Permanent magnetic plate 500 x 170 mm

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: M01.16.21.51.02, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,600 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 500 mm Travel range W-axis: 1,200 mm Travel range B-axis: 360° Spindle speed: 10,000 rpm Spindle motor power: 30 kW Bwedpjznkpvofx Aqgsr Feed drive: Brushless AC servo motors Feed rate: 0–20,000 mm/min Rapid traverse X-axis: 20,000 mm/min Rapid traverse Y and Z axes: 20,000 mm/min Manual mode: 20,000 mm/min Setup operation: 0–2,000 mm/min Table size: 1,500 × 1,500 mm T-slots: 5 × DIN 650-22 H12 T-slot spacing: 150 mm MACHINE DETAILS Tool clamping: Hydraulic Electrical connection: 400 V Frequency: 50 Hz Compressed air operating pressure: 6 bar Nominal flow rate: 7,000 rpm

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Bsdpfjua Tbwsx Aqgowr Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 480 mm, controller model: Heidenhain TNC 407, rotational speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 420 mm Travel range Z-axis: 480 mm Table size: approx. 3,000 × 500 mm Spindle connection: SK40 Maximum speed: 6,000 rpm Tool changer: 22-position MACHINE DETAILS CNC control: Heidenhain TNC 407 EQUIPMENT Additional angular/universal milling head Bodpfozncnqsx Aqgswr Coolant system Documentation/manual 4/5-axis machining: possible Machining of complex workpieces: possible

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller model: Siemens 840D, spindle speed (max.): 12,500 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 800 mm Spindle speed: 12,500 rpm Bwjdjzncnkjpfx Aqgsr Number of axes: 4 Pallet size: 630 × 630 mm Max. tool length: 600 mm MACHINE DETAILS Control system: Siemens 840D

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective System needs to be repaired. Bwedpfx Aqevmivcegor Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Machine is being sold as defective Without guarantee - without warranty -

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, controller model: Siemens 840D, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,100 mm Spindle speed: 8,000 rpm Pallet size: 630 × 630 mm Rotary table: 360,000 × 0.001° Tool positions: 400 Tool interface: HSK 100 Number of machining axes: 5 MACHINE DETAILS Bjdpfjzncndsx Aqgowr Control system: Siemens 840D

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 27,875 h, machine/vehicle number: 150204, laser type: CO₂ laser, laser wavelength: 10 nm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser type: CO₂ laser Average power: 200–5,000 W Peak power: up to 6 kW Wavelength: 10.6 µm Beam quality factor M²: < 2.4 (typically 2.1–2.3) Beam divergence: 1.5 mrad (half-angle) Beam diameter at the output: 15 mm (1/e) Bwjdpfjzncm Hex Aqgjr Beam diameter at the output: 21 mm (full beam) Pulse repetition rate: 0–2 kHz Pulse width: 250 µs Pulse resolution: 70 µs (?) Alignment stability: ± 150 µrad (?) Wavelength: 635 nm Output power: < 1 mW MACHINE DETAILS Ambient temperature: 10–40 °C Relative humidity: < 95% (non-condensing) Connected power: 37 kW Voltage: 400–460 V AC Voltage tolerance: ± 10 % Power connection: 3-phase Required cooling capacity: 45 kW Flow rate: 133 l/min Inlet temperature: 18–20 °C Maximum inlet pressure: 6 bar Nominal inlet pressure: 3 bar Differential pressure: 1.5 bar Cooling medium: Distilled water with 35 % Dowfrost HD Filter fineness: 100 µm Helium purity: 99.996 % Helium proportion: 67.7 % Helium consumption: 13.4–46.8 SLPH Carbon monoxide purity: 99.995 % Carbon monoxide proportion: 4.1 % Carbon monoxide consumption: 0.9–3.0 SLPH Nitrogen purity: 99.996 % Nitrogen proportion: 28.2 % Nitrogen consumption: 5.8–20.2 SLPH Total gas consumption: 20–70 SLPH Maximum proportion of water vapor, hydrocarbons, and oxygen: < 10 ppm Compressed air: dry Compressed air dew point: < 2 °C Operating hours (according to meter): 27,875 h

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm Bodstqfhxjpfx Aqgswr For an M5 x 30 screw: approx. 100 mm Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 42.503, clamping force: 4,000 kN, screw diameter: 70 mm, injection pressure: 1,481 bar, injection weight: 1,040 g, overall weight: 5,600 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 4,000 kN Platen size: 1,300 × 1,080 mm Minimum tool height: 350 mm Maximum opening stroke: 1,300 mm Screw diameter: 70 mm Injection volume: 1,155 cm³ Injection weight: 1,040 g Injection pressure: 1,481 bar MACHINE DETAILS Electro-hydraulic system Rated power of pump motor: 45 kW Dimensions & Weight Bwsdpfxszncmtj Aqgor Dimensions (L × W × H): approx. 8,000 × 2,250 × 2,200 mm Weight: approx. 5,600 kg

