Säge-Bohranlage

Kaltenbach KDXS 1215 - HDM 1432

Condition: used, Saw blade Ø: 1310 mm Iijlhjbzg R Tscdw Nsb round 440 mm square 400 mm flat 800 x 290 mm 60° 590/750 x 300 mm 45° 460/600 x 300 mm 30° 420 x 270 mm 20° 260 x 260 mm Dimensions 2870+380 x 1320 x 2700 mm (LxBxH) weight circa 7500 kg

Year of construction: 2002, Condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 Iielhcdehzbipew Nob - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, saw blade diameter 370 mm cutting diameter 115 mm capacity 90 degrees: flat 300 x 35 mm cutting speed 11 / 15 / 22 m/min total power requirement 1,4 kW weight of the machine ca. 850 kg dimensions of the machine ca. 1100 x 1100 x 1600 mm Iijlhewkvt Iecdw Nob -The powerful, 2-stage gear was specially designed for cuts in solid material designed -The user has a total of 4 blade speeds for optimal adjustment the material available -The large bearing rotary table with internal table clamping and Precision stops at 0/45/60° ensure quick adjustability miter cuts -The vice with quick clamping (optional is a pneumatic one Vise = MA, available) is with screwed vise jaws Mistake. With their ribbing, these ensure optimal hold of the workpiece -Underframe with lockable door, chip drawer and removable Coolant pan with electric coolant pump -Chip removal brush

Condition: used, Year of construction: 1975, saw blade diameter 400 mm Islhjvp Sdzocdw Njib cutting diameter 130 mm stroke 135 mm saw blade diameter 370/400 mm feed speeds 0-500 mm/min cutting speed 1400/2800 U/min range of angles 0-180 ° capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 280 x 70 mm capacity 45 degrees: square 105 mm Wheel width 185 mm Required air-pressure 8 bar total power requirement 3,7/4,5 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1,3 x 1,1 x 1,7 m Robust semi-automatic light metal profile sawing machine with cut from below and pneum. workpiece clamping from above, saw bridge adjustable from front to back. The year of construction is estimated! Any additional required safety shielding must be installed by the purchaser. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1981, machine/vehicle number: 55848, Lg. No. 24029 Technical Specifications: - Saw blade diameter up to 400 mm - Cutting range at 90°: round 130 mm Iielhewk Icbscdw Nob - square 120 mm - rectangular 300 x 40 mm - or 240 x 85 mm - at 45°: round 130 mm - square 110 mm - rectangular 245 x 40 mm - Miter adjustable left and right 0 - 90° each - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Saw blade feed speed continuously adjustable hydraulically - Coolant system - Automatic material refill system - Space requirement approx. W 2400 x H 1850 x D 1100 mm - Weight approx. 1250 kg

Condition: good (used), Year of construction: 1982, Functionality: fully functional, Machine type: Fully automatic metal circular saw Manufacturer: KALTENBACH Model: KKS 400 NA 600 Year of manufacture: 1982 Machine no.: 100936 Condition: Good Type of offer: Used machine Technical specifications: Cutting range: Ø 130 mm flat 315 x 40 mm Drive type: electric/hydraulic Drive: 1.7 / 2.6 kW Note: Fully automatic metal circular saw, also suitable for conventional or semi-automatic use. Roller conveyor with stop, Feed with vice, 3 spare saw blades, Coolant system, Various accessories, Iielhcdjwhnqtjw Nsb Operating manual, 2 new clamping blocks Weight: 1,250 kg The machine is in good condition and ready for immediate use. We are happy to inspect and demonstrate it for you. We would be delighted if you find our offer of interest. Errors, changes, and prior sale reserved.

