CIRCULAR SAW

KALTENBACH HDM 1300

Condition: as good as new (ex-display), Year of construction: 2012, machine/vehicle number: 925624, Kuka unused stock item KUKA VKR210 R2700 Year of construction : 03/2012 load capacity 210 kg reach 2700mm weight 1412 kg Serial number :: 925625 With connection cable: X21/X31 (00-108-948) 25m and X20/X30 (00-104-744) 25m Control cabinet KRC2 ED05 Serial number: 93863 Weight: 203Kg Lajdpfx Ahjrfch Uj Usk Year of manufacture: 12/2012 Teach panel 00-107-264 VKRC2 used, fully functional / serial number: 0000562 Robot data: Repeatability: ± 0.06 mm Axis 1: ± 185º Axis 2: -140 ° / -5 ° Axis 3: -120 ° / 155 ° Axis 4: ± 350 ° Axis 5: ± 122.5 ° Axis 6: ± 350 ° Movement speed of the robot in º / s Axis 1: 105 ° / s Axis 2: 107 ° / s Axis 3: 114 ° / s Axis 4: 136 ° / s Axis 5: 129 ° / s Axis 6: 206 ° / s

Condition: excellent (used), Year of construction: 2007, Lot of 36 pillar cranes Laodpfx Ahel R Izbo Usk Lifting capacity 500 kg to 2000 Kg Price 89.000 Euro

Condition: good (used), Opportunity: 2x Pfeiffer Classic 590 available! Price: EUR 99.500/piece. Configuration Coater 1: 2x Pfeiffer TPH 2301 (2300ls) completely overhauled Pfeiffer DCU 600 2x VAT Throttle Valve 64048-pe48-ads2/0001 1x Pfeiffer PKR251 fullrange sensor Pfeiffer TPR280 for prevacuum Pfeiffer DUO 120 prepump (120m3/h) Vacuumchamber: for substrate size round 840mm incl shielding and spare shielding set 2x viewport Several feedthroughs Rotating feedthrough incl thermocouple Infrared heater Watermanifold plus valves Vacuumvalves for venting-pumpdown etc Notes: Currently used for Resistance Evaporation (no boats available) Current PLC and E-cabinet is removed due to IP. However: if required our company Orange Thin Films can do a complete refurbishment with Labview automation and new processes (such as Eeam-Sputtering-Evaporation etc) Configuration Coater 2: Laodpfshwv Tfsx Ah Uok 2x Pfeiffer TPH 2201 s p c (horizontal turbo 2200ls) completely overhauled Pfeiffer DCU 600 2x VAT Throttle Valve 64048-pe48-ads2/0001 1x Pfeiffer PKR251 fullrange sensor Pfeiffer TPR280 for prevacuum Pfeiffer DUO 120 prepump (120m3/h) Vacuumchamber: for substrate size round 840mm incl shielding and spare shielding set 2x viewport Several feedthroughs Rotating feedthrough incl thermocouple Infrared heater Watermanifold plus valves Vacuumvalves for venting-pumpdown etc Notes: Current used for Resistance Evaporation (no boats available) Current PLC and E-cabinet is removed due to IP. However: if required our company Orange Thin Films can do a complete refurbishment with Labview automation and new processes (such as Eeam-Sputtering-Evaporation etc)

Condition: new, NEW No.1 available for immediate delivery CE Warranty The MACC SPECIAL 335 MS is a semi-automatic band saw for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting group. The belt drive is equipped with a two-speed motor and a special reducer complete with bronze gear with hardened and ground worm screw. The flywheels are suitably sized and the belt guides are sturdy and made with watertight bearings and adjustable carbide plates. By means of the electromechanical microswitch control it is possible to tension the band with the rotation of the blade. Equipped with an accident-prevention safety device on the flywheel cover and on the blade, the machine is completed by a rotating table for resting the material and a vice with a rapid approach device. Operation. The machine: 1. closes the vice and activates the band motor 2. makes the arc descend for cutting 3. the arc returns to the starting position 4. stops the band motor 5. opens the vice Manual cutting possibility Cutting speed (m/min) 38-77 Cutting thickness (mm) 1,2 Cutting range From 45 sx 60 dx Stop for cuts of the same size Adjustable Electric pump for cooling the band 0,06 kW Cutting capacity at 0°. Lasdpfxjg S Ui Ae Ah Ujk

Year of construction: 2024, condition: new, The LITech jaw crushers are ideal for pre-crushing extremely hard, medium-hard, hard-tough and brittle materials such as rubble, bentonite, soil, precious metals, ores, ferroalloys, glass, kaolin, catalysts, ceramics, clinker, coal, coke, minerals, non-ferrous materials -Metal, Slag and many, many more!! Ledpoga Nfcofx Ah Uoak

