Column drilling machine

Maxion UNIMAX 3

Condition: new, Modern, precision pillar drilling machine based on the proven UNIMAX 3 concept, featuring stepless feed drive, automatic tool ejector, and series-standard chip breakage control. The digital display shows feed rate, speed, and drilling depth. Reversible switch for right/left rotation. Emergency stop button. Full motor protection. Pre-configured machine with special equipment including a threading unit, single-cut function, and LED lamp. Normal drilling capacity in E 335: 30 mm Threading capacity: M 20 Spindle: MK 3 Hfedpfxef Ey Aus Af Hsi Feed rate steplessly adjustable in the range: 30 - 400 mm/min Drilling depth programmable: 125 mm Overhang: 260 mm Distance spindle/table: 90 to 840 mm Table surface: 500 x 365 mm Column diameter: 110 mm Overall height: 1,900 mm Weight: 280 kg Motor with pole change: 0.8/1.5 kW Spindle speeds steplessly adjustable: Drilling range A: 80 - 1,440 rpm Drilling range B: 180 - 3,200 rpm Pre-configured machine including special equipment: - Threading unit - Single-cut function - LED lamp

Condition: new, bore capacity in steel (diameter) 25.0 mm throat 180 mm bore stroke 80.0 mm morse taper 2 MK turning speeds 180 - 2270 U/min table-size 305 x 305 mm swivelling +/- 45 Grad T-slots 16.0 mm column diameter 72.0 mm voltage 400 V total power requirement 1.10 kW weight 57.0 kg range L-W-H 400 x 630 x 990 mm scope of delivery - Keyless chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 2 / B 18 Hedpfx Afjxaa The Hsfi - Digital quill stroke display - machine light - Right-left rotation - protective cover - Height-adjustable protective cover - T-nuts - operating tool

Condition: new, Spindle: MK 3 Continuous drilling capacity: 25 mm Normal drilling capacity: 30 mm Thread cutting capacity: M 20 Drilling depth: 125 mm Overhang: 260 mm Distance spindle/table: 90 to 840 mm Table area: 500 x 365 mm Column diameter: 110 mm Overall height: 1,855 mm Weight: 250 kg Motor with pole switching: 0.8/1.5 kW Spindle speeds, stepless Range A: 80 - 1,440 min-1 Range B: 180 - 3,200 min-1 Hfsdpob Eli Hefx Af Hei Digital display for speed, standard.

Condition: used, Spindle Speed 80-3200 U/min. 30 mm Hjdpozdu Uuefx Af Hefi 25 mm table surface area 500x365 mm bore depth 125 mm throat 260 mm MK 3 distance spindle /table 90-840 mm T-slot - width 14 mm column diameter 110 mm weight of the machine ca. 270 kg

Condition: used, Year of construction: 2003, Technical details: bore capacity in steel (diameter): 25 mm throat: 255 mm bore stroke: 140 mm spindle taper MT: MK 3 spindle speed:: 105 - 2980 / 8step U/min Distance spindle/table max.: min.: 350 / max.: 950 mm table clamping surface:: 420 x 270 mm table rotating: 360 ° table swivable approx.: 30° links / rechts drill table adjustment: 600 manuell mm Hodpfxsu Idhyj Af Hefi column diameter: 100 mm current- max.: 400 V / 50 Hz A total power requirement: 0,9 kW weight of the machine ca.: 180 kg dimension machine xH: 0,6 x 0,5 x 1,8 m Equipment: Röhm quick-action chuck 3 - 16mm Switchover for clockwise/anticlockwise rotation for thread cutting *

