Condition: ready for operation (used), 1 used 3-jaw face spiral lathe chuck
Type: 160 6 1/4"
Faced spiral lathe chuck with central adjustment of the clamping jaws
diameter: 160 mm
Inner diameter: 42 mm
Chuck flange: Camlock DIN 55029 size 4 (cone Ø 63 mm)
- 1 set of chuck jaws stepped outwards
Weight: 8,5 kg
Condition: used, 3-jaw wedge bar lathe chuck FORKARDT TYPE F+160
No. 1659 181
Identical in construction Forkardt F315 or SMW
diameter: 160 mm
Inner diameter: 45 mm
Chuck flange: short taper DIN 55022 size 6
1 set of chuck jaws consisting of base jaws and hard top step jaws for turning
1 set of chuck jaws consisting of base jaws and soft top step jaws for turning
- central adjustment
Weight: 11 kg
Condition: excellent (used), Four-jaw chuck make Roto Record
type DHK 315 x 4
short taper size 8
taper diameter 139,735
bolt circle diameter 171,4 mm
diameter 315 mm
Jaws individually adjustable
Condition: reconditioned (used), Year of construction: 2000, well maintained four-jaw chuck from RÖHM (planspiral)
Guides and face spiral are good- very good quality,
outer diameter 250 mm,
bore diameter approx. 80 mm.
The planspiral chuck has a cylindrical receptacle.ø 200mm
incl. base jaws, the top jaws are reversible.
(very good condition)
Chuck width without jaws approx. 85 mm
The chuck weighs approx. 35-40 kg (forwarding shipment)
chuck key =option
Year of manufacture was estimated.
Shipping costs due to the weight via forwarding agency
Shipping within the EU on request
Condition: good (used), Year of construction: 1997, Three-jaw lathe chuck make SCHUNK type ROTA-S 160
make # 973401 year of construction 1997 with jaw lock
max. chuck speed 5200 rpm.
chuck diameter 160 mm
bore 42 mm
jaw clamping force 6000 daN
weight approx. 7,7 kg
- 1 set of hard base jaws
- 1 set of soft top jaws
- 1 flange DIN 55022/5
very little used, in very good condition
Condition: used, Lathe chuck, power chuck RÖHM type KFD-F 500/3
Ident. No.: 421410
Diameter 500 mm
Conical centering ring receptacle taper size 15 = Ø 285.8 mm
Jaw mounting 90° pointed toothing
Groove width jaw receptacle 25.5 mm
Total jaw width serration with groove 60 mm
Actuating force max. 9500 daN
Speed max. 2500 rpm
- Power chuck without passage
- Central tension screw: M30x 3,5 mm
- Fastening screws lathe chuck 6 pieces M24x 3 mm
Weight 253 kg
Further power chucks under stock numbers: 56823, 58013
Condition: excellent (used), Year of construction: 2010, Four-jaw chuck 27974
diameter 250 mm
4 individually adjustable jaws
Mounting : Long taper diameter 80 mm
with external thread 125 x 3 mm
Parallel keyway 10 mm
total depth with flange and jaws 193 mm
Weight 29 kg
Age was estimated
Condition: new, New 3 jaw selfcentering chucks BISON available from Stock:
New 4 Jaw Independent Chucks from Stock
ASK FOR BEST PRICE
Condition: used, Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set
-Top jaws: rotary jaw set for power chucks, 4 sets
-Jaw width: mm
-Dimensions: see photo techn. drawing
-Transport dimension: 330/230/H105 mm
-Total weight: 27.5 kg
Condition: used, Type 4
Technical data :
Center width approx. 400 mm
Center height above bed 120 mm
24 speeds from 71 - 2240 rpm
Drive power 0.6 / 0.8 kW
Longitudinal feed, infinitely variable approx. 6 - 450 mm/min
Condition: good (used), Vertical lathe BERTHIEZ type 9340/4
Maximum turning diameter: Ø 3200 mm
Table diameter : Ø 1800 mm
Machining height: 1660 mm
Max. turning diameter at center: Ø 2900 mm
2-axis HEIDENHAIN visualization
Vertical runner stroke: 975 mm
Table speed: 2.5 to 125 rpm
Carriage tilt on arm: +/- 45°.
Carriage tilt on upright: +/- 30°.
