Multi blade saw

LBL Brenta OXIA

Year of construction: 2024, condition: new, - With 5 spindels - Grooved table for short pieces Outstanding characteristics: Sealed safety hood to reduce noise levels and prevent chips from splash Adopting stepless variable feed speed, inverter feed speed of 6- 30 m/min Each spindle driven by independence motor with powerful cutting To fit with heavy – duty cutting as equipping with two pairs of high precision bearing at two ends of spindle assembly Centralized spindle adjustment on the front panel is easy to work Hard Chromed electro plated treatment has been adopted for the durability of the work table surface Hfedpfx Asgp Dcqogpsp Short feeding device is equiped for smooth feed avaliably Bottom driving roller to improve feeding performance Pneumatic pressure feed wheel can be seperately adjusted, make for feed pieces with various thickness Manual oil pump to lubricate the working tables and slides, to be easy to centralized control Pre- trimming cutter on the first bottom shaft and teethed work table was designed to reduce the noise level effectively and cut out the precise linearity Removable work table of vertical spindle was designed of dust proof of efectively protect the screw bar from pollution Special hardness treatment of HRC 58 has been adopted on the work table beside of the first bottom spindle for increasing the durability and natural life of the work table surface Adopting electric component from international class with steady quality TECHNICAL SPECIFICATIONS: - Working width (min): 20 mm - Working width (max): 240 mm - Working thickness (min): 8 mm - Working thickness (max): 180 mm - Number of spindels: 5 kos - spindle speed: 6000 r/min - Diameter of Spindle: 40 mm INSTALLED CUTTER-BLOCKS (from first to last): - first bottom spindle: diameter 108- 145 mm - right spindle: diameter 108- 200 mm - left spindle: diameter 108 -200 mm - first top spindle: diameter 108- 200 mm - second bottom spindle: diameter 108- 200 mm MOTOR POWER: - first bottom spindle 5,5 KW (7,5 HP) - right spindle 5,5 KW (7,5 HP) - left spindle 7,5 KW (10 HP) - first top spindle 7,5 KW (10 HP) - second bottom spindle 7,5 KW (10 HP)

Condition: new, Technical data: Drilling capacity in steel: 50 mm Hsdpfx Aepxmlqsgpjfp Tapping capacity: M33 face milling cutter: 100 mm end mill: 25 mm spindle: MK 4 throat depth: 340 mm Speeds: (6) 50 - 1510 1/min quill stroke: 200 mm quill feed: 0,1 / 0,2 / 0,3 / 0,4 mm/rev table size: 820 x 240 mm traverse path X: 460 mm traverse path Y: 280 mm column diameter: 180 mm Number of T-slots: 4 T-slot size: 16 x 26 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Cross table - thread tightening spindle - Thread cutting device - Automatic spindle feed - LED machine light - Rotatable table - Manual fine feed - Coolant device - Height adjustable protective cover - Limit switch protected spindle

Condition: excellent (used), for ESTERER DKL or DKN Spacer rings in various widths, 85 mm bore with 2 keyways, movable saw bush with left-hand thread, hard chrome-plated CV circular saw blades 450 Ø x 85 Ø and 500 Ø x 85 Ø, 1 tension spanner for saw bushes Hsdpfx Agsh Anxdopsfp

Condition: used, Wood chip boilers Schmid UTSR 900 and UTSR 240, output 900kW + 240kW, year of manufacture 1997, moving grate combustion system (suitable for lower fuel quality), including pneumatic cleaning for 900kW, including ash removal system into container, including multicyclone separator, including feed screw, including walking floor with hydraulic unit - 2 pieces push rods 11m length, 3m total width, including control system, heat exchanger of 900kW unit is leaking, including 2 pieces of 5000l buffer tanks, including chimney systems, disassembly must be carried out by the buyer! Including system documentation! More pictures on request! Heating station layout available! Hsdpfx Aevyrwpjgpofp

Condition: good (used), Year of construction: 2004, functionality: fully functional, feed rate X-axis: 160 m/min, controller manufacturer: Mircotec, workpiece length (max.): 5,500 mm, workpiece width (max.): 700 mm, workpiece height (max.): 100 mm, spindle motor power: 90,000 W, rotational speed (max.): 3,100 rpm, Automatic edging line BFB woodworking machines with Mircotec control. Year of manufacture 2004/2021. Maximum edging width 700mm, maximum edging thickness 100mm, 90kW drive motor. 4 adjustable saws. Included are cross conveyor in the basement, steep conveyor, cross-cut table, measuring/alignment, edger, splitter wedge, and board sorting. The line is fully functional and in good condition. Overhauled in 2021. Hodsxfb Ecopfx Agpofp

Condition: reconditioned (used), Year of construction: 2002, Longitudinal profiling machine for parquet 4+4 motors Minimum working width 80 mm Hfjdpfx Ajvxz Syjgpep M+F profile

Condition: new, table diameter 315 mm 50 Kg 25 Kg chucking diameter 200 mm turning speeds 0 - 5 stufenlos swivelling range 90 Grad tilt adjustment: manually/mechanicall manuell Hjdpfoi Hg I Djx Agpsfp connected load frequency 230 V weight of the machine ca. 45 Kg dimensions of the machine ca. 800 x 600 x 600 m welding turntable with - With integrated tripod and universal welding torch holder - Quick chuck 200mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable

Condition: good (used), Gabbiani SA 300 multi-saw - Italian production TECHNICAL SPECIFICATIONS: cutting width 300 mm engine power 40 kW cutting height 100 mm smoothly adjustable feed feed speed range 8-56 m / min blade diameter 300 mm spindle diameter 50 mm sleeve diameter 70 mm Hfjdpfx Agjhcwrkopjp 3 upper pressure rollers minimum material length 700 mm table top dimensions 1750 x 700 mm three rows of pawls height from the base 740 mm stub diameter 2 x 150 mm dimensions (length / width / height) 270/170/160 cm

Condition: new, Year of construction: 2024, MULTIPLE RIP SAW ANGOMAC MAX DEPTH OF CUT 120 MM Hfjdsh Ia Upopfx Agpop Max. width of cut 480 mm Max. passage width 600 mm

Condition: used, functionality: fully functional, Horizontal block bandsaw BÖGLI ARL150 with hydraulic clamping carriage including complete ALBER sharpening machine with back grinding device. The ideal machine for processing large logs. Hfodpfx Asxp Hzdsgpop Cutting thickness is entered via a 'Mudata' control unit. A ripsaw for splitting is mounted directly on the saw frame. Blade wheel diameter: 1,500 mm Blade wheel width: 170 mm Cutting length up to 8 m Max. clearance: 1,900 mm 5 hydraulic clamping fixtures 3 hydraulic log turners Saw drive power: 45 kW Feed drive, frequency controlled: 5.5 kW (wire rope drive) The machine has been professionally dismantled by our skilled personnel and can be inspected in our warehouse by appointment.