Four Side Planer

Leadermac Compact 526

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 10,000 kg, input voltage: 380 V, Equipment: cabin, Lamellar planing machine 310 x 200 mm + saw spindle Hodpfx Abox Exbdousw

Condition: used, Year of construction: 2018, operating hours: 1,443 h, lifting height: 20,500 mm, fuel type: diesel, construction height: 3,300 mm, gearing type: automatic, Equipment: cabin, Dieci Telescopic Handler Pegasus 50.21 Series: Pegasus 50.21 Remote control Rated load capacity: 5000 kg Load center: 500 mm Tires: 18/22.5 Reach: 18.1 m Load capacity at max. reach: 400 kg Lifting height: 20.5 m Load capacity at max. lifting height: 2500 kg Operating weight: 17480 kg Hodpez Ec A Tofx Abusw Transport length: 7.15 m Transport width: 2.38 m Transport height: 3.03 m Travel speed: 40 km/h Max. gradeability: 40% Engine power: 96 kW 4x hydraulic outriggers + Work platform + Pallet forks + Winch We would be happy to assist you with financing/leasing options through our partners. All information is subject to change without notice. Errors and prior sales excepted.

Condition: used, REX HOMS-410K — 12-Spindle Four-Side Moulder Manufacturer: REX Holzbearbeitungsmaschinen (Georg Schwarzbeck GmbH & Co KG), Germany Model: HOMS-410K Machine No.: 22.303 Year of manufacture: 1998 Hjdpfx Aeztxyysbujw Voltage: 400V / 50Hz Number of spindles: 12 Feed mechanization: HIT Operating hours: ~6,000 mth

Condition: excellent (used), Year of construction: 2000, operating hours: 10,900 h, functionality: fully functional, overall weight: 16,000 kg, power: 338 kW (459.55 HP), Willibald MZA 3500 / Shredder / Chipper / Crusher • Manufacturer: Willibald • Type: MZA 3500 • Year of manufacture: 2000 • Operating hours: 10,900 hours • Engine: MAN D 2876, 6-cylinder diesel • Power: 338 kW / 460 hp • Inlet opening: 500 mm • Number of axles: 2 tandem axles • Braking system: Air pressure • Number of rotors: 48 • Rotor speed: 1300 rpm • Tow hitch: 40 mm • Fiberizing of organic material for composting up to a diameter of 30 cm Hedpfxjzdtzmj Abuow • Shredding of old wood, waste wood up to a diameter of 30 cm • Total weight: 16,000 kg • German machine • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: used, Year of construction: 1993, Generator set / emergency generator Manufacturer: Leroy-Somer Type: LSA 44.1L6 AREP Year of manufacture: 1993 Hsdoztnfrjpfx Abuew Continuous power: 80 kW / 100 kVA Voltage: 400 V (three-phase) Frequency & speed: 50 Hz at 1500 rpm Current: approx. 144.3 A 191026ä

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 3,178 h, empty load weight: 16,095 kg, Manufacturer: Manitou Type: MRT 2150 Privilege Year: 2010 Capacity (t): 4,999 kg Hedez Aqyqspfx Abuow Hours: 5,070 h Mileage: 3,178 km Lift height: 20.60 m Weight: 16,095 kg Ground clearance: 0.37 m

Condition: excellent (used), functionality: fully functional, Working dimensions: 230x160mm Spindle configuration: 1. Lower 15kW – Powerlock 2. Right 15kW – Powerlock 3. Left 15kW – Powerlock 4. Upper 22kW – Powerlock 5. Lower 15kW – Powerlock 6. Upper 30kW – Powerlock 7. Lower 15kW – Powerlock Feed drive - 7.5kW Spindle speed 12,000 rpm Pneumatic pressure rollers for the infeed Feed drive on cardan shafts Smooth feed speed adjustment 6/36 m/min Hodpjzi Tz Refx Abujw Automatic lubrication of the table Table made with MaratonCoating technology Control system: PowerCOM with motor control in Polish Soundproof cabin VibroControl vibration sensor Year of manufacture: 2010 Highnech E1 feeder, 2010 Infeed rollers driven by a 7.5 kW hydraulic pump.

