Used 4 Shaft Shredder for sale (33,877)

Condition: new, Spare parts for Doppstadt Rotaro for sale: - various sieve baskets - 2 pcs of afterpress units - flywheels - control cabinets with Schneider control Tjdpfxoxyz Srj Adlsf - control cabinets with frequency inverter

Condition: used, Year of construction: 2004, functionality: fully functional, overall weight: 4,800 kg, rotor diameter: 368 mm, number of blades: 82, rotor length: 1,500 mm, power: 45 kW (61.18 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, sieve perforation: 22 mm, input voltage: 415 V, extraction nozzle diameter: 250 mm, Just had the main shaft rebalanced, main bearings and housings replaced, gearbox end needed some work doing, gearbox checked and oil changed, all drive belts good, all in had just over £7k spent. Previously had the shredding screen replaced using Hardox with smaller holes cut for finer shred, has front mounted conveyor feeding through a magnetic separator as pictured, dust extractor and of course main control panel. All was working as it should be and then it was turned off, about 4 months ago, so needs to go back to work for someone. Tedpjxp Nm Nefx Adlsf Looking for offers over £8K Shredder located in Carlisle.

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 12298 010, overall weight: 5,000 kg, rotor diameter: 370 mm, number of blades: 60, total length: 3,186 mm, total height: 3,500 mm, total width: 2,900 mm, rotor length: 1,305 mm, power: 63 kW (85.66 HP), rotational speed (max.): 145 rpm, year of last overhaul: 2025, This machine was set up & designed to shred carpet & carpet tiles. It is water cooled & comes complete with a chiller and blower. Todpsxuwtuofx Adlof

Condition: used, Year of construction: 2017, operating hours: 6,777 h, functionality: fully functional, Basic version DW 3060-F “Buffalo” (Carrier Machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. mounting bracket Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Tedpfxexx Tfze Adlsf Reinforced planetary gear 380 kW Additional hydraulic connection 20 l/min Hydraulic preparation for drive system Fuel tank 2 x 300 litres Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic centre section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electrical control system Roller reverse function via electric motor when engine is at standstill Automatically reversing fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional equipment: Hydraulic drive system SHREDDING SYSTEM SIZE “L” 600/4 COMPLETE Additional hydraulic connection 70 l/min Radio remote control Comb extension Size “L” Limiter Mounting for comb extension Limiter Size “L” Overband magnet for rear conveyor Frame for overband magnet Spraying system

Condition: as good as new (ex-display), Year of construction: 2025, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer:600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Todpebtnftjfx Adlsf Control cabinet Electrical control Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Top equipment Location: Ex stock Bitburg - immediately available - at a special price

Condition: ready for operation (used), Year of construction: 2005, operating hours: 8,562 h, functionality: fully functional, Single-shaft shredder, rotor ripper, hydraulic drive, HÄGGLUNDS pump unit, SIEMENS 132 kW electric motor, cutting chamber approx. 2800 x 1300 mm, shaft length approx. 2400 mm, feed hopper 4000 mm x 2500 mm, subframe/base divided for transport purposes, dimensions: length 4500 x width 3300 x height 1400 mm. Inspection and test run possible by appointment. Tjdpfsv Hr Nxox Adlsf

Condition: refurbished (used), operating hours: 3,700 h, functionality: fully functional, total length: 6,000 mm, total width: 2,500 mm, overall weight: 18,400 kg, year of last overhaul: 2009, The Komptech Crambo 5000 shredder is in perfect condition and has been refurbished in 2009 where it got a new mercedes engine. The Mercedes-Benz V8 engine is 435 PK/320 KW and has 2 turbos, making the machine more fuel efficient and powerful. The engine's working hours are 3700 hours. - The machine includes documentation regarding the inspections and history of the shredder. Additionally included are the schematics of all parts in the shredder and the manual of the engine. - The shredder has a remote control. Todpfxjxyk Age Adlsf If there are additional questions or the wish to inspect the machine then feel welcome to contact us.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, power: 405.26 kW (551.00 HP), Mobile shredder on crawler chassis. Diesel engine: 551 HP Folding discharge conveyor Overbelt magnet (neodymium) Radio remote control Detailed description: see pdf-file Tsdpfou R Uaxjx Adlof