Condition: good (used), Year of construction: 1998, functionality: fully functional, operating hours: 150 h, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 35 mm, spindle mount: MK 3, drilling depth: 200 mm, height adjustment type: mechanical, actuation type: manual, rotational speed (max.): 3,200 rpm, rotational speed (min.): 80 rpm, Powerful, precise drilling machine with a wide range of applications. Table adjustment via rack and pinion. Reversible switch for clockwise/counterclockwise rotation, digital speed display, prepared for milling attachment. Accessories: precision quick-change vise, clamping width 145mm, jaw width 125mm, angular surface 90° for vertical clamping. Hjdpezcfphsfx Af Hofi Used very little, as it was only used for small workshop prototype construction and test drilling with special tools; business closed due to retirement. Collection is possible in 85521 Ottobrunn. Technical data UNIMAX 3 Continuous drilling capacity in E335 3 - 25 mm Normal drilling capacity 30 mm Threading capacity M 4 - M 20 Spindle MK 3 Drilling depth 125 mm Overhang 260 mm Spindle / table 90 - 840 mm Table surface 550 x 400mm T-slot width 14 mm Column diameter 110 mm Overall height 1,855 mm Weight 225 kg Motor, pole-reversible 0.8 / 1.5 kW Power connection 400 V / 50 Hz Spindle speeds, stepless Range A 80 - 1,440 rpm Range B 180 - 3,200 rpm Standard packaging D - 220x74x125 cm

Condition: new, Column drill press Manufacturer: MAXION Model: UNIMAX 3 Condition: New machine Spindle speed (continuously variable): Range A: 80 - 1,440 rpm Range B: 180 - 3,200 rpm Normal drilling capacity: 30 mm Standard equipment includes: - Full motor protection - Reversing switch (right/left rotation) - Digital speed display - Table adjustment via rack and pinion - Drill guard - Emergency stop button - Operating manual Hfsdpfob Hl Irjx Af Hji

Condition: good (used), Centre height: 125 mm Distance between centres: 800 mm Max. turning diameter over bed/over slide: 280/245 mm Spindle mount, thread according to DIN 800 Spindle bore: 24 mm Infinitely variable spindle speeds: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 inch threads: 4 - 112 TPI Electrical connection: 380 V, 0.7/1.4 kW Required space: Hodpfeyu R H Njx Af Hofi Approx. weight: 500 kg

Condition: new, Column drilling machine Manufacturer: MAXION Model: UNIMAX 3 TAP Condition: New machine Spindle speed (continuously variable): Range A: 80 - 1,440 rpm Range B: 180 - 3,200 rpm Normal drilling capacity: 30 mm Standard equipment: - Continuously variable speed control - Digital display for speed - Digital display for drilling depth - Thread cutting device Hfedpfsd Hrhvex Af Hji - LED machine light - Automatic tool ejector - Operating manual

Condition: new, Column drilling machine Manufacturer: MAXION Model: UNIMAX 3 AVG Condition: New machine Spindle speed (stepless): Range A: 80 - 1,440 rpm Range B: 180 - 3,200 rpm Normal drilling capacity: 30 mm Standard equipment: - Stepless feed rate for drilling - Stepless speed control - Digital display for speed, feed rate, and drilling depth - Automatic tool ejector - Operating manual Hfedpfxsbrfmks Af Hji with the following options: - Thread cutting device

Condition: new, Year of construction: 2026, machine/vehicle number: 2103 XXXXXX, The FPS 300M, heiress of the DECKEL FP1. Through our many years of experience in service, we decided to develop and produce our own milling machines. The FPS 300M is a conventional milling machine perfect for training and production. Control 3-axis - FPS Active - digital display Speed Hedsh I Nqwepfx Af Hefi 40 - 2000 rpm geometrically stepped direct gearbox with 16 gear steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,5 m/min quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Axes X/Y/Z 300/160/340 mm Table Rigid angular table 600x210mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 Hfedpfx Afjfg U Tps Hji throat 260 mm bore stroke 125 mm spindle taper MK 3 spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 feed range - spindle 0 mm/U spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: Hfjdpfsfg U Tnsx Af Hji - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: used, Year of construction: 1999, throat 290 mm bore stroke 160 mm Hedpfxew En D Uo Af Hsfi total power requirement 1,9 kW Description to follow!

Condition: good (used), Year of construction: 2005, Offer 26119 Technical data: - Drilling capacity in steel ST 60: 30 mm - Drill spindle taper: MK 3 - Drill spindle stroke: 125 mm - Infinitely variable drill spindle speeds: 80 – 3200 rpm - Thread cutting capability via reversible rotation up to M 20 - Throat: 260 mm - Max. distance table to spindle: 825 mm Hfodpjy D Nxqefx Af Hei - Table with 2 T-slots: 500 x 360 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.8 / 1.5 kW - Space requirement approx.: W 500 x H 1900 x D 950 mm - Weight approx.: 230 kg - Cross table with handwheels