Return of panels for edgebander

Ligmatech ZHR 01

Condition: used, machine/vehicle number: 007986, Max. panel width: 800 mm Max. panel length: 2000 mm Hnjdpex A Tggsfx Apnsl Panel return for edgebander: Right

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Hnjdpfx Apowyda Uonsl Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Year of construction: 2010, condition: used, Panel return system for use with a single edgebander The panel is transported towards the operator via a motorized belt and a roller\belt table. Moeller mini control Maximum panel dimensions 2500 x 1450 mm Maximum panel height 60 mm Working speed 8 - 25 m\min Hjdpfx Apsrq Dmrjnonl Working height from the ground 835 - 960 mm

Condition: used, Panel return system for use with a single edgebander The panel is transported towards the operator via a motorized belt and a roller\belt table. Moeller mini control Maximum panel dimensions 2500 x 1450 mm Maximum panel height 60 mm Working speed 8 - 25 m\min Working height from the ground 835 - 960 mm Hnodsw Ahixjpfx Apnjl

Condition: used, machine/vehicle number: 007716, X axis working area: 3250 mm Y axis working area: 1220 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 18 Hnjdpfjwuz N Njx Apnol Total number of tool changer positions: 16

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Hnodpsqt Dmyefx Apnel Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2024, condition: new, Return System Year of manufacture: 2024 The RTS Compact is a standalone system that can be connected to any edgebanding machine (KAM), regardless of the manufacturer. The feed speed is continuously adjustable to match the speed of the edgebander. The RTS Compact is supplied complete with a control cabinet and is ready for operation immediately after installation. Optional: "RTS Compact Conveyor Extension" for easy rotation of parts during cross-edge banding. Hnjdpfx Apsw Nadmensl Optional: "RTS Compact Ergonomics Package" available. A lift table and air cushion table are used at the end of the return conveyor. This option enables ergonomic operation. - Compatible with edgebanders from all manufacturers - Allows single-operator control of the edgebander - Maximum ergonomics - Reduced personnel costs - Gentle material handling - Installation time approx. 0.5 day - Turning device for small parts - With conveyor belt L 4500 x W 800 mm Single-track roller rail RTS Compact control, optional control box Availability: short-term Location: Flörsheim

Condition: new, Model Name Hjdpfx Apjgvquwjnonl Shark 332-1 CCS

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Lamella - carcass press with rapid traverse Technical data: Lamella carcass press from our showroom; Working range: width from 150 - 2.500mm , height from 150 - 1.400mm; depth 700mm; - lamella press beam top with 6 elements, lamella press beam side with 5 elements - lamella press beam with practice-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressing bars is infinitely variable electronically controlled by 2 potentiometers and adjusted via frequency converter, therefore the torque transmission is absolutely wear-free. - Pressing force for horizontal press bars min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press bars min. 300 daN (kg) to stepless max. 2200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the press bars, controlled by automatic workpiece recognition with sensors in the press bars, press speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Jog mode for precise positioning of the two pressing beams e.g. for low pressing forces, drawers and carcasses 45 degrees. Simple operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. Machine is in our showroom and can be delivered immediately. Hodpfsiidm Nox Apnsnl Location: ex stock 54634 Bitburg - immediately available -

Condition: new, table length 1300 mm table width 800 mm stroke height 1010 mm weight max. in kg 1000 kg 190 mm connected load frequency 380 V Hjdpfx Apjfrztxonsnl total power requirement 0,75 kW weight of the machine ca. 0,22 t dimensions of the machine ca. 1,3 x 0,8 x 0,2 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.