Used 5 Head Moulder for sale (32,700)

Condition: used, Year of construction: 1989, max. wheel diameter 400 mm gear width 275 mm max. module 6 Overall size 300x330x245 cm weight of the machine ca. 5,5 t Specification: Max wheel diameter: 400 mm Min module: 1 Max module: 6 Table diameter: 370 mm Max wheel diameter: -With counterstay: 340 mm -Without counterstay: 400 mm Max axial offset: 275 mm Max tangential adjustment: 100 mm Tooth helical angle: 45 degrees Max cutter diameter: 145 mm Max hobbing length: 170 mm Hob turning speeds capacity: 63-180 U/min Feeds infinitely variable axial: 0,2-10 mm/U Feeds infinitely variable tangential: 0,1-5 mm/U Radial for spur gears: 0,1-4 mm/U Radial for worm gears: 0,025-1 mm/U Hodpfx Agou A I Els Nonu Rapid traverse axial: 500 mm/min Rapid traverse tangential: 250 mm/min Radial for spur gears: 400 mm/U Radial for worm gears: 100 mm/U Motor power: 7.4 kW

Condition: excellent (used), Weiss Type: WK3-2200/40/5/V Weiss Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rates: Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Temporal ± 0.8 K Spatial ± 2.0 K Heat compensation max. 8000 W Specifications for Climatic Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% rH Temperature deviation (temporal): ± 0.3 K Humidity deviation (temporal): ± 3% rH Temperature uniformity: Spatial ± 1.0 K Hnedpfxjw I Rxrs Ag Nju Heat compensation max.: 500 W Test chamber volume: 2,160 liters Test chamber dimensions: Height 1,115 mm, Width 1,400 mm, Depth 1,400 mm External dimensions (lowered): Height 2,318 mm, Width 1,860 mm, Depth 3,658 mm External dimensions above shaker: Height 2,710 mm External dimensions max. stroke height: 3,038 mm Exchangeable floor dimensions: Width 1,600 mm, Depth 1,504 mm Operating Data: Rated voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse: 80 A slow-blow Refrigerant: R 404A Weight: approx. 2,100 kg Important information for your safety as a buyer: The following points will be carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with refrigerant compliant with legal regulations 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, spindle bore: 20 mm, CNC Fanuc 32i MACHINE CONCEPT Number of linear axes + C axes + B axes: mm 5 + 1 + 0 Number of spindles: 2 Number of channels: 2 MAIN SPINDLE Maximum bar passage: mm 20 Number of revolutions: rpm 10,000 Power (S2 30 min/S1): kW 3.7 / 2.2 Torque (S2 30 min/S1): Nm 23.6 / 14 COUNTER SPINDLE Maximum bar passage: mm 20 Number of revolutions: rpm 10,000 Power (S2 30 min/S1): kW 2.2 / 1.5 Torque (S2 30 min/S1): Nm 7.0 / 4.8 WORK AREA Z1 stroke: mm 60 Tool holders 1 stroke X1 / Y1: mm 50 / 325 Counter spindle stroke X2 / Z2: mm 220 / 170 Rapid speed on linear axes X1, Z1, X2, Z2/Y1, Y2: m/min 32/32 Acceleration of linear axes: m/s2 5 TOOL HOLDERS ON SLIDE 1 Fixed turning tools: 6 Tools for frontal and secondary machining: 6/3 Driven tools: 2 + 2 Maximum number of revolutions: rpm 6,000 Power (S3 40% / S1): kW 1.3 / 0.8 Torque (S3 40% / S1): Nm 2 / 1.3 Power (S3 40% / S1): kW 1.3 / 0.8 Torque (S3 40% / S1): Nm 3.5 / 3 TOOL HOLDER ON SLIDE Y2 Fixed/motorized tools for secondary machining: 4/0 Maximum number of revolutions: rpm 6,000 Power (S3 40% / S1): kW 1.2 / 1 Torque (S3 40% / S1): Nm 2.5 / 2 Hnodpfx Ajwifrkog Nsu

