Welding machine

Mic O Mat Micomat 250

Condition: used, Year of construction: 1999, serial number 97665 welding power 280 kVA Iasdpfx Aaeuxfzpodsn Baunorm EN: 60974-1 / EN Brenner / Schlauchpaket

Condition: new, current intensivity 200 A capacity at 100% load 150 A 230 V weight of the machine ca. 9,0 t Iajdpfx Aaewrzrxsdjn dimensions of the machine ca. 0,46 x 0,15 x 0,32 m TIG welding system - New - 3m hose package - Additional 8m hose package - Ground cable - Gas connection hose - Documentation

Condition: used, Technical details: welding current - continuous: 400 A protection class: IP21 total power requirement: 23,2 kVA kVA weight of the machine approx.: 128 kg dimensions of machine: 1,3 x 0,5 x 0,9 m Ijdpfxju Nwbis Aadsan - E-welding and TIG - DC welding current - Cooling mode AF -control switching 2/4 cycle spot welding, stepless The following components have been replaced by NEW ones: -hose package 4.0 meters -ground clamp and ground cable 4,0 meter -pressure reducer *

Condition: ready for operation (used), Year of construction: 2008, TIG welding system Adjustment range: 10 - 320 A Adjustment range for electrode: 25 - 280 A Duty cycle at 60/100%: 320/260 A Electrical connection, mains voltage: 400 V Weight: 290 kg Space required: 1200 x 600 x 950 mm Iasdpfx Aaewx H Aiedjn

Condition: used, Technical details: Iodsu Nwc Hjpfx Aadoan capacity at 100% ED: 400 A capacity: 60% ED = 500 A welding current: Gleichstrom V weight of the machine approx.: 230 kg capacity: 21 kVA Welding rectifier MIG / MAG Cooling type F Protection class IP 23 insulation class F incl. wire feed device, feed rate 0,5 - 20 m/min Ground cable/pliers Hose package 4 meters new *

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-2000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm Ijdpjthit Esfx Aadoan - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Year of construction: 2012, condition: ready for operation (used), A Dalex welding press/projection welding machine including Sortimat (ATS) feeding unit is available. Rated power at 50% duty cycle: 100kVA, max. welding power: 455kVA, open-circuit voltage: 8.88V, max. short-circuit current: 67kA, cooling water flow rate: 10l/min, electrode force min./max.: 120daN/720daN, single-stroke cylinder: 100mm, machine throat depth: 250mm, stop range: 148mm-400mm, belt diameter: 260mm. Weight: approx. 850kg, control system: MPS 200 multi R1. Including sorting and feeding unit, flow monitor, adjustment device and return stroke monitoring. Documentation available. An on-site inspection is possible. Iedpfoxr Nwasx Aadsan

Condition: used, ID43744 Welding machines Iasdpfx Aaowhd Nfsden Brand: Invertec Type: V270T Lincoln Electric Including all necessary cables

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W @ 9400 nm / 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Scale): 1% Full Scale: 1.0 ms 10% Full Scale: 4.5 ms Accuracy Repeatability (RMS): < 4 µrad Maximum Position Resolution: 18 bit for XY, 16 bit for Z* Non-linearity: < 2.1 mrad / 44° 8-Hour Drift (after 30 min warmup): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Supply Voltage: (48±2) V DC, up to 10 A each (20 A peak) Mechanics Scan Axes: 3-axis system with integrated varioSCAN Housing Versions: Scan head Connector Positions: Opposite beam exit Weight (without lens, standard housing): 35 kg Dimensions (L x W x H, standard housing, with varioSCAN): (433 x 268 x 266) mm³ Beam Offset: 72.72 mm Ijdpfx Aexp Iw Hoadean Other Features Water Cooling: Yes Air Cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) Shipping & Collection: Secure pallet shipping (upon arrangement) or local pickup possible. Feel free to contact us by phone for further questions.

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC Iaodpfx Asxrb Tgoadsn WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407