Injection moulding machine

KraussMaffei 1600/14700 MC

Condition: used, Year of construction: 2004, Technical details: screw size: 105 mm injection shot weight in Polysterol: 4727 g/PS closing pressure: 2300 kN plate size: 2830 x 2400 mm opening stroke: 3700 mm daylight: 1100-1800 mm injection volume: 5195 ccm injection pressure max.: 2296 bar dimensions: 14,2 x 4,15 x 2,84 mm total wight: 143 t tie bars distance: 2000 x 1600 mm Robot system core pulls hot runner controller -     The machine is in a very good condition       -     Additionally complete cutters available. -     A conveyor belt and Robot Systems(Model 2012) Lasdjtrbcbepfx Ah Uok *

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally External dimensions: Height 8,700 mm Width 3,500 mm Depth 1,580 mm 51 supports with a payload of 350 kg each In the clear usable dimensions: H = 255 mm W = 3,050 mm D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Color: gray Drive motor power: 1 x 3.8 kW / 400 volts Laedpjd Spf Rjfx Ah Usk Subject to errors and technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in Germany, Austria and other neighboring countries

Condition: like new (used), Year of construction: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 Robot – RC300 TECHNICAL SPECIFICATIONS: Injection unit: Screw diameter: 135 mm Screw stroke: 610 mm Injection volume: 8,731 cm³ Shot weight (PS): 7,860 g Screw rotation speed: 125 rpm Screw torque: 14,000 Nm Max. screw torque (at reduced speed): 15,630 Nm Plasticizing rate (3-zone screw): 222.9 g/s Plasticizing rate (barrier screw): 279.2 g/s Injection rate: 1,904 cm³/s Regenerative injection pressure: 1,648 bar Maximum pressure: 2,000 bar Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN Barrel L/D ratio: 25 Number of heating zones (incl. nozzle): 8 Heating power: 88.5 kW Clamping unit: Clamping force: 20,000 kN Minimum clamping force: 2,000 kN Opening force with cushion: 1,600 kN Opening stroke: 3,000 mm Max. distance between platens: 3,800 mm Lodpow Aw Taefx Ah Usak Mould height: 800 – 1,800 mm Tie bar spacing (HxV): 2,000 x 1,600 mm Mould platen size (HxV): 2,700 x 2,430 mm Max. mould weight (moving/fixed): 2 x 41,330 kg Max. total mould weight: 62,000 kg Dry cycle stroke (Euromap 6): 1,400 mm Dry cycle time (Euromap 6): 5.5 s Ejector unit: Ejector stroke: 400 mm Ejector force: 385 kN Drive and cooling: Installed main drive power: 265 kW Oil tank capacity: 1,600 l Max. oil cooling capacity (at 25°C): 43.2 kW Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 Robot – RC300 (2022): Z-axis stroke: 4,280 mm X-axis stroke: 1,800 mm Y-axis stroke: 2,600 mm Robot fully integrated with the machine – operated via the machine control panel Machine is in excellent technical condition – latest generation ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, household appliances, technical sectors). Machine is still powered, test possible. AVAILABLE IMMEDIATELY If interested, please contact us – we can provide more photos, operation video, technical documentation, and arrange a convenient date for a visit.

Condition: reconditioned (used), Modernized machine with new LTG StoreControl L control system External dimensions: Height 9,500 mm Width 2,200 mm Depth 2,700 mm 58 beams, each with a payload of 190 kg with clear usable dimensions: W = 1,850 mm D = 825 mm H from 0 to 750 mm Total payload up to 20,000 kg Start of the access opening 900 mm above the top floor, then 850 mm high Color: GRAY/BLUE, beams sendzimier-galvanized Surfaces cleaned, signs of wear possible Lsdpfodnlkhox Ah Usak Performance data Vertical drive 1 x 2.2 kW / 400 volts Horizontal drive 1 x 0.25 kW / 400 volts More Extras: Manual lift door Subject to errors, technical changes, and deviations from photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: good (used), Year of construction: 2006, Krauss Maffei injection molding machine KM 350 - 2700 C2 Year of construction : 2006 Control : MC 4 Technical details Clamping unit : Closing force : 3500 kN Mold opening force, max: 220 kN Moving force of moving plate Opening: 105 kN Moving force of moving plate Closing: 95 kN Size of mold plates (h x v): 1060 mm x 1095 mm Distance between columns (h x v): 710 mm x 710 mm Mold opening stroke: 920 mm Mold height min: 380 mm Max daylight: 1300 mm Hydraulic ejector - stroke: 250 mm Forward/reverse ejector force: 95 / 48 kN Injection unit Lasdpfx Aemki Iujh Usk Auger diameter: 80 mm Ls/D ratio: 20 Injection pressure: 1829 bar Displacement volume: 1433 ccm Injection weight, PS: 1304 g Injection speed: 513 ccm/s Screw speed: 218 1/min Maximum plasticization rate: 108 g/s Nozzle pressure: 173 kN Electrical and hydraulic equipment Nominal pump motor capacity: 75 kW Installed heating power: 36 kW Adjustable barrel heating zones: 7 Tank capacity: 720 ltr. Dimensions and weight Machine dimensions: 6.91 m x 2.20 m x 2.41 m Total weight of the machine: 15300 kg Maximum mold weight: 4780 kg

