Thickness planer

Minimax Formula SP1

Condition: reconditioned (used), Year of construction: 2010, Voltage 400V 3~ 50Hz 7.22kW Pedpfxoyf I T Uo Am Tjgp Control panel with LCD display and keypad Jointing unit with 2 counter-rotating diamond cutters Corner rounding unit for edge faces Manual unit adjustment Edge thickness 0.4-5.0 mm (optionally 8 mm) Workpiece height 8-60mm Feed speed 11 m/min 3 free slots for finishing units Edge feed for coil and strip material Scraper knife

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical data: Edge banding thickness: max. 8-55 mm Edge banding with rounding unit: max. 45 mm Strip edge banding thickness: 0.4 - 8 mm Roller edge thickness: 0.4 - 3 mm Feed rate: 12 m/min Incl. rotatable control panel HF joining unit, 2-motor Incl. quick-heating tank, interchangeable, Teflon-coated Pgodpfx Aew Nadgsm Top Incl. electronic positioning of the pressure rollers Incl. swiveling double miter saw unit Incl. flush trimming unit Incl. CNC-controlled chamfering, radius, and corner copying unit with nesting package Incl. radius pull blade with nesting package Incl. flat pull blade Incl. groove unit Incl. scraping unit Incl. spray unit Availability: short notice Location: Flörsheim

Condition: used, Thickness planer Panhans 426 Planing width 630 mm Planing height 250 mm Electric height adjustment via positioning control TERSA safety planing cutterhead Table with four-point guidance Main motor 7.5 kW Feed rate 7 + 14 m/min Articulated pressure beam made of solid aluminum Machine is WORKSHOP TESTED and in TOP CONDITION Machine is connected and ready for demonstration at the showroom Available from stock in Lieboch Podpfxey Tu R Ds Am Tsgp

Condition: used, Technical data: Max planing width: 520 mm Max planing height: 250 mm Cutterhead diameter: 110 mm Pgedpfxsx Hgdco Am Top Number of knives: 4 4 feed speeds Electric height adjustment Power supply: 400 V Motor power: 4 kW Overall dimensions: Length: 1000 mm Width: 1080 mm Height: 1080 mm

Condition: used, Holz Her Sprint 1317 Heavy-duty version – edge thickness 0.4 – 8 mm SPS (programmable logic controller) screen control Infeed guide rail controlled by SPS Pre-milling unit for applying before the gluing section Fully automatic edge magazine for coil and strip material Glue application station: cartridges + PU gluing Glue application using nozzle technology Workpiece height 6-50 mm Glue height adjustment Pressing unit, pneumatic Trimming unit 1918 for coil and strip material up to 8 mm edge thickness with pneumatic adjustment for 0-10° angled trimming Milling unit 1942 MOT2 flush trimming 8 mm, radius milling – chamfer milling – 15° Pull blade unit for chamfers and radii with 2 pull blade holders Shaping milling unit 1832 for rounding corners up to edge thickness 3 mm in a single pass pneumatic infeed and outfeed Surface pull blade unit – finishing Machine is FULLY FUNCTIONAL and in GOOD CONDITION Sold on behalf of a carpentry workshop/trainer Pgodszkr A Aspfx Am Tep Availability: mid-July 2026 Ex-works, special price, net €8,500.00

Condition: used, Holz Her STREAMER 1057 XL FÜ + PU Pjdpfx Aezcau Esm Tjgp Edge thickness 0.4 - 6 mm Modern control system with selector switch for adjusting the units Fully automatic edge magazine for roll and strip material GLU-JET adhesive application station, cartridges + PU adhesive Adhesive application using nozzle technology Sensor-controlled nozzle Workpiece height 6-60 mm Automatic adhesive height adjustment High-quality 3-roller pressure unit, 1st roller motorized Trimming unit, pneumatically controlled for roll and strip material up to 6 mm edge thickness With pneumatic adjustment of the trimming saw angle from 0-10° Routing unit, flush trimming 6 mm, radius routing - chamfer routing - 15° Corner copying unit - 3 mm edge thickness Scraping unit for chamfers and radii with 2 scraping blade holders Surface scraping unit - finishing Buffing unit Spray device in the infeed and outfeed area, as well as for PU Machine with all processing tools Machine is WORKSHOP TESTED From a craft business First delivery 2019 Available from stock in Lieboch

Condition: used, Year of construction: 2011, Usable working width: 520 mm Thickness table dimensions: 520 x 900 mm Max. working height: 300 mm Min. working height: 3.5 mm Min. workpiece length: 220 mm Max. material removal: 8 mm Cutterhead diameter (number of cutters): 120 mm (4 pieces) Cutterhead speed: 4500 rpm Feed rate: 5-8-12-18 m/min Motor power: 7 kW Dust extraction port diameter: 150 mm Dust extraction volume: 1300 m³/h Pedpfezimbdex Am Tjgp Weight: approx. 680 kg Dimensions: 1150 x 1100 x 1250 mm Storage location: Garbsen

