Cutter metallography laboratory

METKON Servocut 302

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm speed: approx. 25 m/min working direction: any Iodpsp E Eglofx Abpeif work roll diameter: 120 mm barrel length: 150 mm backup rolls: backup block/chain

Year of construction: 1988, condition: good (used), machine/vehicle number: D 05103, Item No. 13439 Technical data: - Polishing wheel / grinding wheel dimensions: approx. 300 x 40 x 76 mm - Grinding belt dimensions: approx. 3500 x 50 mm - Contact wheel dimensions: 400 x 50 mm - Drive speed: 1450 rpm - Drive: 400 V / 1.8 kW Iiodpfx Absk D Ewgepjf - Space requirement: approx. W 1100 x H 2450 x D 800 mm - Weight: approx. 300 kg

Condition: excellent (used), Year of construction: 2018, Technical data: Operating voltage: 400V AC Maximum fuse rating: 16A Frequency: 50/60Hz Electrical connection power: 4.5kW Temperature range: +12°C above ambient temperature to 300°C Spatial temperature deviation at 150 °C: ± 2.0K Temporal temperature deviation at 150 °C: ± 0.6K Heating time to 150 °C: 25 min Recovery time after 30 s door opening at 150 °C: 6 min Air exchange rate at 100 °C: 5x/h Internal volume: 741 l Maximum load per insert: 45 kg Maximum total load: 315 kg Energy consumption at 150 °C: 800 Wh/h Maximum number of inserts: 16 External dimensions: Width: 1,165 mm Height: 1,590 mm Depth: 870 mm Internal dimensions: Width: 1,000 mm Isdpfx Aboxzukkjpjif Height: 1,300 mm Depth: 570 mm Important note: The wheels are installed/included.

Condition: new, Year of construction: 2024, Automatic length measuring and positioning system for all STROMAB crosscut saws, as well as similar machines from other manufacturers. It serves both as a stop and for workpiece positioning. Consists of: Aluminium profile 105 x 90 mm, anodized Toothed belt drive 32 mm, reinforced with steel wire Stepper motor 6 Nm, multi-voltage 115 - 230 V, 50/60 Hz Repeatability +/- 0.1 mm Positioning speed 60 m/min SMART 7 Control Unit with 7-inch touch screen Absolute and incremental processing mode 8 pre-set standard values 2 software versions with different optimization levels available optionally. Iiodpfxsxrauco Abpof ZM 415 – Usable working length 4,500 mm ZA333 – Roller table 4,500 x 280 mm, RD 32 mm ZA341 – Front support 4,500 x 260 mm ZA373 – Locking cable for customer’s own crosscut saw

Year of construction: 2007, condition: good (used), machine/vehicle number: 1380-1207, >with Siemens Sinumerik Panel Control >with chip conveyor >control panel >electric cabinet >capacity through spindle 60 mm Ijdpfxem Nb Rij Abpeif >max. piece length 340 mm

Year of construction: 2022, condition: ready for operation (used), Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection possible by arrangement. Iiedpfx Aboxy R Ezjpef

Year of construction: 2019, condition: ready for operation (used), Pressing force: 4000kN, stroke: 300mm, table dimensions: 3100x1400mm, controls: Siemens S7, length: 4560mm, width: 2045mm, height: 4605mm, weight: 65t, with transfer system and soud-proof cabin. Iiodpfxslyr Adj Abpjf

Condition: like new (used), Year of construction: 2026, operating hours: 50 h, functionality: fully functional, turning length: 330 mm, turning diameter: 350 mm, spindle speed (max.): 6,000 rpm, travel distance Z-axis: 330 mm, spindle motor power: 15,000 W, rotational speed (max.): 6,000 rpm, overall weight: 3,200 kg, swing diameter over bed slide: 600 mm, bar passage: 65 mm, bar diameter (max.): 65 mm, We are offering this as-new DN Solutions Lynx 2100 CNC lathe Lynx 2100 GT2100 GT2600, year of manufacture 2026. Ijdpfxeyzbdgs Abpsif Listing Title: DN Solutions (Doosan) Lynx 2100 – As-new condition (only 50 operating hours!) Description: We are offering a DN Solutions (Doosan) Lynx 2100 CNC lathe in as-new condition. The machine was purchased for a specific project and has seen minimal use. It is currently in showroom-like condition with less than 50 operating hours. Condition: As-new, no signs of wear, fully functional Availability: Immediately available Key advantage: Avoid long delivery times and secure a machine in new-machine quality right away. Technical Data: Control: Fanuc i-Series Swing diameter over bed: 600 mm Maximum turning diameter: 350 mm Maximum turning length: 330 mm Bar capacity: 51 mm / 65 mm Spindle speed: 6,000 rpm Number of tool stations: 12 Main drive power: 15 kW Machine weight: approx. 3,200 kg If you have any questions or need further information, feel free to send us a message or call us.

Condition: used, Year of construction: 2006, machine/vehicle number: M 91317, Decoiler Coil weight: 5 ton Material width: 80 - 500 mm Coil exterior diameter: 1800 mm Expansion range: 508 mm Speed: 50 m / min Leveller / Straightener Material width : 50 - 500 mm Isdpfx Asuqd Udobpsif Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 65 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 150 mm Material thickness: 1 - 8 mm Feeding speed: 50 m / min Feeding length: 0,1 - 9999,9 mm Standard configuration Coil loading unitStroke 500 mm Load capacity 5000 kg Material width max. 500 mm

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, year of last overhaul: 2026, We are offering this very well-maintained TRUMPF TruLaser Weld 1000 laser welding machine, year of manufacture 2023, with low operating hours. The machine has been serviced annually by TRUMPF, with the most recent service carried out in April 2026. The machine is powered on and fully equipped with two rotary axes. Programming is performed directly on the machine, without additional software required. The machine is still in production. Available for delivery in August 2026. Manufacturer: TRUMPF Model: TruLaser Weld 1000 Year of manufacture: 2023 Ijdsy I Ak Ujpfx Abpeif If you have any questions or need further information, please feel free to send us a message or give us a call.