TIG welding machine 220 A

Kemppi Mini System MP 2400

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,8/2,2 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 1,5 x 1,78 x 1,3 m ACTION PRICE !!! Fgjdpfx Adsd Iiptoasi Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Chip removal brush • Material turntable with ball bearings b. • Adjustable quick-release c. • Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: as good as new (ex-display), container turning device, welding table, welding turntable, roller stand 3000 Kg load capacity with foot remote control Speed infinitely variable 80 to 1600 mm / min. Fgodpfxsd An Aae Adaji diameter 40mm to 1400mm Roller diameter 200mm L: 800 x W:370 x H:450 Model or color deviation possible

Condition: used, TIG welding machine, electric welder KESTRA type WIG 350 AC/DC E-welding machine Serial No. Year of manufacture approx. 1985 Output: 350 amps = 60% duty cycle Fgjdpfsdzql Sox Adaei Adjustment range: 3 stages and fine adjustment Current type: AC / DC Power connection: 400 V, 50 Hz, 32 A plug - 4-metre hose package with TIG torch - 2-stroke / 4-stroke welding function - Water-cooled - Gas pressure regulator Dimensions (L x W x H): 1050 x 560 x 900 mm Weight: 250 kg The welding test shows good results when welding stainless steel with DC and good results when welding aluminium with AC. The HF ignition does not work, the arc can be started via brief contact.

Condition: new, Year of construction: 2024, load capacity: 300 kg, Equipment: foot remote control, rotational speed infinitely variable, Protec KT 300 H welding turntable, 170/400 special version Horizontal load 300 kg, tilted 150 kg Power consumption 220 V, 50 Hz Table diameter 450mm Hollow shaft diameter 170mm Table height 500mm Fgedpfxovbrqxs Adaoi Welding current transmission 400 A Quick-action chuck diameter 300mm, surcharge 550.-€ Quick-action chuck diameter 400mm, surcharge 750.-€ Crank gear motor 0 - 90° stepless adjustment Infinitely variable speed 0.01 to approx. 5 rpm. incl. foot remote control Digital display with welding time limiter (if required)

Condition: used, Year of construction: 1995, cutting diameter 280 mm saw band length 4200 mm cutting width 280 x 280 mm dimensions of saw-band 4200 x 34 x 1,1 mm cutting speed 18 - 115 m/min multiple feeding 0 - 6000 mm power capacity 3,0 kW voltage 400 V total power requirement 5,0 kW Fgedpfx Adop Rai Ejaji weight of the machine ca. 2,3 t dimensions of the machine ca. 2,35 x 2,40 x 2,00 m - serial-no.: 6082 - control: SIEMENS COROS - OP 15 - chip conveyor - multiple feeding - coolant equipment

Year of construction: 2022, condition: new, Technical data: - load capacity: 10.000 kg - Own weight: 850kg - Insertable workpiece diameter: 50 - 3500 mm - Roll diameter: 250mm - Roll width 160mm - turning speed approx. 100-2.000 mm/min - Two-pedal foot switch - Potentiometer for infinitely variable speed control Fgjdjfxw H Aepfx Adasi

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm weight of the machine ca. 3 t High-End Kellenberger 1500U Ideal for spindle producer or overhauler -BEMA Internal grinding device with separate, cooled motor. Grinding spindle and internal grinding spindle motor electrically interlocked! Internal grinding spindle can only be switched on when it is in position. A quantum leap in safety -Infinitely variable grinding spindle speed 1000-1500 rpm -Infinitely variable internal grinding spindle speed 0-100%. -Digital display of grinding spindle speeds Fedpfot Ii Rrex Adajgi -Swivelling angle display top table -swivel angle display grinding headstock -Marposs gaper sensor for external grinding only -fluid gating sensor Marposs internal grinding -Center height up to 250mm possible Machine is already delivered. Identical machine can be built with additional with additional options. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: new, Year of construction: 2024, Container turning device 10 tons lifting capacity Double drive Synkron Axle distance steplessly adjustable by means of thread speed infinitely variable with foot remote control diameter from 300mm to 3500mm Roll width and diameter 120 x 270mm Fgsdpfx Adsifk Rboaji Speed 200 - 1200 mm/min.

Condition: new, table diameter 315 mm 50 Kg 25 Kg Fgedsi Hg I Depfx Adaoi chucking diameter 200 mm turning speeds 0 - 5 stufenlos swivelling range 90 Grad tilt adjustment: manually/mechanicall manuell connected load frequency 230 V weight of the machine ca. 45 Kg dimensions of the machine ca. 800 x 600 x 600 m welding turntable with - With integrated tripod and universal welding torch holder - Quick chuck 200mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable

Condition: used, Year of construction: 2011, 1 used welding machine Manufacturer: Merkle Type: MobiARC 280 cel Year: 2011 Technical data: Welding inverter Merkle MobiARC 280 cel+ - with accessories Primary winding : Mains voltage: 400 V, mains frequency: 50/60 Hz, power consumption: 8,3/5,5 | 9,7/8,3 kW, power consumption: 12/8 | 14/12 A, maximum current: 21/16 A, cos φ: 0.98, Fgsdpfxoh Nvfns Adaoi E-hand welding : electrode diameter: 1.5-6.0 mm open circuit voltage: 96 / 90 V Welding voltage: 20.6-31.20 V Welding current: 15-280 A, current at 60 %: 250 / 260 A TIG welding : open circuit voltage: 96 / 90 V, welding voltage: 10-21.2 V, welding current: 5-280 A, current at 60 %: 250 / 270 A, : , Insulation class: H, Protection class: IP23, operating modes: E-Hand, TIG (DC), cooling: AF, Overall dimensions: 485x200x435 mm Weight: 17,5 kg