Condition: new, Year of construction: 2023, Highly efficient series production Clamp – enter the cutting dimension – start. Automatic saws with loading are a standard of rational series processing of bar and bundle material. Cutting area max. up to 290 x 320 mm. Furnishing Automatic hydraulic sawing machine with NC control for cutting from 0° to 60° right, complying with all CE safety standards The device has 9 programs, each of which composed of 99 individual steps, with a total number of approx. 890 cutting positions, with corresponding piece counter Function: material feed closing fixed vice Blade rotation, distribution of emulsifiable liquid, temple lowering until the end of the cut and return of the feed carriage until specified amount bail return and stop the blade rotation by cooling liquid distribution cycle repetition Hydraulic feed cut by cut with no length limit Numerical control of quantity and length of cut Hydraulic control center with cutting pressure adjustment The saw blade is tensioned electro-mechanically by means of Microswitch monitored. Device with brush for belt cleaning Bimetallic strip 3200 x 27 x 0.9 mm Section thickness 1.2 mm Material feed stroke 600 mm Motor hydraulic center 0.75 kW Electric pump 0.09 kW to cool the belt It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us. Lajdpfx Ajfww Sqeh Ujk

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm Lodjhzbipepfx Ah Ujak - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: new, Year of construction: 2025, NOTICE: POSSIBILITY OF CALCULATING ANY CRANE CONFIGURATION Thank you for your interest in our offer. WNM Sp. z o.o. offers a wide range of cranes, including: gantry cranes, semi-gantry cranes, cantilever cranes, column-mounted cranes, suspended overhead cranes, and top-running overhead cranes. We invite you to submit inquiries for quotations. Our pricing is based on customer-provided data such as crane type, lifting capacity, lifting height, dimensions, and travel rail length. This advertisement refers to a gantry crane/hoist with a lifting capacity of 5 TONS. Lasdpev Ni Rxefx Ah Ujk All crane components are made from high-quality materials, ensuring durability and resistance to damage even in harsh environments. TECHNICAL SPECIFICATIONS: GANTRY CRANE WITH HOIST – 5 TON CAPACITY Span Length: 6 m Lifting Height: 3.55 m Lifting Mechanism: 5-ton electric chain hoist Lifting Speed: 2.7 m/min Cross Travel Speed: 11 m/min Crane Travel Speed: 10 m/min Work Class: A3 Power Supply: 380V/50Hz/3-Phase Control Mode: Pendant control + remote control We issue VAT invoices for all machines. For any inquiries, please feel free to contact us.

Condition: new, The ACE Laser Compact 1313 2.0 R, a state-of-the-art Laser Cutting Machine from KNUTH, is designed to set new standards in price and performance within the Laser Cutting Machines product group. This compact laser cutter is optimized for highly efficient processes, making it ideal for both large production centers and smaller workshops due to its minimal footprint. Built on a robust steel weldment frame, the machine features a lightweight gantry constructed from aluminum die-cast, ensuring both high rigidity and superb dynamics. The linear guides on all axes provide exceptional precision and require minimal maintenance, supported by preloaded ball drives that enhance positioning accuracy. You can easily monitor the cutting process through a safety glass window, while its intuitive PC-based control allows for straightforward operation with a technology database that simplifies programming. The ACE Laser Compact 1313 2.0 R ensures top performance in laser cutting with its powerful Raycus laser source, automatic focus positioning, and efficient nesting software that minimizes material waste. To find out more about this impressive Laser Cutting Machine or to request a quote, please visit our website. Lodjnh Ng Djpfx Ah Ujak

Condition: reconditioned (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, type of input current: AC, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, Equipment: documentation/manual, lighting, type plate available, 3D coordinate measuring machine Mahr MS2VT used multi-sensor CMM with motor zoom and active vibration damping Factory overhauled premium multisensor measuring center with guarantee and warranty rebuilt 2022. Incl. latest SW update, 18 months free SW update service, free lifetime SW hotline and user support. Delivery with factory service or forwarding agency, worldwide. Online, optionally on-site demos with customer parts, application technology advice from accredited Profitech measurement laboratories during project planning. Complete service: – Delivery, construction, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual education and training programs can also be booked as online courses. Rent-hire-purchase or financing possible directly via Profitech and without a financial institution. Measuring device individually configurable to customer needs • Measuring range single sensor: 200x200x200mm • Dimensions: 900x750x950mm Bcym337udm • Weight: about 170kg • Accuracy: E2 = 2.4 + L/150 [?m] • Refurbished 2024 • incl. USB camera with fixed focal length • incl. LED ring light Ljdpedz Er Rjfx Ah Ujak • including calibration standard • incl. 2-monitor operation • incl. new Windows 10 • incl. Opticheck3D 5.0 ​​evaluation software (12 months free SW update) Manufacturer's icon image (sister device)