belt Q aggregate: 5400 mm x 150 mm Motor power: 13/17 kW - two-speed motor - belt speed: 12 m/s / 24 m/s Belt "sergeant": 4850 mm x 141 mm Longitudinal belts L aggregate: 2620 mm x 1450 mm Motor power: 16.5 kW / 21 kW - two-speed motors - 10 m/s / 20 m/s Pressing: Pressure beams with computer-controlled selective pressure control - CSD® system with infinitely variable pressure adjustment of individual pressure elements for trouble-free multi-row loading. Reading control roller distance: 16 mm. The abrasive belts have a cleaning system - blow-off and dust extraction. Workpiece tolerance compensation to a maximum of 2 mm by maintenance-free pressure electromagnets. Working width, as well as the beginning and end of the grinding of the pressure bar electronically controlled. Cleaning of the abrasive belts by means of blow-off tubes, dust extraction by means of integrated exhaust channels, activation of the blow-offs automatic, upon detection of workpieces in the machine. Bsdpfsu Hlzfex Ad Aslr At the end, a cleaning/deblasting brush fi 150 mm with an exhaust duct for dust removal. Additional blow-off rotors at the exit of the machine with an exhaust channel. Commissioning at the new site and initial training in operation - to be agreed. Price negotiable on request, machine available immediately.

Condition: excellent (used), Year of construction: 2009, BIESSE ROVER C9.65 FT Conf 2 MACHINING CENTER XP6OO control system entirely PC-based - Division into 2 shaping areas and 8 X-blocking zones 2 300m3/h vacuum pumps - Configuration 1 X=6450mm Y= 1860mm C2-A1 composition 12kw electro-spindle, Iso30 air-cooled socket Blsdpfx Adjtt Sqds Aor -360° pivoting operator device - C axis 10-position revolver tool magazine on Z carriage Predisposition for mechanical copier - 5 ISO30 tool holders with spring clamps Automatic lubrication system - Diagnostic video - Oil bath sawing unit for 215mm blade Extra charge for extension of reticular work surface to 2100mm in Y direction

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm # 2809 Weinig Unicontrol 6 ----- Technical Specifications Summary (Please inquire about any additional accessories included) Item 1: Crosscut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for detecting the saw cut CNC-controlled length stop ----- > Length 3,500 mm > Electronic length stop including positioned crosscut saw Item 2: Tenon and slotting spindle ----- > Number of tools: 3 (stroke 2 x 100) mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3000 rpm > Max. tool travel circle: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 360 mm > Motor power: 11 kW Item 3: 1st profiling spindle (straight and counter-rotating) ----- > Position: vertical right > Number of tools: 1 > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool travel circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool travel: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g., glass-parted muntins) Muntin guide consisting of: Muntin support bar from above in the area of ??the profile milling unit vertically on the right and the profiling spindle. Item 5: Profile milling unit, horizontal, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Tool travel radius max. 130 mm > Axial adjustment range: 30 mm, 2 positions > Radial adjustment range: 125 mm, 4 positions, manual Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range: 115 mm, 8 positions via pneumatic turret > Radial adjustment range: 110 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm Bledpfxsxtvgko Ad Aor > Spindle diameter: 40 mm > Tool travel radius Max.: 210 mm > Motor power: 3.0 kW Other features ----- > Electric feed height adjustment including mechanical digital display and manual feed bar clamp > Rebating device for tear-free rebating > Double parts package > Return conveyor for one-person operation: swivel belt > Screen control > Sloped window device > Electronic angle display for sloped windows > Industrial PC, with Windows PC control/NEXUS Extraction nozzle diameter: ----- Crosscut saw 80 mm Slotting spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Top grooving device 80 mm Fitting spindle 120 mm ----- Pr...

Condition: used, Leadermac 523 U Bsdpfxoqwg H Ds Ad Aelr max. planing width 23 cm - max. planing height 13 cm - bottom 5.5 kW, right and left from one motor 7.5 kW, top 7.5 kW universal 7.5 kW - 2 traction rollers in the table, 7 from above - Spindles can be adjusted vertically and horizontally - Infinitely variable adjustment of the feed speed - Central lubrication, pump with material slip fluid