Chip extraction fan 5.5 kW

Krämer VFM-S

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Ncjdpfevgrh Uox Afasn Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: ready for operation (used), Year of construction: 1972, Disc diameter: 600 mm Grinding table size: 670 x 280 mm Grinding table swivels up/down: 30/45° Ncsdpfsvkdqiex Afaen Grinding disc drive motor: 1.5 kW Space required: 870 x 650 x 1280 mm including extraction SZ 1, 380 V, 1.5 kW

Condition: used, Year of construction: 2000, Number of boring spindles 5 St. Ncodpfx Afjwztw Seasn Working width 230 mm Working height 160 mm Feed motor 4 kW Feed speed 5-24 m/min.

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg Ncedpfx Asnzpx Rofaen

Condition: new, The solution for shredding large, long pipes and profiles. The ZRS series has been specially developed for shredding pipes with diameters of up to 1,300 mm and made of different materials such as PE, PP, PVC. These machines can directly shred plastic pipes up to a length of 9 meters without prior cutting or sawing. At the heart of the machines are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low speed. The pipe is fed into a closed feed trough in which the pipe is pressed against the rotor by means of a hydraulic ram. The pre-shredded material is then fed from the shredder to a granulator via a conveyor belt. The granulator grinds the material into a directly processable regrind. The entire plant is operated automatically via a central control unit. Another advantage of the plant is the low energy requirement, the avoidance of power peaks, and the minimization of accident risks during pre-shredding. Ncedpfxsghgd Io Afasn

Condition: excellent (used), Year of construction: 2020, Complete sawmill for pallet lumber consisting of: 1. Log yard Häwa, with root reducer and Valon Kone debarker VK 90. Calibrated factory log input measurement system by Jörg. Sorting with 28 bins. Njdpfex T Azwex Afascn Log length 2.0 - 5.0 m. Log diameter from 20 - 90 cm. 2. Sawmill: Möhringer band saw, running bandsaw with Flexi Drive carriage. Slab scanning unit. Round timber intake with step-by-step singulation. Laser measurement by Bidac. Kallfass cross-cut unit. Resaw: EWD Optimes with chipper canter and double arbor saw NKU. Brodbaek edger system. Stacking system for main products, empty pallet handling for both main and side products. Kuka robot for packing side products and main products, four dimensions possible. Complete mechanization, electric and electronic control cabinets, etc. Waste disposal. Detailed plans or video can be provided upon request.

Year of construction: 1998, condition: excellent (used), NEUE HERBOLD cutting mill / granulator Universal mill - heavy version Made in stainless steel -Year of construction 1998 - made of stainless steel Nodpfxoh Rwc Eo Afascn - from technical center (machine was used exclusively for test/demonstration purposes - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives

Condition: new, - Motor power 9kW - PLC-based control, two-hand safety circuit - Cutting force 35to - Splitting table straight design - Cutting channel: - max. blade length L= 2000mm - max. opening H= 1200mm - Machine weight approx. 4 tons - Hand guard in the area of the control panel and opposite - Forklift entry shoes included (for easy transportation of the machine by forklift truck) Stock item - immediately available Price and further information on request Njdpfx Afed Hf Tdeaecn

Condition: excellent (used), Year of construction: 2022, operating hours: 1,530 h, functionality: fully functional, power: 129 kW (175.39 HP), For sale: Arjes Impaktor 250 EVO Year of manufacture: 10/2022 Operating hours: 1530 Equipped with paddle shaft for wood, plastic, commercial waste, etc. A concrete shaft is also included. Nedew Nyt Ijpfx Afaocn The machine is fully operational and can be inspected during operation.

Condition: like new (used), Through feed double end trimmer saws. 2x 3kW saw motors. Feed motor with variator. Ncsdpfx Ajif N Sxjfaen 300mm to 3100mm end trimming capacity. Suitable for use with a moulder infeed or similar.