Motor power: 36 kW
Supplied with a Ø 2840 mm sub-platen
Weight: approx. 25 T
Condition: good (used), COPY LATHE type BULLERI 110 / 4 LS . AUTOMATIC , HYDRAULIC .
full hydraulic movements
second hand machine
with tools : Yes
distance between mandrins mm. 320
max. working diameter mm. 315
max. working lenght mm.1100
rotation tools speed rpm 4850
n.02 cutter motor ( motor power Hp 7,5 each one )
hydraulic pump motor Hp 1,5
total installed power Kp 18
weight kgs. 2500
pressing force: 150 t, installation height: 780 mm, motor power: 15 W, ram stroke: 500 mm, table length: 800 mm, table width: 800 mm, Condition: used, Hydraulic double column press Fabr. unknown
Pressing force 150 t / 0 - 600 kp/cm²
Cylinder diameter 260 mm
Stroke 500 mm
Table size 800 x 800 mm
Installation height 780 mm
Drive power 15 kW
External dimensions approx. 2250 x1400 x 3000 mm
Weight approx. 6.2 t
- with and without throttle
- with and without ejector
- Lower and upper piston
- Injection press 0-10
- Quick presses 0 - 150 sec.
- with and without venting
- T-slots in upper and lower table
used, in good condition
chuck outer diameter: 315 mm, through hole: 102 mm, Condition: excellent (used), Year of construction: 2021, 5373
3-jaw manual chuck
up to 3,500 min-1
1 set of base jaws + 1 set of hard top jaws
Condition: reconditioned (used), machine/vehicle number: 089273, Three-jaw power chuck wedge bar chuck
Hollow chuck with thread for drawtube connection.
SMW type:KNC S 250
Threaded connection probably M 50 x 2 mm
should still be checked.
Cylindrical holder ø 220mm for spindle flange
SMW type:KNC - 250
The chuck is currently being overhauled.
Current pictures will follow shortly
DIN flange mount 220 mm
Chuck in good condition.
Condition: good (used), 4-jaw vice / vice clamping fox, rotatable with scaling the jaws can be rotated by 180°
Inspection before purchase desired, by appointment only
only to these delivery conditions.
Sale only to companies and tradesmen.
We accept no liability for any of the requirements specified in the accident prevention regulations (UVV).
Machines and equipment are deemed to have been accepted when they leave the factory.
There is no guarantee for machines and equipment.
Condition: ready for operation (used), Year of construction: 1990, Available immediately from location :
CNC Lathe MAZAK
Type Quick Slant 30 4 Axis
Year of construction 1990
Control Mazatrol T 4
turning diameter 350 mm
Center distance 800 mm
Hydraulic chuck 300 mm
2 turrets with 8 tools each
Spindle drive 22 kw
Spindle speeds up to 4000 rpm
Weight 6 to
At a price of Euro 4,500 plus VAT ex location
overall weight: 50 kg, chuck outer diameter: 315 mm, three-jaw chuck diameter: 315 mm, Condition: good (used), machine/vehicle number: 371522, Power chuck - Wedge bar chuck - Hollow clamping
with threaded connection for drawtube connection
Spindle connection according to DIN 55027 Short taper 8 approx. 139 mm
The chuck is currently being cleaned and checked
Due to the weight, shipping is carried out by a forwarding agent
Foreign customers please ask for shipping costs in advance.
Bolt circle diameter on request
Various base jaws and top jaws on request
Condition: ready for operation (used), Hydraulic six-jaw chuck
Power chuck Ø460mm
HSW-Schmid 23 150 26
for CNC lathe
with quick jaw change function
F max. 4500 daN
n max. 1500 1/min.
overall weight: 40 kg, chuck outer diameter: 250 mm, three-jaw chuck diameter: 250 mm, total height: 10 cm, short taper mount: 8 mm, cone mount: 8 mm, cone diameter: 139 mm, through hole: 63 mm, Condition: good (used), machine/vehicle number: 0256-723989, Three-jaw chuck
Wedge bar chuck
with stepped block jaws.
The chuck is in good condition,
has been cleaned, checked and partially overhauled.
incl. 4 x fixing screws for spindle flange
according to DIN 55027 bayonet lock
Clamping key not available.
Three-jaw chuck no. 723989 with flange.
Spindle mount DIN 55027 - J8 = KK8 approx. ø 138 mm.
Other flange sizes on request
other base jaws or top jaws are available (option).
Shipped on a one-way pallet due to the weight.
Condition: used, Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck, manual chuck
-Manufacturer: Forkardt, power chuck three-jaw chuck type F250/K6
-Chuck size: Ø 250 mm
-Passage: Ø 67 mm
-Receptacle: Short cone 6 / cone 103 - 105 mm
-Weight: 37 kg