Condition: reconditioned (used), Year of construction: 2015, Number of spindles 9 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 7,5 kW Working speed 6-36 m/min weight of the machine ca. 6500 kg Control CONTROL 100 PC PLUS Hjdpfxozl Hbio Abuow SCM Topset XL, Year of Manufacture 2015; currently undergoing partial recondtionning in stock ----- Summary: - 9 spindles (including 4 x HSK 85 S) - Electronic horizontal and vertical positioning - 8,300 rpm - SCM "Set-up" - SCM "T-Set" - Includes workpiece infeed magazine Working dimensions: - Maximum working width: 240 mm - Minimum working width: 25 mm (reducible to 15 mm via installed special kit) - Maximum working height: 120 mm - Minimum working height: 10 mm (reducible to 6 mm via installed special kit) Special working cross-section equipment: Equipped with a special kit for extremely small minimum cutting dimensions of 15 x 6 mm. Infeed table and table surfaces: - Infeed table length: 2,500 mm (2.5 meters) - Surface finish: Wear-resistant, special chrome-plated finish for optimal sliding properties and minimal wear. Spindle specifications: 1. Spindle: 1st horizontal spindle (BOTTOM): - Motor power: 11 kW - Speed: 6,000 rpm - Shaft: High-precision spindle, 40 mm diameter 2. Spindle: 1st vertical spindle RIGHT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 3. Spindle: 1st vertical spindle LEFT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - Tool diameter adjustment "SET UP": Electronic regulation of tool diameter, tool diameter positioning 4. Spindle: 2nd vertical spindle RIGHT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 5. Spindle: 2nd vertical spindle LEFT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - Tool diameter adjustment "SET UP": Electronic regulation of tool diameter, Tool diameter positioning 6. Spindle: 1st horizontal spindle (TOP): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spindle, 40 mm diameter (working length 250 mm) - Tool clamping: "T-SET" quick-clamping system for tools - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - "SET UP" tool diameter adjustment: Electronic tool diameter regulation, tool diameter positioning 7. Spindle: 2nd horizontal spindle (BOTTOM): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spindle, 40 mm diameter (working length 250 mm) - Tool clamping: "T-SET" quick-clamping system for tools - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 8. Spindle: 2nd horizontal spindle (TOP): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spind...

Condition: excellent (used), Year of construction: 2005, operating hours: 6,701 h, functionality: fully functional, overall weight: 19,000 kg, Doppstadt DW2560 Buffalo/Shredder/Chipper/Crusher/Slow-Speed Machine • Manufacturer: Doppstadt • Type: DW2560 • Year of manufacture: 11/2005 • Magnetic tape • Operating hours: 6701 hours • Engine: Mercedes Benz OM 442 Diesel engine Hodpfszz Sn Tox Abujw • Slow-speed machine • Roller length: 2.5 meters • Roller diameter: approx. 600 mm • Roller: 17 teeth • Discharge height: 2.9 meters • Throughput: material-dependent, in the range of up to approx. 30 t/h • Remote control • Rear discharge conveyor • Transport length: 20 m • Transport width: 2.51 m • Transport height: 3.95 m • Total weight: 19000 kg • German machine • Immediately ready for operation • This offer is non-binding and without obligation. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 102940, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED. FEED MOTOR 22 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH 220MM TOP FEED ROLLERS BOTTOM 15KW 6,000 RPM, OUTBOARD BEARING, JOINTER READY RIGHT 11KW 6,000 RPM JOINTER READY LEFT 15KW 8,000 RPM JOINTER READY RIGHT 11KW 8,000 RPM JOINTER READY LEFT 15KW 8,000 RPM, JOINTER READY TOP 18.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY + OUTBOARD BEARING TOP 18.5KW 7,100 RPM OUTBOARD BEARING, JOINTER READY + OUTBOARD BEARING BOTTOM 22 KW 4,000 to 8,000 RPM BY INVERTER, OUTBOARD BEARING, JOINTER READY Hodpfezv Sz Nex Abuew 12X TOP FEED ROLLERS (2X 220MM + 10X 140MM) 7X BOTTOM FEED ROLLERS POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED MACHINE LENGTH 5.2M