Condition: excellent (used), Year of construction: 2000, Rotor Width : 1350 mm Rotor Diameter : 370 mm Hopper dimensions : W 1350 x 1450 mm Hydraulic infeed draw, with 45 degree tilt Engine size : 30 Kw Siewe : Ø 30mm Extra Siewe : Ø 20mm Todpfswf Sgmox Adlof Screw conveyer : 5000 mm Extra set of knives included ( 40 x 40 mm, 4 sides ) Redler/chain conveyer : 5000 mm 45 degree angle with electro magnetic separator( nails/screws) 10 feet shipping container with control panel/hydraulic station inside Machine measures : L 3100mm ( +1000mm hydraulic draw ) x W 2100mm x H 4100 mm Complete unit still connected to power, can be examined in working condition

Condition: excellent (used), Year of construction: 2022, operating hours: 1,530 h, functionality: fully functional, power: 129 kW (175.39 HP), For sale: Arjes Impaktor 250 EVO Tsdpsw Nyt Ijfx Adlsf Year of manufacture: 10/2022 Operating hours: 1530 Equipped with paddle shaft for wood, plastic, commercial waste, etc. A concrete shaft is also included. The machine is fully operational and can be inspected during operation.

Condition: as good as new (ex-display), Year of construction: 2025, Quiet and slow runner WL 4/18,5 kW Todpobunq Hefx Adlsf Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer: 600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Electrical control Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Location: 54634 Bitburg Immediately available

Condition: excellent (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 1754, Arjes Impaktor 250 EVO II with a set of paddle shafts - ONLY 200 OPERATING HOURS!!! Discharge height: approx. 3300 mm Belt width: approx. 800 mm Hopper capacity: 2.25 m³ Shaft length: 1500 mm Weight without options: approx. 13.5 t Details: Drive - Volvo Penta diesel engine ---> 129 kW Crawler chassis Hook lift Shredding unit: Paddle shafts for wood, plastic, commercial waste, etc. Tool shaft length approx. 1500 mm Shredding unit open Fixed hopper Remote control Colour RAL 2004 - 7015 ---> orange-grey Water spray system Optional: Tjdpfx Asxzcizsdlef Used concrete shafts THE MACHINE HAS BEEN USED EXCLUSIVELY FOR PAPER PROCESSING!!!

Condition: used, Year of construction: 2011, functionality: fully functional, Höcker shredder PHSS 40/110 Technical data: Manufacturer: Höcker Polytechnik Type: PHSS 40/110 Year of construction: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: high-speed shredder shaft with counter comb Remark: The machine is in working condition. It has been checked and tested by us in 28816 Stuhr. You can find the video on our website or YouTube channel. Viewings are possible at any time by appointment. We are also happy to carry out tests with your material on request for a fee. We are also happy to answer questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. Tjdpfjw Rcq Sjx Adljf The offers are non-binding, subject to prior sale and revocable at any time. Viewings are possible by arrangement. The sale is ex works, without guarantee or warranty.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 800 mm, rotor length: 1,200 mm, power: 250 kW (339.91 HP), Universal granulator, impact granulator, Drive power: 250 kW, control cabinet with star-delta switching Rotor length: 1200 mm, Rotor diameter: 800 mm, Number of blades/rotor: 36 pcs, Number of blades/stator: 4 x 6 pcs, 2 hydraulically rotatable stators each with 2 rows of counter blades, Hydraulic pusher, Bearing temperature monitoring, Central lubrication for the rotor bearings, Net weight: 29,800 kg, Tsdsxiw Hwspfx Adljf Year of manufacture: 2005, overhauled in 2025, all wear parts replaced. Available from approx. December 2025.

Condition: excellent (used), Year of construction: 2006, Vecoplan VAZ 1300 shredder Tjdpfx Adewu Nwholjf Hopper inlet 2.26 m x 1.65 m

Condition: used, Year of construction: 2018, No. 10027 Single-shaft shredder AMIS / WEIMA WT 15 Used, year of construction 2018, approx. 250 operating hours According to our customer, the machine is fully functional and can be viewed and tested on site Single-shaft shredder for cables, plastics & recycling Feed opening 1500 x 1160 mm LW Rotor width 1500 mm Rotor diameter 368 mm Rotor speed approx. 90 rpm Motor output 90 kW System output 99 kW Power consumption 210 A Voltage 400 V / 50 Hz PLC control Siemens SIMATIC The high-performance shredder in the WT series is ideal for processing a wide variety of plastics - especially difficult, flexible materials such as films, filaments, big bags, tapes, carpets, textiles, foams and all loose and non-bulky waste materials. The WING-RAM swing arm ensures that even contaminated or moist material is fed safely. Incl. angled conveyor belt / discharge belt AMIS FB 7000 x 1500 x 580 / year of construction 2018 / 1.5 kW Incl. magnetic separator AMIS Installation dimensions approx. 9000 x 3500 x 3950 mm LWH Transport dimensions single-shaft shredder approx. 3000 x 2700 x 3200 mm LWH Tjdpfsxwdiujx Adlef Weight approx. 12500 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, transport and loading by us optionally possible Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Year of construction: 1985, For sale: Robust industrial shredder by Vecoplan, model VAZ 145/130, year of manufacture 1985. Ideal for wood waste, offcuts, pallets, battens, and other materials from joineries or sawmills. Especially suitable for operations seeking to efficiently and reliably reduce wood scrap – whether for further processing, thermal use, or container loading. Manufacturer: Vecoplan Model: VAZ 145/130 Year: 1985 Technical specifications: - Heavy-duty, compact industrial shredder – built for continuous operation and processing of large material thicknesses - Sturdy rotor shaft with hardened knife segments - Large feed opening and powerful intake – bulky wood waste is no problem - Solid steel construction - Simple, maintenance-friendly design – spare parts and knife re-sharpening readily available Application areas: Tedpfxsx Af R Re Adljf - Wood waste from cutting, planing, or sawmill operations - Pallets, boxes, beams, battens, scrap wood, offcuts - Preparation for thermal recycling or further processing - Waste management in joineries or timber trade

Condition: refurbished (used), Year of construction: 2018, operating hours: 4,865 h, overall weight: 30,000 kg, Doppstadt DW 3060K Biopower Type F Year of manufacture: 2018 Operating hours: 4,865 Engine: Mercedes MTU, 490 HP 42 teeth AdBlue Crawler chassis Tedpfx Ajxxb Uwjdljf Remote control Overband magnet Weight: 30,000 kg Machine is overhauled and immediately available.

Condition: good (used), Year of construction: 2018, operating hours: 1,011 h, functionality: fully functional, Single-shaft shredder GROSS, Model GAZ 82 S, Year of manufacture: 2018 Technical data: Manufacturer: GROSS Apparatebau Model: GAZ 82 S Year of construction: 2018 Operating hours: 1,011 Drive power: 37 kW Feed opening: 800 x 1,200 mm Hopper capacity: 1 m³ Rotor diameter: 368 mm Rotor length: 800 mm Tsdpsw Rcr Nefx Adlsf Rotor speed: 60–120 rpm Extraction port diameter: 200 mm Dimensions: approx. 2,100 x 1,700 x 1,750 mm (LxWxH) Weight: approx. 2,500 kg Materials: Wood, cardboard, plastic Accessories: Hopper Remarks: The shredder is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. The video is available on our website or YouTube channel. Inspections, including under power, are possible at any time by appointment. On request, we also carry out test runs with your material for a handling fee. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday, 8:00 a.m. to 2:00 p.m. On Fridays, we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data is based on manufacturer information. We accept no liability for the accuracy of the information provided or for any possible errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections can be arranged by appointment. Sale is ex works, prepaid, without warranty or guarantee.

Condition: used, Year of construction: 2017, Weima HWN-2-1000 chipper for shredding wood and similar materials such as plastics or cardboard. The machine features a robust design, a large feed hopper, and two powerful rotors for continuous material feeding. Optional new blades available at an additional cost. rotor diameter: approx. 354 mm rotor length: 1.000 mm Number of knives: 2 x 72 drive power: 2 x 18.5 kW Tsdpfexvzzxsx Adlef Dimensions: 2.4 x 2 x 2 m sieve size: 10 mm

Condition: ready for operation (used), Year of construction: 2010, Technical Specifications Specification Detail Motor Power 2 × 15 kW (Total 30 kW) Tedpfx Adjxlcvcjlef Cutting Chamber (L × W) 1,074 mm × 524 mm Distance Between Shafts 192 mm Rotor / Shaft Type Twin-shaft, hexagonal (85 mm A/F), counter-rotating Knife Diameter 260 mm Knife Thickness 15.5 mm Overall Dimensions (L × W × H) 2,770 mm × 1,460 mm × 2,700 mm Approx. Weight 2,100 kg Drive Type Electric, geared reducers Construction Heavy-duty steel frame, self-cleaning shafts Throughput (typical) 0.5–3 t/h depending on material type and knife configuration ♻️ Suitable For Plastic lumps, profiles, film, and containers Wood waste, pallets, and offcuts Electrical and electronic scrap (WEEE) Light metals, cans, general waste Paper, cardboard, and confidential document shredding

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, overall weight: 950 kg, warranty duration: 12 months, power: 7.5 kW (10.20 HP), input current: 32 A, input voltage: 400 V, type of input current: three-phase, year of last overhaul: 2025, Mercodor shredder ZM 44 complete machine with safety devices and switches. Siemens PLC control with overload protection etc. Machine with a cutting area of 500x380 mm knife 14 mm 3 hooks drive 7.5 KW. Tjdsiv Sr Njpfx Adlof

Condition: used, HERBOLD single-shaft shredder EWS 45/200 With pressing device (pendulum arm) Tedpfx Adoxgtp Asljf Working width 2000 mm Rotor diameter 450 mm Drive 2 x 90 kW Machine in very good condition, ready for operation

Condition: good (used), Year of construction: 2017, functionality: fully functional, Vecoplan Shredder, Type VAZ 110, year of manufacture 2017, with hopper and extraction port. Manufacturer: Vecoplan Type: VAZ 110 Year of manufacture: 2017 Motor rated power: 18.5 kW Frequency inverter rated power: 22 kW Feed opening: 1200 x 1075 mm Rotor diameter: 250 mm Rotor length: 1075 mm Rotor speed: 90-250 rpm Number of cutting tools: 27 Throughput: 2 cbm/h Screen hole size: 20 mm Extraction port diameter: 200 mm Tedpfx Adow Rcrislef Dimensions: approx. 2355 x 1590 x 980 mm (LxWxH) Weight: approx. 1800 kg Accessories: Spare parts package with 20 mm screen, 1 set of tools, cutters and counter cutters, motor, plastics, springs, etc. Materials: Wood waste, films, packaging material, chipboard, paper, textiles Remarks: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find the video on our website or YouTube channel. Complete documentation including CE declaration is available. Inspections can be arranged at any time by appointment. On request, we are also happy to carry out test runs with your material for a handling fee. If you have any questions about the machine, we are available by phone Monday to Thursday from 08:00 to 14:00 h and Friday from 08:00 to 13:00 h. Please note: All technical data is based on manufacturer information. We do not accept liability for the information provided or any possible errors. All offers are subject to change, prior sale, and revocation at any time. Inspections can be arranged upon request. Sale is ex location, without warranty or guarantee.

Condition: used, HERBOLD single-shaft shredder EWS 45/200 Tsdpfx Ajxgq S Ujdlof With pressing device (pendulum arm) Working width 2000 mm Rotor diameter 450 mm Drive 2 x 90 kW Machine in very good condition, ready for operation