Mahr OMS600 CMM with guarantee

Mahr OMS 600 werksüberholt mit Garantie

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, grinding wheel width: 150 mm, grinding wheel diameter: 305 mm, year of last overhaul: 2025, Grinding wheel diameter 305x150 mm, workpiece diameter 1-40 mm, machine for plunge and through-feed grinding, PLC control, coolant system, hardened and ground guideways, grinding and regulating spindles with hydraulic slide bearings via three-point bearings, hydraulically adjustable dressers for grinding and regulating wheels, regulating wheel drive adjustable via AC motor, new German-made electrical system with Siemens components, Siemens S7 control system Chedpfx Aowi H Uaeflef

Year of construction: 2024, condition: new, Working space Cedpfeh Hxubjx Aflshf 1100 x 660 x 816 mm (W x D x H) Blasting chamber Dust-tight vacuum cabin in stable sheet steel construction Working gloves special rubber, wear resistant, cotton inside, firmly connected to the cabin against dust leakage Doors Blasting chamber W x D x H = 1100 x 660 x 816 mm Two side doors, dust-tight closing, double-walled, sound-absorbing foam, lockable, with electrical shut-off safety device Blasting media recovery Via coordinated MHG recovery system Operation ON/OFF switch for suction and lighting, pressure regulator, manometer and foot switch Viewing panels

Condition: used, 3D Coordinate Measuring Machine ZEISS NUMEREX - Not Functional Granite Measuring Table, Granite Surface Plate, Measuring Table Chedpfx Afefy U Ewjlef Model No. 3648-18, Serial No. X-1019, Year of Manufacture approx. 1986 Measuring Range X = approx. 1250 mm, Y = approx. 900 mm, Z = approx. 400 mm Measuring Plate L x W 1525 x 1435 mm Usable Surface 1525 x 1100 mm Plate Thickness 305 mm Clearance Width in the Portal 1100 mm Probe Mount Ø 9.5 mm Compressed Air Connection 6 bar Power Supply 230 Volt, 50 Hz - Granite plate with steel inserts with internal threads - Axis adjustment with pneumatic slide guide for X, Y, and Z axis - Plate mounted on base frame with 5 leveling feet, 3 support plates for the feet - Computer and software missing (not available and not included) → not functional! Space required for the measuring machine L x W x H 1600 x 1850 x 2200 mm Machine weight approx. 2.8 tons Plate is damaged on one side – see photo, otherwise in good condition

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: Heidenhain, controller model: TNC7, table load: 5,000 kg, spindle speed (max.): 10,000 rpm, Equipment: chip conveyor, Used 5-axis machining center by DMG with TNC7 control system Retrofit 2025 DMG Deckel Maho DMU 200 P Year of manufacture: 1999/2025 Condition: Good and fully functional Control: Heidenhain TNC7 Travel distances: - X-axis: 1800 mm - Y-axis: 2000 mm - Z-axis: 1100 mm Technical specifications: - Rotary table Ø1400 x 1700 mm - Table load capacity: 6000 kg - B-axis - 60-position tool changer - SK 50 spindle taper - 10,000 rpm - ICS (internal coolant supply) - 980-liter coolant tank - Chip conveyor - Rinsing gun - Infrared probe Optional: - Kineopt - VCS-Complete Chsdpfxsxtwkws Aflsf - High-frequency spindle, 30,000 rpm Transport and commissioning can be offered separately. Interim sale reserved. No guarantee is given for the technical details provided here. Statutory regulations apply.

Year of construction: 1990, condition: excellent (used), Equipment The machine can be upgraded with new software and control system according to customer requirements. Measuring range X = 850 mm Y = 1200 mm Z = 600 mm Measurement accuracy 2,5µ + L/250 Price: on request! Cedpfx Afeff Eakjlohf We would be happy to provide you with a detailed offer! Please note: Our offer is directed exclusively to professional customers. (Changes and errors in the technical data, information and prices as well as prior sale reserved)