Condition: excellent (used), Year of construction: 2002, saw blade diameter: 400 mm, Semi-automatic cold circular sawing machine Manufacturer Kaltenbach Type. KKS 400E Year of manufacture 2002 Technical data: Iijlhcdowhm Epsw Nsb Make: Kaltenbach Type: KKS 400 E Year of manufacture: 2002 Saw blade Ø: 400 mm Gearbox with speeds of 14/28 m/min -Cutting range at 90 degrees flat 120×120 mm -Cutting range at 45 degrees flat 305×40 mm -Cutting range for round material 130 mm -Cutting speed: 14/28 m/min Total power requirement: 3.5 kW Machine dimensions L 2.80 x W 1.1 x H 2.0 m (including stop) Weight 1250 kg + roller conveyors Equipment - Hydraulic retraction arms left + right - Minimal lubrication - Feed - roller conveyor 2 x 2000 mm - CNC stop L40, L = 2,300 mm All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: excellent (used), Year of construction: 2010, operating hours: 3,112 h, Functionality: fully functional, machine/vehicle number: 305973, saw blade diameter: 400 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 400 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,200 m/min, rotational speed (max.): 3,200 rpm, cutting length (max.): 9,999 mm, outer dimension length: 2,340 mm, outer dimension width: 1,300 mm, saw drive: 4,000 W, Equipment: rotational speed infinitely variable, Kaltenbach KKS 400 NA – Automatic circular saw for precise metalworking (built in 2010) For sale is a Kaltenbach KKS 400 NA, a fully automatic circular saw for steel, stainless steel, and non-ferrous metals. The machine is in very good condition and has been used only rarely since its purchase. ✅ Condition & History: -Technically and visually in very good condition -Service receipts for the last maintenance are available -Hardly any operating hours since the last service -Ready for immediate use 🔧 Technical Highlights: -Saw blade diameter: 400 mm -Cutting range at 90° (round): up to Ø 130 mm -Miter cuts: automatic from 0° to 180° -Feed: NC-controlled feed gripper, max. cutting length 9,999 mm -Speed: up to 3,200 rpm -Feed speed (Z): up to 1,000 mm/min (rapid traverse up to 3,300 mm/min) -External dimensions: approx. 2,340 × 1,300 × 1,805 mm Iislswhwd Aohcdw Njb -Weight: approx. 1,700 kg NC control With remote diagnostics function → For easy programming, higher repeatability, and reduced setup times. Automatic material feed (1,000 mm stroke, max. 9,999 mm cutting length) → Ideal for serial cutting and long workpieces, significantly more efficient than manual feeds. Motorized miter adjustment (0°–180°) → Fast, precise bevel cuts without manual adjustment – tiltable to both sides. Continuously adjustable cutting speed (up to 43 m/min) → Optimal adaptation to the material and workpiece – better than the fixed speeds of older machines. Powerful 4.0 kW motor → Higher cutting performance even with thick-walled materials. Hydraulic clamping technology & economical lubrication → For clean cuts, less rework, and long tool life.

Condition: not inspected (used), Year of construction: 2000, Functionality: unexamined, Straight-cut band saw, cutting capacity up to 450 mm wide Islhcdwowhmpbo Neib The machine was part-exchanged and reportedly worked until the customer's last use. "This is a used machine whose functionality has not been tested. The sale is made without any warranty."

Condition: good (used), Year of construction: 1997, Functionality: fully functional, For sale is a Kaltenbach cold circular saw. Gearbox free of play! Type: KKS 450 E Saw blade Ø: 450 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Fast forward/reverse: 1,550 mm/min Max. working range: 150 mm Working range square material: 140 mm Working range flat material: 330x40 mm Working range round material: 140 mm Working range min.: 10 x 10 mm 150 Mitre range: 0° - 90° - 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 1000 kg Islhcdwjwg Ttwj Noib Inspection / collection in 89558 Boehmenkirch Shipping possible on request Forklift available for loading.

Condition: used, diameter of saw band: 350cutting area - round: 350cutting area rectangle: 350 x 350total power requirements: 2,2 Used cold circular saw Kaltenbach SKL 350 Cutting Capacity at 90°: Round: Up to 135 mm Square: Up to 120 mm Flat: Up to 70 x 280 mm Cutting Capacity at 45°: Square: Up to 105 mm Flat: Up to 55 x 210 mm Iislhcdwjv Ncpbo Nob Saw Blade Speeds: 2,250 and 4,500 rpm Motor Power: 5/6 hp (approx. 3.7/4.5 kW) Weight: Approx. 650 kg Dimensions (L x W x H): Approx. 1,200 x 1,200 x 1,500 mm

Condition: good (used), Cutting range: Ø 55 mm, blade Ø: 200 mm Iislhjhtzcaocdw Nsb Drive type: el./mech. drive: 0,75 kW, 400 V Remark: portable weight: 50 kg