Condition: excellent (used), Year of construction: 2004, Krauss Maffei KM 2300 - 12000 MC injection molding machine Year: 2004 Control type: MC 4 Number of operating hours 93 900 Closing unit Clamping force: 23000 kN Mould opening force, max.: 1420 kN Moving platen feed force Opening: 227 kN Moving platen feed force Closing: 203 kN Mould platen size (h x v): 2830 mm x 2400 mm Distance between columns (h x v): 2000 mm x 1600 mm Mould opening stroke: 2600 mm Min. mould height: 1100 mm Maximum mould height: 1800 mm Maximum daylight: 3700 mm Hydraulic ejector - stroke: 350 mm Ejector force forward/backward: 415/115 kN Injection unit Screw diameter: 135 mm Ls/D ratio: 23 Injection pressure: 1389 bar Sweep volume: 8588 ccm Shot weight, PS: 7815 g Injection rate: 1019 ccm/s Screw speed: 113 1/min Maximum plasticization rate: 191 g/s Lsdpfx Aswq Ed Aeh Ujak Nozzle pressure: 241 kN Electrical and hydraulic equipment Nominal pump motor capacity: 132 kW Installed heating power: 997kW Adjustable barrel heating zones: 7 Number of drying cycles: 350 1/h Tank capacity: 2500 ltr. Dimensions and weight Machine dimensions: 15.15 m x 4.15 m x 3.29 m Total machine weight: 143,000 kg Maximum mold weight: 62,000 kg LRX 1000 robot X-axis - 2,000 mm Y-axis - 3,000 mm Z-axis - 5,000 mm

Year of construction: 2015, condition: ready for operation (used), - USED - 5-AXIS BRIDGE-TYPE CNC MILLING MACHINE LONGITUDINAL TRAVEL: 2200 mm TRANSVERSAL TRAVEL: 3500 mm VERTICAL TRAVEL: 1400 mm RAPID FEEDS L-T-V: 30 m/min Ledpfx Aewlwg Ssh Ueak TABLE SIZE: 3500 x 2200 mm HEAD: A/B AXIS AUTOMATIC ; HSK-63A ; A-axis -110°+95° B-axis ±360° ; 24000 rpm TOOL MAGAZINE: CHAIN-TYPE ; 42 POS CONTROL UNIT: FIDIA C40 Vision DISTANCE BETWEEN UPRIGHTS: 4200 mm WEIGHT: 62000 Kg ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation Lsdpfxjw U N Ixs Ah Uoak The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Technical Data Year of manufacture: 2007 Clamping Side Clamping force: 13,000 kN Max. opening stroke/installation height: 2,300 mm Max. distance between mounting plates: 4,000 mm Laedpfow Rfkhex Ah Uok Min./max. mold installation height: 1,000 - 1,700 mm Max. platen height: 1,910 mm Min. mold size: 1,020 x 820 mm Clear tie bar spacing: 1,500 mm Nozzle radius: R40 mm Mold weight: 29,000 kg Ejector stroke: 350 mm 1st Injection Side Screw diameter: 120 mm Shot volume: 6,786 ccm 2nd Injection Side Screw diameter: 105 mm Shot volume: 5,195 ccm NC5 Control Core pulls AWS/DS: 1/1

Condition: used, Year of construction: 2021, clamping force: 120 kN, displacement volume: 36 cm³, injection pressure: 2,200 bar, overall weight: 5,400 kg, load hours: 3,500 h, screw conveyor diameter: 22 mm, terms of delivery: EXW (ex Works) delivery time: on request Lasdpfjxwy Utex Ah Uek terms of payment: 100% prior to delivery