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm Diameter of the table 1500 mm max. module 22 Control 840D turning speeds 3,5 U/min table load capacity 20000 KG Distance of shafts 70...1220 mm Stroke length 30...330 mm no. of strokes 10...200 Hub/min total power requirement 138 kW weight of the machine ca. 38 t dimensions of the machine ca. 11x5 m machine: Full CNC machine with electronic rolling coupling for C- and D-axes and digital INDRAMAT drive technology. Stiff machine bed in welded construction. Radial axis (X-axis) with hardened guideways, sliding guide with wraparound, longitudinal guide with roller recirculating shoes. Ground preloaded ball screw with play-free preloaded nut. Digital AC drive technology with play-free gearbox. Linear measurement system for radial positioning. Freestanding machine table with electrohydraulically play-free preloaded double worm gear, part wheel diameter 1365 mm, hydrostatic axial and radial bearings, automatic compensation of the workpiece weight. Table hole with a diameter of 500 mm through and open at the bottom. Water-cooled digital AC servo motors. The machine is to be installed on a foundation. Machine stand: as a highly rigid cast construction for axial travel of 1200 mm. Axial axis (Z-axis) with hardened guideways, slide-guided, longitudinal guide and wraparound with roller recirculating shoes. Ground ball screw with play-free preloaded nut. Digital AC drive technology. Encoder for axial positioning. Shapping head: SK 4.1 with hydraulic NC servo drive for impact spindle movement and cutting wheel lifting, stroke length 330 mm, impact spindle diameter 160 mm. Hydrostatically supported impact spindle, linear guide and lateral guide for the lifting mechanism. Maximum tool diameter 300 mm. Drive motor power 30 kW. Stroke rates from 10 - 200 DH/min, stroke speed from 5 - 45 m/min. Csdpfx Afev E R Eielehf Impact spindle speed for working and return stroke independently programmable. In the cutting area, the spindle speed remains constant. Maximum cutting wheel speed 10 rpm, digital AC drive technology. Cutting wheel lifting correction for internal and external gearing manually reversible. Lateral offset of the impact spindle axis up to 50 mm from the machine center to prevent return stroke collision of the cutting wheel, manually adjustable.

Condition: used, Year of construction: 2006, travel distance X-axis: 980 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, table width: 1,250 mm, table length: 750 mm, rotary table diameter: 700 mm, DMG DECKEL MAHO DMU80 monoBLOCK HEIDENHAIN iTNC530 Rotary T: dia700mm T:1,250x750mm 18,000rpm HSK-A63 ATC32 Touch probe TS640 Blum Laser Chip Conveyor Csdpsvxngdofx Aflshf

Condition: good (used), STAR SV-32 CNC sliding headstock automatic lathe TECHNICAL DATA Main spindle, bar capacity: 32 mm Travel: 310 mm Spindle speed: 7000 rpm Spindle drive power: 7.5 kW Minimum resolution, C-axis: 0.01 ° Counter spindle, bar capacity: 32 mm Spindle speed: 7000 rpm Spindle drive power: 7.5 kW Resolution, C-axis: 0.01 ° Turret: Number of tools: 10 of which driven: 10 Chsdpfx Aou Uicyeflef Speed of the driven tools: 5`700 rpm Driven tools, power: 2.8 kW Tool carrier: Number of tools: 4 Of which driven: 3 Speed of the driven tools: 6'000 rpm Weight and dimensions: Weight: 3800 kg Dimensions: 2700 x 1400 x 2400 mm SCOPE OF OFFER U.A: (list not exhaustive) Control system: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson transformer High pressure pump Parts conveyor Chip conveyor Exact scope of supply according to photo gallery We assume no liability for the correctness, completeness and up-to-dateness of the information.

Condition: used, Year of construction: 2008, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 300 mm, Visio 500 optical/tactile 3D measuring machine. Travel range: 453 (400 X, 500 Y, 300 Z). Measuring software: PC-DMIS CAD Version 2015. Probe change rack with 6 positions, equipped with 2 TESASTAR MP modules in total. Silent PC Big Tower with Windows 7 (fully installed and operational). Camera with 200x optical zoom featuring ring light/coaxial light and transmitted light (diascopic). All functions fully operational. Y-axis has minor scratches, which have been polished. This does not affect functionality or accuracy. Cjdjiyymrspfx Aflshf

Year of construction: 1979, condition: ready for operation (used), Max. grinding diameter: 300mm, Max. grinding length: 1950mm, Max. workpiece length: 2000mm Csdpfehq Uigjx Afljhf Max Feed rate 1 – 30 m/min. Coolant supply 100 l/min Inf. variable speed range 2.000 – 6.000 RPM. Spindle 88 mm Centers height 150 mm Grinding wheels 100 – 250 mm Spindle power 3,5 kW Grinder Power 15 kW – 380 V – 50 Hz