Portal milling machine KAO MING KMC 4000
KAO MING KMC-4000SV-H

Name: KAO MING KMC-4000SV-H
Brand: KAO MING
Availability: InStock

Year of construction

2008

Condition

Used

Location

Babberich

Portal milling machine KAO MING KMC 4000 KAO MING KMC-4000SV-H

Show map

Machine data

Machine type:: Portal milling machine KAO MING KMC 4000

Manufacturer:: KAO MING

Model:: KMC-4000SV-H

Year of construction:: 2008

Condition:: good (used)

Price & Location

Location:: Transito 21, 6909 DA Babberich, Nederland

Call

Technical details

Travel distance X-axis:: 4,230 mm

Travel distance Y-axis:: 1,950 mm

Travel distance Z-axis:: 750 mm

Table length:: 4,000 mm

Table width:: 1,250 mm

Table load:: 11,000 kg

Details about the offer

Listing ID:: A20079570

Reference number:: 9255

Update:: 30.09.2025

Description

Portal milling machine KAO MING - KMC 4000 SV-H
Double guideway two box way construction
Head changer for Multi-Face machining off larger compontents
ATC tool changer for Horizontal and vertical milling head swivabel
Distance table spindle nose 213 - 1093 mm
Distance table spindle center 130 -.mm
Indexing Horizontal head 5 Degrees x 72 positions
HeidenHain iTNC530 with HR410 handwheel
Spindle torq 1018 Nm ISO50
Universal Huron type milling head

X - Travel: 4230mm
Y - Travel: 1950mm
Z - Travel: 750mm
Distance between column:1500mm
Table Length: 4000mm
Table Width: 1250mm
Table load: 11000
Feed rate X-Axis: 12000mm/min.
Feed rate Y-Axis: 15000mm/min.
Feed rate Z-Axis: 12000mm/min.
Spindle Taper: 50ISO/Bt/Mk
Power on spindle: 26kW
Speeds / ranges: 4400Rpm
ATC / revolver: 30
Chip conveyor: Yes
Coolantsystem: Yes
Length: 10100mm
Width: 4500mm
Fodpfx Aasxf E Twj Espd
Height: 4250mm
Weight: 30000kg
Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Seller

Registered since: 2008

288 listings online

Call

Send inquiry

Telephone & Fax

+31 316 4... show

+31 316 2... show

Fax:

These listings may also fit your interest.

Listing

Planer-type milling machine - double column Kao Ming KMC-4000 SV-H

Mindelheim

1,258 km

Planer-type milling machine - double column
Kao MingKMC-4000 SV-H

Call

Condition: used, Year of construction: 2009, Year of manufacture: 08/2009 Commissioning: 03/2010 Control: Heidenhain iTNC 530 Technical Data: Tool holder: SK 50 Tool changer: 30 stations Spindle speed vertical, stepless: 4400 rpm Spindle speed horizontal, stepless: 3500 rpm Cutting capacity: 440 cm³/min Positioning accuracy: +/- 0.005/300 mm Repeatability of the automatic swivel head: +/- 3' Machine table (LxW): 4000 x 2000 mm Travel paths X/Y/Z: 4230 x 2150 x 775 mm Max. workpiece weight: 11,000 kg Rapid traverse X/Y/Z: 12 / 15 / 12 m/min Motor power: 22 kW Dimensions (LxWxH): 10,130 x 4,510 x 4,250 mm Machine weight: 27,000 kg Scope of delivery: Fsdpfsya U Uuox Aa Eopd - Chip conveyor - Tool cabinet - Approx. 80 tool holders including tools

See details

Listing

Machining Center - Universal DECKEL DMU 70 eVolution

Germany

1,088 km

Machining Center - Universal
DECKELDMU 70 eVolution

Call

Condition: used, Year of construction: 2004, Technical details: x-travel: 750 mm y-travel: 600 mm z-travel: 520 mm table surface area: D 700 x 500 mm turning speeds: 42.000 1/min tool taper: HSK E50 control: HEIDENHAIN iTNC 530 tool change unit: 60 pos. rapid traverse: 50 m/min table load capacity - central/maximum: 350 kg Fodpfx Aowzx Nmsa Eepd total power requirement: 50 kVA weight of the machine ca.: 9 t dimensions of the machine ca.: 3,2 x 2,65 x 2,8 m 5-axis simultaneously HSC-machining center, NC-round-swivelling table B-axis 180°, C-axis 360°, chip conveyor, el. handwheel, laser, prepared for 3D touchprobe HEIDENHAIN TS 641 (without touchprobe), mode 4, oilmist suction, spindle chiller, no internal coolant supply, approx. 141.300 hours "machine on", approx. 64.500 hours "spindle on" in total machine in good condition (test report available) *