Condition: excellent (used), Year of construction: 1993, saw blade diameter: 400 mm, Automatic cold circular sawing machine Manufactured by Kaltenbach Type. KKS 400 EC NA Year of manufacture: 1993 Technical specifications Make: Kaltenbach Type: KKS 400 NA EC Year of manufacture: 1993 Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid forward/reverse speed: 1,550 mm/min Working area for square material: 120 x 120 mm Working area for flat material: 305 x 20 mm Working area for round material: 130 mm Minimum working area: 10 x 10 mm Miter range: 0° - 90° - 0° Dimensions (L x W x H): 3,500 x 1200 x 1800mm Weight: approx. 300 kg Ijlhowhmz Recdw Nsib Features - 400mm saw blade - Infeed and outfeed roller conveyor including manual stop - Long-stroke vertical vice - 135mm stroke - Rotating saw table for straight and bevel cuts, 180° swivel range - Automatic material feed - Workpiece stop with stable contact surfaces on both sides of the saw blade - Hydraulic saw blade feed, continuously adjustable according to the table - Work area lighting - Removable chip drawer with roller bearings - Machine protective cover - Machine CE compliant All information is provided without guarantee. A demonstration is available at any time in our showroom.

Condition: good (used), Year of construction: 1997, Semi automatic Aluminium circular saw, blade Ø 350 mm, capacity Ø ca. 125 mm, motor 3,7 / 4,5 kw 2-speed 1420/2880 rpm, vertical clamp, stops 30°, 45°, 60° 90° double side, blade; dimension 100x115x155 cm, weight ca. 600 kgs Iislhcstqfvyodw Nsb

Condition: not inspected (used), Year of construction: 2001, Functionality: unexamined, saw blade diameter: 400 mm, cutting capacity: 125 mm, cutting range round at 90°: 120 mm, RKS 450 NA automatic straight-cut saw, HSS saw blades Cutting area 125 x 125 mm Suitable for pipes and solid material Automatic material feed, hydraulic clamping, freestanding hydraulic unit Ijlhewgitmscdw Njib This machine is a trade-in and has not been tested. This is a used machine whose functionality has not been tested. The sale is subject to exclusion of any warranty.

Condition: refurbished (used), Year of construction: 2001, A Kaltenbach cold circular saw is for sale. The machine has been completely disassembled and rebuilt. During the overhaul, the gearbox, motor, and hydraulics were overhauled. The table bearings were re-mounted. Gearbox is backlash-free! Type: KKS 450 E Saw blade diameter: 450 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid forward/reverse speed: 1,550 mm/min Maximum working area: 150 mm Working area for square material: 140 mm Working area for flat material: 305 x 20 mm Working area for round material: 140 mm Minimum working area: 10 x 10 mm Miter range: 0° - 90° - 0° Dimensions (L x W x H): 1,080 x 900 x 2,060 mm Weight: 1,000 kg Viewing/pickup in 89558 Boehmenkirch Iolewg Ttqshcdw Noib Shipping available upon request Forklift available for loading.

Condition: used, Year of construction: 2008, machine/vehicle number: 81266- V 80381, Lg.no. 24394 Hydr. rotary and tilting welding table - Four-axis welding manipulator Iislhcougtiusdw Nob Technical data: - max. load capacity 15000 kg - Face plate dimensions 2990 x 2990 mm - min. Table height in horizontal position approx. 1070 mm - Face plate can be rotated + swiveled or tilted - Faceplate can be moved horizontally + vertically, travel 1250 mm - Rotation electr. infinitely variable - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V - Connected load 33.0 kW - Manual remote control for speed regulation - E. foot switch - Space requirement approx. W 2990 x H 1070 x D 5500 mm - Weight approx. 12500 kg

Condition: excellent (used), Year of construction: 1985, Machine number 52565, Ijlhcof Ar T Rsdw Nsib Cutting range: max. Ø 130 mm, Leaf Ø: 400 mm, Type of drive: el./mech., Drive: 3.0 kW / 400 V, Comment: with mobile base, Weight: 200 kg

Condition: excellent (used), Year of construction: 2000, saw band length: 5,620 mm, Fully Automatic Band Saw Manufactured by Kaltenbach, Type KB 305 NA Year of Manufacture: 2000 Technical Specifications Manufactured by Kaltenbach Type: KB 305 NA Year of Manufacture: 2000 Voltage: 380 V, 50 Hz Saw blade: 5,620 x 34 x 1.1 mm Saw motor: 5.5 kW Total: 7.2 kW Dimensions (L x W x H): 3.4 x 2.10 (plus roller conveyor) x 1.80 m Weight (without accessories): approx. 3.1 t Working area: Round material: max. 305 mm Square material: max. 305 x 380 mm Belt speed: continuously variable 16 – 96 m/min. Equipment • Multiple saw blades as shown in photos • NC control system • 2.1 m infeed roller conveyor Iolhcdwewhmvuo Njib • Automatic material replenishment via gripper • Chip conveyor • Hydraulic saw blade feed • Documentation All information is provided without guarantee. A demonstration is available at any time in our showroom.

