Top surface thicknessing planer

LEDINEK ROTOLES 400 D

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 3186, For sale: industrial planer LEDINEK ROTOLES 400 D-S. Year of manufacture: 2000. Max. working width: 400 mm Max. working height: 2–150 mm Min. workpiece length: 150 mm Max. material removal: 8 mm Rotating shaft with 34 knives Feed speed: 10–30 m/min. Motorized thickness adjustment with digital display. Extraction hood diameter: 200 mm (required air speed: 30 m/s) Main spindle motor: 15.0 kW Feed motor: 3.0 kW Gsdpfexyan Sjx Aadoin Total power: 18 kW Total weight: 1,800 kg.

Condition: new, Year of construction: 2026, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Giodshw Ng Ispfx Aadsn Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device Program creating lists on PC in XML

Condition: used, Year of construction: 2017, functionality: fully functional, total width: 400 mm, power: 26 kW (35.35 HP), TECHNICAL DATA Maximum working width: 400 mm Working height: 2 - 150 mm Minimum workpiece length: 150 mm Worktable height: 900 mm Electric motors: Thin sheet planer motor power: 22.0 kW Giodpfxew Thpfo Aadon Drive motor: 3.0 kW Lifting motor: 0.50 kW Tool: Rotor speed: With adjustable drive speed: 2,100–3,000 rpm Number of knives: 48 pcs.

Condition: new, 3000 mm Giedofv Attopfx Aadon Working width 360 mm Wheel width 360 mm roll diameter 60 mm 900 kg height adjustment 650 - 1100 mm weight of the machine ca. 0,050 t dimensions 3,1 x 0,45 x 0,6 m

Condition: refurbished (used), HYDRAULIC HOT PLATE PRESS, MODEL LS/L/R 30/13 SP. 150 mm Composition Giodjn R Dihjpfx Aadon - LOADER - HYDRAULIC PRESS WITH HOT PLATENS, MODEL LS/L/R 30/13 SP. 150 mm - 3000x1300 mm HOT PLATE ROLLERS UNLOADER Press platen dimensions 3000x1300 mm. Press plungers No. 6 Ø 70 mm stroke 200 mm. Press platen thrust 70 t.

Year of construction: 2022, condition: new, functionality: fully functional, Lauber wood dryer longitudinal ventilation Chamber with stacking trolley Net volume 7.2 m3 with wood temperature measuring point -> new / unused / original packaging -> available immediately (standard delivery time approx. 3/4 year) -> see detailed description in the photos -> collection, loading, etc. by buyer -> transportation, customs clearance and insurance by buyer Giodpjmidtrsfx Aaden

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway - for exact technical specification please open attached document in PDF below. Giodpfomgc I Nex Aaden Cross section UniTec 12: - saw unit - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 - Hubspindel no.3 Long , profile section UniVar 12: - Profil cutter - Profil cutter - Profil cutter horizontal - Profil cutter - Profil cutter - Profil cutter Total el power 114 kw 400 V AC Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Payment: Prior to loading Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986.

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels Gedpscggy Sofx Aadsin - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: excellent (used), Year of construction: 2007, High speed moulder infeed comprising a freestanding flat magazine for use in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 11kW hydraulic unit (max 150m/min). 15kW hydraulic unit (max 200m/min) possible to offer also. Suitable for 300mm wide feed material. A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814. Godoggghmjpfx Aadsin

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm Giodpfx Aajt R T Hcjdsn 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA