Used Wire EDMs with x-travel from 700mm for sale (10)

Year of construction: 1998, Condition: good (used), Charmilles Technologies Robofil 510 EDM machine TECHNICAL DATA Control cabinet Generator type: Isopulse Max. Ambient temperature: 30°C Software storage time: 100 hours Maximum charging time: 60 hours Disk type: 3 ½ '' Number of storable programs: 112 Dimensions: 1800 x 650 x 1000 mm Cooling air: 800 m3/h at 30°C Maximum discharge current: 45 A Graphic color screen: 14 16-bit microprocessor: 3 Machine Machine bed: polymer concrete Bslqz Usktf S Hswyowl dimensions: 2100 x 2050 x 2230 mm Weight: 3800 kg Access door dimensions: 1220 mm Workpiece Maximum dimension, workpiece: 1200 x 700 mm Maximum height of the workpiece: 400 mm Maximum load: 1000 kg Travels X-axis: 700 mm Y-axis: 400 mm Z-axis: 400 mm U-axis: 700 mm V-axis: 400 mm Measuring resolution: 0.5 μm Maximum manual speed: 15 mm/s Wire Wire diameter: 0.1 to 0.3 mm Speed: adjustable from 0 to 15 m/min Mechanical tension: adjustable from 0 to 30 N Clearance angle: adjustable from 0° to 30 Maximum height for threading: 300 mm Automatic threading (2 mm): Yes Automatic rethreading: Yes Bobbins: K125 (4 kg) / K160 (8 kg) / K200 (16 kg) Dielectric Deionization: Resin mixture, 20 l Tank type: waterproof steel sheet, welded dimensions: 2030 x 1420 mm Capacity: 450 l Filter system: 10 Flushing, pressure: 0 to 11,5 bar External connections Power Mains frequency: 50 Hz Cos. PHI: 0.8 Three-phase input voltage: 380 V / 400 V Permissible fluctuations: +10% to -15 Allowable micro-interruptions: 4 ms Connected load: 10 KVA Inrush current: 10 KVA Cooling Minimum pressure difference between inlet and outlet of the cooling source: 2 bars Maximum pressure at inlet: 5 bars Maximum flow rate: 25 l/min Air Pressure range: From 6 to 7 bars Capacity: 1 l/min General data Permissible ambient temperature: 20°C +- 1° C Permissible air humidity: 40 to 80 Noise level: 72 dB We do not assume any liability for the correctness, completeness and topicality of the information.

Condition: like new (used), Year: 2023 Bolqevgd Rzoz Uwyowl Machine travels: 800 x 450 x 640 x 360mm (X * Y * Z * W) Machine Dimension: 1910 x 1990 x 2240mm (2600mm Max) (W x D x H) Machine Weight: 1700Kg Max Weight for workpiece: 500Kg 2 Axis indexer with 3 jaw chuck Usable Electrode Diameter: ø 0.1 ~ ø 6.0mm Usable Electrode Length: 200 ~ 600mm, Drilling depth : 360mm Maximum Power: 3ø 415V 50㎐(Changeable) Max Allowable Current: 30A Rated Power Capacity: 5KVA Pneumatic Pressure Required: 5 bar Self-contained water system with filtration and deionisation system with sensor CNC programmable, from DXF or CNC auto hole patterns for PCD, Rows, Square, or GM code Auto routines for, set up, hole finding, simple programming

Condition: good (used), Year of construction: 2003, Functionality: fully functional, travel distance X-axis: 770 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 1,100 mm, workpiece length (max.): 850 mm, net weight: 5,200 kg, Selling our Sodick AQ750L wire EDM machine Machine is in good condition, being sold due to new purchase. YEAR OF MANUFACTURE 2003 Inspection under power possible, test cuts also possible. Bwelqzsvbyive Uwysl Accuracy of the machine is good. Due to the linear drives, the machine is very accurate even after years. The many ceramic parts also contribute to the accuracy in terms of thermal expansion. Travels U770mm V 520mm

Condition: used, Year of construction: 2008, Functionality: fully functional, The machine is in good general condition and is used daily. It can therefore be viewed with the power on. Please let me know if you have any questions. Bslqz Uwsv Id Szjyswl

Condition: excellent (used), Year of construction: 2020, operating hours: 3,339 h, Functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, total height: 2,645 mm, total length: 2,870 mm, total width: 2,670 mm, workpiece height (max.): 510 mm, workpiece width (max.): 1,450 mm, workpiece length (max.): 950 mm, overall weight: 6,300 kg, For sale is a CUT P 800 wire erosion machine incl. options: Wire guides 0.25 mm AC-Setup 3D Bjlou Ic Nioqz Uwyjwl Taper-Expert © 0.25 mm Horizontal manual annealing Additional M-functions Signal light - operating status display Automatic central lubrication

Condition: refurbished (used), Year of construction: 2014, Functionality: fully functional, GF AgieCharmilles CUT 400 Sp Year of manufacture 2014 Control HMI 1 Travel paths (X / Y / Z): 800 x 550 x 510 mm Travel paths (U / V): 800 x 550 mm Max. taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface: Ra 0.2 µm Bwjlovt R Dboqz Uwyol Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire roll with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is already in our warehouse and will be cleaned, overhauled and tested for all functions after receipt of the order. Optional: - Commissioning of the machine in your company - On-site training - Cooling unit - Transport - Clamping bar set

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, total height: 2,783 mm, total length: 3,574 mm, total width: 3,143 mm, workpiece height (max.): 590 mm, table width: 875 mm, overall weight: 5,700 kg, table length: 1,110 mm, For sale: Mitsubishi FA30V Advanced with Z600 specification, allowing a cutting height of up to 600 mm. The machine was running flawlessly until the end and is in excellent condition. A viewing at our location is possible; however, the machine is currently not powered. In addition to the 600 mm cutting height, the machine is equipped with a device for large wire spools. Boljvv T D Njqz Uwyjwl For sale: Mitsubishi FA30V Advanced with Z600 specification, allowing a cutting height of up to 600 mm. The machine was running flawlessly until the end and is in excellent condition. A viewing at our location is possible; however, the machine is currently not powered. In addition to the 600 mm cutting height, the machine is equipped with a device for large wire spools.

Condition: excellent (used), Year of construction: 2021, operating hours: 14,741 h, Functionality: fully functional, workpiece weight (max.): 10,000 kg, travel distance X-axis: 1,400 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, total height: 3,400 mm, total length: 4,050 mm, total width: 5,120 mm, workpiece height (max.): 795 mm, workpiece width (max.): 1,790 mm, workpiece length (max.): 1,080 mm, overall weight: 10,000 kg, For sale is a used Accutex AU1400iA wire EDM machine Bwjlqovx S Rgjz Uwysl

Condition: refurbished (used), Year of construction: 2011, Functionality: fully functional, GF AgieCharmilles CUT 400 Year of construction 2011 Control Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is cleaned, overhauled and tested for all functions by us after receipt of order. Optional: - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation Belqz Ujuuz Iiewyowl - Clamping bar set

Condition: refurbished (used), Year of construction: 2015, Functionality: fully functional, GF AgieCharmilles CUT 400 Sp Year of construction 2015 Control unit HMI 1 Travels (X / Y / Z): 800 x 550 x 510 mm Travels (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Belqz Ujtt Aknjwyewl Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is currently still in use at the customer and will be cleaned, overhauled and tested for all functions by us after receipt of order. Optional: - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation - Clamping bar set