Mitsubishi Electric MV2400R

Mitsubishi Electric MV2400R

Condition: excellent (used), Year of construction: 1999, CNC Lathe Fpodjx Hgl Hopfx Adcsh MAZAK SQT 200 MS Year of manufacture: 1999 Including indicated tools and sub-spindle Control: Mazatrol PC Fusion CNC 640T Technical specifications: Max. swing diameter: 525 mm Max. swing diameter over saddle: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° - 360°/0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions/5° Tool turret: Number of tool stations: 12 (freely configurable with stationary and driven tools) Turret indexing time – 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed range: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000°/min

Condition: used, Year of construction: 1992, Technical details: x-travel: 800 mm y-travel: 550 mm z-travel: 500 mm spindle taper ISO: SK 40 control: Philips 532 quill stroke vertical: 80 mm turning speed range: 0-600 und 600-4000 steples U/min feed:: 1 - 3000 mm/min. rapid traverse: 6 m/min table surface area: 1100 x 600 mm table feed: 1 - 3000 /stufenlos mm/min switched on hours: 82194 h total power requirement: 9,6 (12 kVA) kW Fjdpfx Asu Nda Eedcoph weight approx.: 4200 kg dimension machine xH: 2,9 x 2,2 x 2,5 m The machine is located in the technical department. further technical data: - vertical adjustment table (z-axis) 500mm - Headstock throat depth: min./max.: 200 / 750 mm Equipment: -coolant tank with pump -Manual control unit (hand operated) -linear measuring system Heidenhain *

Condition: excellent (used), Year of construction: 1990, MAHO MH 500W with Heidenhain TNC 320 The machine comes from a training workshop and is in very good condition. The TNC 320 offers intuitive and highly flexible operation and programming according to current industry standards. Technical specifications: - Heidenhain TNC 320 retrofit - Travel X- 500 mm, Y- 380 mm, Z- 350 mm - Spindle taper SK 40 - Vertical quill stroke 50 mm - Spindle speeds 20–3150 rpm, stepless - Feed rate 1–3000 mm/min - Rapid traverse 5 m/min - Table load capacity 250 kg - Total power requirement 11.3 kW - Machine weight approx. 2 t - Handheld control unit - Safety guard An on-site inspection/test under power is, of course, possible. We are happy to offer transport, installation, and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH, are a company specialized in: - Service - Maintenance - Overhaul - Automation Fpsdpjxw N S Isfx Adcjh of DMG machines and equipment from other renowned manufacturers. We support you throughout the entire process! From machine purchase, transport, and delivery, up to commissioning and subsequent maintenance or repair work – you can rely on us.

Condition: ready for operation (used), Year of construction: 2020, Control Unit Brand HAAS Model NGC Main Drive Number of axis 3 Movement X-Axis Movement 1270 mm Z-Axis Movement 635 mm Y-Axis Movement 508 mm This 3-axis HAAS VF-4 vertical machining center was manufactured in 2020. It features a 1270 mm X-axis, 508 mm Y-axis, and 635 mm Z-axis travel, supporting a table load up to 1588 kg. Equipped with a 20-station tool magazine, chip auger extractor, and a Renishaw OTS tool probe. Consider the opportunity to buy this HAAS VF-4 vertical machining center. Contact us for more information about this machine. Application Types Milling Fedpfjx Enh Tex Adcjph

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,792 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-3SS vertical machining center was manufactured in 2015. It features a 1,372 × 457 mm table, a maximum load of 794 kg, and a spindle speed of 12,000 rpm. The machine includes a 30+1 side-mount ATC and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information about this machine. • Electrical: • Voltage: 354 / 488 V • Phase: 3 Fsdpfxjx D I Smj Adcsph • Frequency: 50/60 Hz • Full load: 40 A • Largest load: 70 A • Short circuit interrupting capacity: 10,000 A • Short circuit current: 5,000 A RMS symmetrical • Machine hours (from control): • Power on time: 19,635 h • Cycle start time: 8,564 h • Table: • Size: 1,372 × 457 mm • Tool changer: 30+1 side-mount ATC • Control unit: Haas CNC Control

Condition: good (used), Year of construction: 2016, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: - 396.900.171.0076, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total length: 1,030 mm, The machine is in excellent condition and can be inspected under power. Fpodpfxjyit Uls Adcsh

Condition: excellent (used), Maximum machinable diameter above the bed: 575 mm Maximum machinable diameter above the slide: 525 mm Maximum machinable diameter above the small cross slide: 300 mm Distance between centers: 2000 mm Spindle passage diameter: 51 mm Number of spindle speeds: 18 Fpedswlgdyspfx Adcoh Spindle speed range: 32 to 2500 rpm Bed width: 400 mm Maximum cross slide travel: 305 mm Maximum upper slide travel: 140 mm Maximum tailstock travel: 150 mm Overall dimensions: 3405 x 1175 x 1345 mm Machine weight: 2200 kg

Condition: new, ZEATZ NC rotary tables, PHV series – available for short-term delivery The ZEATZ NC rotary tables of the PHV series stand for the highest precision, stability, and flexibility in modern machining. Ideal for positioning, turning, and simultaneous machining in a wide range of applications. Your advantages at a glance: ✔ Integration into existing machines (HEIDENHAIN / SIEMENS) ✔ Service & technical support directly from JMT ✔ Individual designs and customer-specific solutions ✔ High load capacity for heavy workpieces Why ZEATZ: ZEATZ represents innovative NC rotary table solutions with the highest precision and reliability. Thanks to their robust design, backlash-free drive systems, and state-of-the-art control technology, these rotary tables are ideally suited for demanding machining processes. Technical features: Working position: Vertical / Horizontal Applications: Precise positioning, stepless rotation, and interpolating machining in a single setup Sizes: Table diameter: 500 / 600 / 800 / 1,000 / 1,200 mm (optional, also with square clamping surfaces) Max. workpiece weight: Horizontal: up to 20,000 kg Vertical: up to 4,000 kg Positioning accuracy: ± 3" Integration: Compatible with HEIDENHAIN and SIEMENS controls Your advantages as a JMT customer: ✔ Official distribution partner for ZEATZ in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply Fpjdpfem Tvz Dsx Adcoh ✔ Support with integration and commissioning ✔ Reference projects available in Germany Contact us – we will be happy to advise you and create a customized offer.

Year of construction: 2006, condition: ready for operation (used), A Pinacho CNC precision parallel lathe is available. Center height: 180mm, center width: 750mm-1000mm, turning diameter over guide bed/longitudinal slide/cross slide: 360mm/335mm/198mm, bed width: 250mm, bore: 42mm, speed: 4000rpm, feed X/Z: 10m/min, rapid traverse X/Z: 10m/min. Tailstock shank diameter: 58mm, tailstock shank length: 200mm, Morse taper: MK3, min. travel of moving/fixed steady rest: 10mm, max. travel of moving/fixed steady rest: 70mm/114mm, control: Fanuc 0i. Documentation available. On-site inspection is possible Fpsdpfx Adewftcvjcoh

Condition: used, FANUC Robocut C 600 iA is a wire cutting EDM designed for precision, high accuracy and reliability. Working table 600×400 mm; max workpiece 1050×820×300 mm; table load 1000 kg; travels X600 Y400 Z310 U200 V200; wire from 0.1 mm. Power supply 50 Hz 3x 400 V; total power 11 kVA; machine weight ~1500 kg; overall 1800×1600×2000 mm. Accessories: lamp, automatic wire threading, Daikin cooling unit, automatic sliding door, glass rulers X,Y, rotating spindle Hirschmann F. Enables tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Fodpfoyxprtox Adcjph