Kuper 630 veneer splicing machine

Kuper

Condition: excellent (used), Catalogue number: 7551 TECHNICAL DATA Veneer thickness: 0.4-2mm Passage width under body: 920mm Foot pedal control Table dimensions: 1250x340mm 2 metal pressure rollers Air requirement: 6 bar Bottom-driven rubber roller 2 smooth, metal drive rollers Motor: 0.55kW Dimensions (L/W/H): 1400x550x1500mm Laodpfox Tpmtox Al Nsc Weight: 205kg – German production – Unpainted – DTR documentation – Very good condition – Used stitching machine Net price: 6900 PLN Net price: 1640 EUR, depending on the exchange rate 4.2 EUR (Prices may vary with greater fluctuations)

Condition: new, round material 30 x 1 mm square material 30 x 30 x 1 mm 16 mm 30 x 10 mm speeds 9 U/min total power requirement 1,1 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 0,82 x 0,60 x 1,26 m Electric roller profile with Ledpfx Aeh D Svnel Noac - 5 set of rollers 2x 20mm and 30mm for round material, 1x for flat material 1x for square material 1x for? - footswitch

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Lasdpfxjx Upgcj Al Noc

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, passage height: 250 mm, table width: 1,700 mm, table length: 2,000 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site. Lasdpfxsvvlyis Al Nec

Condition: excellent (used), functionality: fully functional, shelf length 3500 mm shelf width 1300 mm 8 hydraulic cylinders cylinder diameter 85 mm Laedpfx Ajyxwzcsl Njc integrated oil heating power supply 380V

Condition: ready for operation (used), Year of construction: 2011, Number of spindles 6 St. Working width 230 mm Working height 150 mm Length of the planing table 2000 mm Feed motor 5,5 kW Feed speed 7-36 m/min. uper SWT 23 XL-6 Four-Sided Planer ----- Machine fully functional tested! ... Working width min/max: 18 - 230 mm Working height min/max: 8 - 150 mm Spindle configuration: 1st Spindle - bottom ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Pulley diameter: 160 mm Adjustment: axial and radial, manual 2nd Spindle - right ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 160 mm Pulley diameter: min. 110 mm - max. 200 mm Adjustment: axial and radial, manual, via mechanical digital display Adjustment: vertical 35 mm below Table 3rd Spindle - Left ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 160 mm Cutting circle diameter (125 mm): min. 110 mm - max. 200 mm Adjustment: axial and radial manual via mechanical digital display Adjustment: horizontal 18 mm to 230 mm at 125 mm diameter, vertical 35 mm below table 4th Spindle - Top ----- Power: 7.5 kW Lasdpfxsyyqnls Al Nec Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter (125 mm): min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric via mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 5. Spindle - top ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric according to mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 6. Spindle - bottom ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 110 mm - max. 250 mm Adjustment: vertical manual according to mechanical digital display, axial manual Adjustment: Radial 8 to 150 mm with a 125 mm diameter Axially 35 mm Further features: ----- -Infinitely variable feed speed, 7-36 m/min, 5.5 kW motor -Electric height adjustment, 0.75 kW -Siemens touchscreen - Includes existing planer heads (Technical specifications provided by the manufacturer - no guarantee!)

Condition: as good as new (ex-display), Year of construction: 2021, Number of spindles 5 St. Working width 250 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carrier motor-controlled - Additional motor-controlled positioning: right spindle radial and axial left spindle axial - working width 250 mm TECHNICAL DATA ----- Working width (perimeter of tools 163 mm) 15 - 230 mm Working height(perimeter of tools 163 mm) 10 - 150 mm (perimeter of tools 123 mm) 10 - 160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock Lasdewgwmnopfx Al Nec 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled...

Condition: used, the working length up to 2600 mm Steel sheet up to 0.7 mm Ledpfxsdphv Rs Al Njac

Condition: as good as new (ex-display), Year of construction: 2021, Number of spindles 5 St. Working width 230 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. Control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carriage motorized adjustment TECHNICAL DATA in Detail ----- Working width (for tool diameter 125-163 mm): 15-230 mm Working height (for tool diameter 125 mm): 10-160 mm (Tool diameter up to 163 mm): 10-160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Laodpfx Aewgwmhsl Nec Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment range axial 20 mm Connecting piece D = 125 mm Aspiration individ...

Condition: used, Used machine Used veneer splicing machine of the company Kuper type FW 1150 Ledpfx Alowka Rke Neac passage width: 1150 mm feed speed: approx. 10 - 30 m/min Veneer thicknesses: 0.3 - 3 mm without tables in front and behind Availability: short term Location: Röllbach

Condition: new, Year of construction: 2025, Speeds: Level 1: 37-185 rpm Level 2 150-750 rpm Torque in Nm 165+42 Holder size 2 diameter 31 Capacity M3-M24 Working range R = 1800mm Working height (without wheels) 805mm Includes: Ball-bearing, wear-free parallel arm radius: 1800mm 400V/3ph hydraulic system Clamping table 800x600mm with 3 T-slots 19mm Working and return speeds can be set separately electronically (using a frequency converter) Laedpfxovu Uhtj Al Noc Digital depth setting D-Touch, work cycle of your choice Manual: direction of rotation right/left using push buttons Automatic: digital input of depth, the direction of rotation is reversed at the set depth. Digital speed display (in the D-Touch control) Micro spray system for tool lubrication (integrated in the machine head) Quick-change holder for Bilz thread cutting holder with slip clutch, among others incl. 1 set of running wheels 1 set of thread cutting holder M4-M22/24 1 piece reducing ring for M4

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Lajdpfxexgqmxs Al Njc Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: used, Year of construction: 2008, Price: On request Four-axis planer Kuper SWT 23 XL-5R Laodpfxownit Ae Al Njc Year of construction 2008 min/max Working height 8/150 mm min/max Working width18/230 mm Spindle speed 6000 rpm Spindle diameter 40 mm Motors Spindle - horizontal down 7.5kW  Spindle - vertical right 7.5kW Spindle - vertical left 11kW Spindle - horizontal top 11 kW Dimensions 3100 x1850 x 1750 mm (L x W x H), weight 4000 kg Outfeed table  Weidner buffer table Type DBT 4500B Dimensions 4500 x1750 x 97 mm (L x W x H) Available from November 2024 - Year: 2008 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2013, Numerical control PC Office with Widge Plus software Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3200 Panel width min - max mm 215 - 3200 Min - max panel height mm 10 - 60 Edge thickness in roll min - max PVC-ABS mm 0,3 - 3 Continuously variable feed speed 10 - 40 m\min Motorized pressure rubber belt Bearing track with retractable pin Pin height 12 - 18 - 25 mm Distance between the retractable pins mm 500 \ 400 Working groups mounted on NC motorized overtables Squaring part composed of (for each side): Anti-adhesive group Timed automatic anti-splinter group Double Hogger group Edging part composed of (for each side): Gluing unit with pre-melter for PUR glue and pre-melter for EVA glue Edge pressure rollers electronically controlled by N.C. Edge holder magazine with 6 positions End Cutting unit with two motors Rough trimming unit with 2 motors Fine trimming unit with 2 motors electronically controlled by NC Rounding unit with 4 motors 0-90° tilting grooving group electronically controlled by CN (movable shoulder 0-90° tilting grooving group + double superimposed grooving unit (fixed shoulder) Lajdpfxsk Egvds Al Noc Anti-adhesive groups Edge scraper unit Glue scraping unit Brush group Phon group

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Ledpfokn Rz Hex Al Neac Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm