Press brake

Condition: good (used), Press Brake Brand: AMADA Model: HFT 80/25 Hodpewivddofx Addsfb Capacity: 2500 x 80T 4 axes Distance between uprights: 1800 mm Dimensions: 3500 x 1500 x 2100 mm Weight: 6,500 kg Equipped with new and used tooling

Condition: new, Year of construction: 2024, Electro hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: 400 V 50-60 Hz immersed motor control unit. Pump for fast approach and return in 20 bar calibration. Adjustable pressure pump with handwheel to obtain the required power. Hodpfx Adefh R N Djdofb Pressure relief valve with mechanical block to prevent overpressure. Pressure gauge (standard) that allows to calibrate with extreme precision the delivered power. The P110 MR is the only hydraulic press consisting of 2 laser-cut FE 510 monolithic structure uprights. without welding in the places of greatest stress This feature gives it extraordinary robustness. It is non-deformable and guarantees tight working tolerances. The P110 MR is equipped with a 30-litre tank and has a rapid descent speed of 1,400 mm/min. Weight : kg 1,100 Max pressure : bar 350 Max. flow rate : t. 110 Rapid flow rate :l/min 34 Slow flow rate : l/min 5 Inside shoulders : mm 1004 Rapid rod feed : mm/min 1.400 Slow rod feed : mm/min : 130 Voltage : V 400 Frequency :Hz 50-60 Power : kW 3 Max. absorbed current : A 7,3 Cylinder stroke : mm 300 Cylinder diameter : mm 200 Stem diameter : mm 110 Piston descent speed : mm/sec 23 Tank capacity : litres 30

Condition: excellent (used), Year of construction: 2012, Technical specifications: Working length: 4300 mm Distance between columns: 3230 mm Press force: 400 tons CNC control: AMADA AMNC Number of controlled axes: 5 CNC crowning Stroke: 350 mm Throat: 420 mm Installation height: 620 mm Motor power: 38.5 kW Hfodjwl U Rhspfx Addsb Laser monitoring: FIESSLER Table height: 960 mm Dimensions (length x width x height): approx. 5550 x 2950 x 3400 mm Weight: approx. 29.5 tons Condition: Very good condition, approximately 30,000 hours The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. Hfodjd E A I Ijpfx Addsb We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Year of construction: 1981, condition: good (used), machine/vehicle number: 3626, OFFER 21448 Technical data: - max. working width 2540 mm - max. cutting capacity St 40 4 mm Hjdpfxjhhc Ixj Addefb - mot. cutting angle adjustment - cutting gap adjustment by scaled adjusting screws - number of hydraulic hold-downs 14 pcs. - motorized backgauge with positioning stop 10 - 1000 mm - Stroke rate depending on cutting angle and cutting length 23 per/min - hydraulic drive 400 V / 7,5 kW - table height 1030 mm - space requirement approx. W 2500 x H 1630 x D 2150 mm - weight approx. 3600 kg - with: - pneum. supported sheet metal support - front angle stop + support arms - Electronic cutting depth adjustment - cutting line illumination - E-foot switch

Condition: used, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-forming sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Hfjdpfodzqblsx Addjb Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The seam is the doubling over of the sheet metal edge (1x folded over) to increase the stiffness of the sheet. By folding over, a rounded edge is created, reducing the risk of injury from sharp sheet edges. Ideal for metalworking applications such as sheet metal furniture, cladding panels, or for the production of ventilation and silencer components.

Condition: excellent (used), Offered is a used slurry pump / sewage pump. SDAG Wismut-Aue. Details see photos. Hedpfjhwnfcjx Addefb

Condition: used, Pillar drilling machines Hfedpfx Aob N Ezreddeb

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Hodpfxsn N Ekco Addsfb Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition

Condition: excellent (used), Year of construction: 2024, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 2MAM022829, cooling capacity: 1,000 kW (1,359.62 HP), Cooling Capacity: 959 kW Type of Input Current: 3 Phase / 50 Hz / 400 V Type of Cooling: Air-cooled Overall Weight: 7,973 kg (Operating) / 7,597 kg (Rigging) Ambient Temperature (max.): 35°C Ambient Temperature (min.): 12.8°C (based on part load performance) Compressor Type: Screw, semi-hermetic, VSD controlled Total Power Consumption: 309.9 kW Noise Level: 74 dB(A) 10 m Refrigerant Type: R134a, total charge: 242 kg Water Flow Rate: 146.7 m³/h (40.76 L/s) Pressure Drop (Evaporator): 52.2 – 64.1 kPa Hedpfx Ajimz Uaoddofb COP (Full Load): 3.09 IPLV (Part Load): 5.12 Number of Fans: 14 units (7+7), with low sound kit Nameplate Available: Year of Manufacture: 2018