CNC portal plasma cutting machine

Microstep SPL-P 12001.20

Year of construction: 2009, condition: good (used), Load capacity: 30 t Fine lift Ffjdpfx Aeqiz N Rea Esw Lifting height 9 meters

Condition: good (used), Year of construction: 1998, Column jib crane, overhead crane, workstation crane -Manufacturer: VETTER, Column jib crane type TS10-7.0, lifting capacity 1000 kg -Note: with test book -with chain hoist: Vetter type SIE 6F, year of manufacture 1998 -Lifting speed: 5.0/1.25 m/min -Drive system: yes -Swivel drive: yes -Projection: 7020 mm Fsdpfx Aaox R U Azj Esfw -Total height: 3870 mm -Hook height: 2960 mm -Swivel range: 360° -Transport dimensions: 1460/7570/H2280 mm -Empty weight: 1250 kg

Condition: good (used), Vertical Turning Lathe SC33 CNC Manufacturer: TITAN (Romania) YOM: 1986 Complete revision of the machine in 2005 Main technical data: Ffsdpfx Aasw Eplaj Eew CNC Siemens 802D Faceplate diameter: 3000mm Max. turning diameter: 3300mm Max. working height: 3000mm Max. workpiece weight: 18000kg Table speed range: 1.02-92 RPM Working feed range: 0.05-5 mm/rev. Main motor power: 55 kW Overall dimensions: 5600 x 5300 x 5400 mm Weight: 47350 kg The machine is under power.

Condition: excellent (used), Year of construction: 2012, Voortman V613 / VB1050 Split System CNC Drilling / Sawing Line – Year 2012. Rotating Spindle. Automatic Tool changer. 24 metres In-Feed to VB1050. 24 metres Out-Feed to V613 CNC Drilling line. 24 metres Out-Feed. Roller Feed. Ffedpfx Aaev U Ea Ho Esw VACAM CNC Control. Short piece removal.

Condition: good (used), Year of construction: 2012, CNC gantry plasma cutting machine Manufacturer: Microstep Model: SPL PAA 9001.25 Year of manufacture: 2012 CNC control Working area: 2,500 x 9,000 mm 1 plasma torch with Kjellberg HiFocus 280i power source 2 oxy-fuel torches (propane) Beuting oscillating conveyor table Fsdpju U Hm Asfx Aa Eofw Donaldson DFPRO12 filtration system for outdoor installation 25226ä

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction). Fedpfxjtp Dhpj Aa Eefw  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: as good as new (ex-display), Year of construction: 2023, Container turning device 10 tons load capacity Speed infinitely variable Hand and foot remote control Ffsdpfed Nmx Tjx Aa Eow Diameter from 320mm to 2800mm Roller diameter 300mm speed 6 - 60 m./h power 2 x 0,55 KW

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM 4-roller bending machine: Fsdpfx Aouddcaja Eefw Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 70,000 h, control type: CNC control, degree of automation: semi-automatic, laser type: CO₂ laser, laser source manufacturer: Mitsubishi, laser hours: 14,000 h, laser power: 4,000 W, laser wavelength: 10,600 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, table length: 3,050 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,020 mm, travel distance Y-axis: 1,520 mm, travel distance Z-axis: 50 mm, power: 4 kW (5.44 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 12,000 kg, total length: 12,000 mm, total width: 3,000 mm, total height: 2,500 mm, year of last overhaul: 2023, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Machine: AMADA LC-3015 X1 NT Laser resonator: ML40CFX / 4KW Extraction system: Herding - Delta Comp 1500-6/9 SB Cooler: Riedel - PC 1001.1MS5.I Operating hours: see picture Last maintenance 10/2023 Fsdpfxeu Stk Es Aa Ejfw

Condition: excellent (used), Year of construction: 2008, operating hours: 9,000 h, laser power: 4,400 W, Used very clean Bystronic Bystar 3015 4.4kW for sale / flat bed industrial cnc laser for sale Bystronic ByStar 3015 4.4kW BRAND: BYSTRONIC YEAR: 2008 MODEL: ByStar 3015 APPLICATION TYPE: LASER CUTTING LOCATION: UNITED KINGDOM MACHINE TYPE: LASER CUTTING MACHINES (CO2) Fully Serviced and Well Maintained CONTROL UNIT BRAND: BYSTRONIC Technical Information Ffedpfx Asr Hcmrsa Esw BRAND: BYSTRONIC LASERPOWER: 4.4KW / 4400 watts LASER TYPE: CO2 LASER BRAND: BYLASER 4400 MOVEMENT X-AXIS MOVEMENT: 3000 MM Y-AXIS MOVEMENT: 1500 MM Machines hours: Cut hours: 9,000 ADDITIONAL EQUIPMENT – BYPOS – CUT-CONTROL – 2 CUTTING HEADS (5″, 7.5″)