Year of construction: 2026, condition: new, New machine Year of manufacture: 2026 The space-saving, swiveling vacuum press with a pressing area of 3500 mm x 1420 mm. Technical standard equipment of the vacuum press: Unless otherwise agreed, the vacuum press is powder-coated in RAL 7012 and RAL 7035 color shades. Custom colors are available upon request and must be clarified in advance, which may result in additional charges. Welded table construction designed for professional use, mounted on a swiveling chassis cart, standing on 4 swivel castors, surface load capacity of 150 kg. When not in use, the machine can be swiveled for space-saving storage and locked in place, reducing the required depth to only 800 mm. The table surface consists of a 22 mm thick HPL-MDF board, with a slotted vacuum distribution plate made from MDF covering the pressing area. The membrane frame is supported by 2 gas pressure springs mounted on the sides of the machine. A natural rubber membrane with 2 mm thickness, 780% elongation capability, and temperature resistance up to 70°C is installed, attached by a clamping system for efficient membrane changes. The all-around sealing of the press area is provided by a sealing profile installed in the membrane frame. Oil-circulated vacuum pump with a suction capacity of 40 m³/h and two vacuum tanks with a total capacity of 200 liters. Evacuation and ventilation of the press area is managed via a 3-way ball valve located at the front of the machine. The machine is delivered pre-assembled on a pallet. Please note that unloading requires a forklift with sufficient lifting capacity and fork length. Additionally, it is possible to book initial setup and a quick instruction by one of our staff members. If desired, we are happy to provide you with a separate offer for this service. Summary of key data: - Welded frame construction - Highly flexible natural rubber membrane, thickness: 2 mm, elongation: 780%, very high recovery capability, suitable for temperatures up to 70°C - MDF vacuum distribution plate - Digital vacuum control VAK-CONTROL 1 with auto shut-off - Vacuum pump: 40 m³/h, oil lubricated - Max. vacuum: -0.99 bar - Max. pressing pressure up to 9.9 t/m² - Connected load: 1.40 kW (400 Volt) - Vacuum tank: 200 liters - 4 swivel castors with locks - Additional 13 mm vacuum connection - Pressing area: 3500 x 1420 mm - Table height to vacuum distributor plate: approx. 895 mm - Machine height closed: approx. 960 mm - Machine height closed with cover plate: approx. 1030 mm - Installation dimensions, operational: 3790 x 1700 x 2150 mm (LxWxH) - Installation dimensions, swiveled: 3790 x 800 x 1750 mm (LxWxH) Commodity code: 84659400 Net weight: 570 kg Gross weight: 660 kg Includes cover plate 3514 With a cover plate, you not only protect your membrane from UV radiation, but also convert your mobile-base vacuum press into a mobile worktable that can be used flexibly in your company. - Coated cover plate - Solid welded steel frame - Opening support by gas pressure springs Commodity code: 84669280 Net weight: 105 kg Pjdpfx Aeznph Rem Tsgp Gross weight: 105 kg The cover plate is only available in combination with a vacuum press.

Condition: used, Technical specifications: Max. planing width: 520 mm Max. planing height: 300 mm Cutter head speed: 5000 rpm Number of knives: 4 Number of rollers in the table: 1 Feed rate: continuously adjustable Electric lifting mechanism Power supply: 400 V Motor power: 4 kW Pgedpfxjzilrbj Am Tjp Overall dimensions: Length: 1240 mm Width: 1090 mm Height: 1210 mm

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 0-200-03-9040, functionality: fully functional, Product Description: We are selling a well-maintained, heavy-duty HOMAG OPTIMAT KAR 310/5/A20/S2 single-sided edge banding machine. Known for its reliability and precision, this machine is ideal for professional woodworking companies requiring high-quality edging for various materials and thicknesses. Manufacturer: HOMAG Psdpfx Amexvqqpj Togp Model: OPTIMAT KAR 310/5/A20/S2 Condition: Excellent working condition, ready for immediate use. Year of Manufacture: 2007 Working Hours: Cant see right now because power cabel is not attached. Key Technical Specifications and Features: Gluing System: FE-MA-TECH Advanced PUR 2 kg fully refurbished 2025.11.10, with 2 new glue pots. Feed Speed: 18m/min Panel Thickness: 10-60mm Edge Thickness: 0.3 - 20 mm Included Processing Units (Aggregates): Jointing/Pre-milling Unit: For perfect edge preparation. FE-MA-TECH Advanced PUR 2 kg Pressure Zone: Optimized for thick edges. End Trimming Unit (HL): Precision trimming of front and rear edge overhang. Fine Trimming Unit (MFL): Top and bottom trimming for flush or radius finish (S2 setup). Profile Scraping Unit (PN): To remove traces from trimming for a smoother surface. Buffing/Polishing Unit (SM): For a perfect, high-gloss finish. Additional Information: Service History: Service every year by Projecta OY (Estonia), 2023 - Change whole software and computer system.