See details

Listing

Portalmillingmachine Kao Ming X: 4000mm Kao Ming KMC-4000SVH

Lemmer

657 km

Portalmillingmachine Kao Ming X: 4000mm
Kao MingKMC-4000SVH

Call

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 4,230 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 850 mm, feed length X-axis: 4,230 mm, feed length Y-axis: 2,100 mm, feed length Z-axis: 850 mm, total length: 9,000 mm, table length: 4,000 mm, table width: 1,650 mm, total width: 3,500 mm, spindle speed (max.): 6,000 rpm, total height: 3,500 mm, distance between stands: 2,300 mm, rotational speed (max.): 6,000 rpm, overall weight: 30,000 kg, Equipment: rotational speed infinitely variable, X-axis: 4.230 mm Y-axis: 2.100 mm Z-axis: 850 mm CNC Controller: Heidenhain iTNC 530 Spindle nose: ISO 50 Spindle speed: 6.000 Rpm Toolchanger: 30 pockets Table size: 4.000 x 1.650 mm Distance between columns: 2.300 mm Featured with: Fedpfx Aaoyac T Es Ejpd - Vertical milling head attachement - Touch probe - Cooling throught spindle - Double chip conveyor - Cooling unit - Machine manuals Country of origin: Taiwan Machine LxWxH: 9000 x 3500 x 4000 mm +/- Machine weight: 30.000 kg

See details

Listing

Honing Machine - Internal - Vertical GEHRING 1 Z 250 - 131

Metzingen

1,155 km

Honing Machine - Internal - Vertical
GEHRING1 Z 250 - 131

Call

Condition: used, Year of construction: 1965, honing diameter 80 mm stroke 280 mm throat 300 mm total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. Fodpfjt Hwupsx Aa Ejpd * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). * Honing oil unit. * Various splash shields, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of honing machines available. Please let us know what you need.

See details

Listing

Maulbronn

1,093 km

Bar machining center
elumatecSBZ 150

Call

Year of construction: 2001, condition: used, Pictures to follow - machine is being overhauled Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - Swivel angle A-axis: 0-90° freely programmable - Swivel angle C-axis: 0-355° freely programmable - Max. Machining length without end face machining: 7300mm - Max. Machining length with end face machining: 6980mm - Tool changer with 10 places and a saw blade holder - 9 material clamps Fpsdpet Ea Tfsfx Aa Eod - SK30 tool holder - 2-layer machining

See details

Listing

Werkendam

678 km

250 ton
Cranestock2x125 ton

Call

Listing

Camshaft Grinding Machine JUNKER JUCAM 6XS /12

Nürnberg

1,182 km

Camshaft Grinding Machine
JUNKERJUCAM 6XS /12

Call

Condition: used, Year of construction: 2014, workpiece length 100 mm swing diameter 80 mm number of spindles 2 Control FANUC 31i-B5 workpiece weight 2,00 kg centre height 170 mm grinding wheel diameter 100 mm grinding wheel hole diameter 32 grinding wheel width max. 20 peripheral speed max. 125 m/sec passage of steadyrest 45 - 60 mm total power requirement 75,00 kW Fpsdpfxsvx Uvfj Aa Ejd weight of the machine ca. 25,00 t dimensions of the machine ca. 5,00 x 3,50 x H3,50 m Cam grinding machine for Cam-Pieces with FANUC 31i-B5 control; loading/unloading unit, CO2 extinguishing system; for CBN grinding wheel; tailstock; steady; diamond wheel dresser mounted on the dressing spindle; Wheelhead variant 12 (two grinding spindles can be moved separately).

See details

Listing

Drilling machine and milling machine TOS VARNSDORF WHN 13.8 C

Jászberény

1,829 km

Drilling machine and milling machine
TOS VARNSDORFWHN 13.8 C

€30,000

EXW Fixed price plus VAT

Call

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 07-16 1990, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, A machine in good condition, as shown in the pictures, manufactured in 1990 and equipped with NCT 90 control. It has been used very little and is being sold due to underutilization. The total weight of the machine is 33 tons. The machine is fully operational. Disassembly and transportation are the responsibility of the buyer. Fjdpfjw Sx Agsx Aa Eopd

See details

Listing

Machining Center - Universal DECKEL- MAHO DMU100P duoBLOCK

Grüsch

1,304 km

Machining Center - Universal
DECKEL- MAHODMU100P duoBLOCK

Call

Condition: used, Year of construction: 2006, x-travel 1.000 mm y-travel 1.000 mm z-travel 1.200 mm C-axis 360 x 0,001 ° A - axis ° Control SINUMERIK 840D Powerline SIEMENS Fpjdpfx Asw E Nnnea Ejd Size of table plate 900 x 700 mm milling spindle - taper HSK - A100 spindle turning speed - stepless 12000 U/min toolpiece magazine: chain magazine 180 Stück total power requirement 85 kW weight of the machine ca. 20,5 t dimensions of the machine ca. 6,5 x 6,1 x 3,5 m 5-axis machining center with horizontal milling spindle arrangement SIEMENS SINUMERIK 840D Powerline control system Electronic handwheel NC swivel rotary table Rotoclear window Measuring probe ready Blum laser tool measurement Vibration sensor Tool taper cleaning 4th operating mode Internal coolant system with 2 pumps, 40 bar and 80 bar Chip conveyor Belt filter system Mist and smoke separator Cooling/heating unit

See details

Listing