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 161394, clamping force: 6,500 kN, screw diameter: 90 mm, injection weight: 2,254 g, overall weight: 33,000 kg, TECHNICAL DETAILS Clamping force: 6,500 kN Distance between columns: 1,025 × 930 mm Bjdpfx Aozncmaoqgowr Minimum mold height: 450 mm Maximum mold height: 950 mm Maximum opening width: 1,800 mm Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g MACHINE DETAILS Rated power of pump motor: 55 kW Heating capacity: 62 kW DIMENSIONS & WEIGHT Dimensions at installation site (L × W × H): 8,300 × 2,500 × 2,330 mm Weight: approx. 33,000 kg

Year of construction: 1979, condition: good (used), machine/vehicle number: 2001, disk of circular saw-Ø: 400 mm cutting area at 90° round: 95 x 240 mm cutting area in mitre at 45° round: 75 x 180 mm disk rotations: 10,5 u. 21 upm engine: 380 V, 2,6/3,2 kW space needed: 1500 x 1100 x 2150 mm weight: 630 kg Bwedpfxofnrw Ss Aqgor

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: 417/1-505, functionality: fully functional, operating hours: 29,856 h, cutting height (max.): 80 mm, cutting width (max.): 3,100 mm, saw blade diameter: 350 mm, cutting length (max.): 4,200 mm, Equipment: scorer, The machine is still in operation and will be available starting October 9, 2026! TECHNICAL DETAILS Cutting length: 4,200 mm Cutting width (program slider travel): 3,100 mm Cutting height: 80 mm Saw blade overhang: 85 mm Min. clamping width: 0 mm Max. clamping width: 1,300 mm Saw units Main saw motor: 11 kW Main saw blade diameter: 350 mm Scoring saw motor: 1.5 kW Scoring saw blade diameter: 180 mm Motorized groove cutting device: 0–35 mm MACHINE DETAILS Software: Opti-Cut Display: 17″ TFT Control system: Opti-Cut Electrical data Operating voltage: 400 V (+10 % / -5 %) Mains frequency: 50 Hz Electrical connection rating: 20 kW Total weight: 6,200 kg Operating hours: 29,856 h EQUIPMENT Bsdpfx Aqjznbkksgewr Angle stop on the left 7 roller rails 8 clamping devices Clamping device opening: 82 mm First clamping device with double finger 4 air cushion tables 1 central blower Labeling package including label printer Opti-Cut software installed Printing and clamping system Cutting height automation Pressure beam height control Angle and backstop device

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 0-250-08-1590, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,220 mm, travel distance Z-axis: 125 mm, controller model: Homatic 2000 IPC, number of spindles: 28, spindle speed (max.): 24,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area X-axis: 200 – 3,250 mm Working area Y-axis: 70 – 1,220 mm Working area Z-axis: 12 – 125 mm (clearance 150 mm) Tool changer positions: 18 Spindles Total number of drilling spindles: 28 Vertical drilling spindles: 22 Horizontal drilling spindles in X-axis: 4 Horizontal drilling spindles in Y-axis: 2 Milling spindle power: 12 kW Milling spindle max. speed: 24,000 rpm C-axis: 360° interpolation MACHINE DETAILS Vacuum pump capacity: 100 m³/h Control model: Homatic 2000 IPC Control software: WoodWop 4.5 incl. MDE and production list software FEATURES 4 axes Console table Bedoznbgrepfx Aqgewr 8 manually adjustable supports in X direction 3 vacuum cups per console Vacuum connection for templates Laser positioning aid for vacuum cups Laser projection for cup positioning Liquid circulation cooling Operator terminal Note: The sale does not include the pictured adapter units, tools, or HSK holders.

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate -Magnetic plate: clamping surface 800 x 250 mm Bwedpjh R D Rdofx Aqgsr -Voltage: 110V 1.7A -Transport box: included -Quantity: 1 piece available -Dimensions box: 1160/480/H250 mm -Weight: 112kg

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: X12199, turning length: 320 mm, turning diameter: 32 mm, overall weight: 2,580 kg, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Turning length: 320 mm Turning diameter: 32 mm Bsdpfx Aqszlqdzsgjwr MACHINE DETAILS Total weight: 2,850 kg EQUIPMENT Citizen C32-VIII (year of manufacture 2007) LNS Express 332 bar feeder Chip conveyor Parts conveyor belt