Condition: refurbished (used), saw blade diameter: 360 mm, cutting range round at 90°: 100 mm, section length (min.): 300 mm, Fully automatic carbide circular saw machine type KMR 100 AP Refurbished to mint condition - available ex stock Working range: Round material 20 - 100 mm Square material 20 - 80 mm Iielhcdwjh Uqpvs Neb DRIVE PERFORMANCE Frequency-controlled saw motor 11.0 kW cuting speeds 20 - 150 m/min incl. Infeed magazine and sorting for trim cuts/rest pieces and good parts Suitable for cut off length up to 300 mm Cutting time for Ø 100 mm solid material 1.0037 approx. 7 seconds !!

Condition: good (used), Year of construction: 1984, machine/vehicle number: 102335, Offer 23172 Technical data: Iielhermkl Ajcdw Njb - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° round 130 mm - square 120 mm - flat up to 260 x 60 mm - Mitre adjustment left + right 0 - 90 ° - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - Pneum. Material vice with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg - Outfeed roller conveyor 3000 mm - Infeed roller conveyor 3000 mm

Year of construction: 1992, Condition: good (used), machine/vehicle number: 113994, Offer 22543 Technical data: - Saw blade dimension 350 x 3,2 x 40 mm - Saw blade speed 3200 rpm - Cutting range at 90° 115 mm - 115 x 120 mm - 200 x 80 mm - Miter adjustable left + right - Drive 400 V / 2,0 kW - Space requirement approx. W 700 x H 1500 x D 900 mm Iiolhoiv Sc Nocdw Njb - weight machine approx. 80 kg - with: - saw blade - vice - stop rail 3000 mm

Condition: good (used), Year of construction: 1990, machine/vehicle number: 110693, Offer 20507 Technical data: - Saw blade dimensions 350 x 3.2 x 40 mm - Saw blade speed 3200 rpm - Cutting range at 90° 115 mm - 115 x 120 mm - 200 x 80 mm - Miter adjustable left + right - Drive 400 V / 2.0 kW - Pneumatic connection 6 bar Iijlhorkmkcecdw Nob - Space requirement approx. W 700 x H 1500 x D 900 mm - Machine weight approx. 80 kg - with: - Saw blade - clamping vice - Micro-spray lubricant device - Stop rail 3000 mm

Condition: good (used), Year of construction: 1980, machine/vehicle number: 40435, Offer 24504 Iiolhjvqa Nbscdw Nsb Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° round 130 mm - square 120 mm - rectangle 300 x 40 mm - or 240 x 85 mm - at 45° round 130 mm - square 110 mm - rectangle 245 x 40 mm - Miter adjustable left + right 0 - 90 ° each - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydraulic. continuously adjustable - Hydraulic vertical metal clamping - 2 horizontal clamps manual - Coolant system - Removal roller conveyor with dimension stop approx. 2000 mm - Space requirement approx. W 800 x H 1850 x D 1100 mm - Weight approx. 850 kg

Year of construction: 1986, Condition: good (used), machine/vehicle number: 106157, Offer 21035 Technical data: - Saw blade diameter up to 400 mm Iijlhcog A Rgfsdw Nob - Cutting range with saw blade diameter 400 mm - at 90° round 130 mm - square 120 mm - flat up to 260 x 60 mm - mitre adjustment left + right 0 - 90 ° - cutting speed 1750 / 3500 m/min - feed speed of the saw blade 0 - 3 m/min - rapid return 3000 mm/min - Saw drive 400 V / 3,7 / 4,4 kW - 2 pieces pneum. Material clamping vices with adjustable clamping pressure - space requirement approx. W 1200 x H 1900 x D 1200 mm - weight approx. 600 kg