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17037, overall weight: 350 kg, Robamat temperature control unit Technical data: Voltage: 400V Frequency: 50 Hz Current: 63A 24V DC Max. temperature: 320°C Ideally suited for precise temperature regulation in industrial processes and machine control systems. This proven model supports demanding temperature management in manufacturing environments and stands out for its reliable performance under moderate operating conditions. Supplied complete with the relevant documentation and, where available, an operating manual. Hodpfx Aow U Dc Rsg Njnu

Condition: used, fuel type: diesel, overall weight: 8,500 kg, Year of construction: 2007, machine/vehicle number: 524899K, Please submit inquiries exclusively by email or directly via Machineseeker. Hedpfoxmg I Esx Ag Njnu

Condition: used, Year of construction: 1977, pressure 30 t throat 110 mm Hnjdpfovuugpjx Ag Nju stroke 50 mm no. of strokes 35 - 80 /min passage to the back 170 mm dayligth 230 mm table surface area 410 x 260 mm table height over floor 790 mm ram surface 190 mm ram adjustment 35 mm power requirement 1,0 x 1,1 x 1,8 kW Weight 1,3 t permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) as is where is, WITHOUT putting into operation - video at seller's site before dismantling available

Condition: used, mileage: 389,755 km, power: 265 kW (360.30 HP), first registration: 03/2015, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 5,050 kg, empty load weight: 12,950 kg, wheelbase: 5,200 mm, brakes: engine braking, driver cabin: other, gearing type: automatic, emission class: euro6, loading space width: 2,450 mm, loading space length: 5,600 mm, loading space height: 1,000 mm, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, parking heater, power assisted steering, seat heater, soot filter, trailer coupling, * German vehicle * 1st hand * Complete documentation and crane inspection book available * Palfinger PK 15001L Performance rear crane * Crane height 15.10 meters * 5 + 6 control circuits * Grapple control * 11.10m = 1,060Kg - 8.80m = 1,350Kg - 4.90m = 2,760Kg - 2.00m = 5,900Kg * 3 fully hydraulic extensions / crane * 2 hydraulic outriggers * High steering * Palfinger stone tongs, available at extra cost * Platform dimensions L = 5600mm - W = 24500mm - H = 1000mm * Aluminum loading flaps * Spring flaps * DIN lashing eyes and lashing strips * Trailer coupling * Towing capacity 24,000 kg * Air suspension + raise/lower * L-cab * Auxiliary heating * Air conditioning * Air suspension comfort driver's seat * Heated seats * Multifunction steering wheel * Cruise control * Radio * E-window * Heated and electrically adjustable exterior mirrors * Electric engine brake * ESP/ ABS * Bluetooth telephone * Storage box * Wheelbase 5200 mm * 18,000 kg gross vehicle weight * Unladen weight 12,950 kg * Payload 5,050 kg If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. Hsdpfxevhqfue Ag Nenu - .

Condition: used, mileage: 158,088 km, power: 180 kW (244.73 HP), first registration: 06/1996, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: mechanical, emission class: euro2, loading space width: 2,490 mm, loading space length: 4,520 mm, loading space height: 800 mm, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, crane, soot filter, Equipment: - All-wheel drive with lockable differentials, - Werner winch, - Reinforced rear axle suspension pack, - Trailer coupling (AHK), - ABS, - Roof hatch, - Sun visor, - Driver’s air-sprung seat, - 6-speed manual transmission, - Preparation for auxiliary heater, - Retrofit of a diesel particulate filter, Body/Crane: - Flatbed with aluminum side walls, - Load area dimensions (LxWxH): 4,520mm x 2,490mm x 800mm, - Raised front bulkhead, - Palfinger Crane 14,500 B, - Radio remote control, - 2-point outrigger support, - Emergency stop, - 5+6 hydraulic circuit, Load capacity/Outreach: - Max: 4,390 kg Hydraulic outreach: - 3,220 kg at 4.10 m - 2,080 kg at 6.10 m - 1,510 kg at 8.20 m Mechanical outreach: - 920 kg at 12.5 m - 720 kg at 14.7 m - 530 kg at 16.7 m Other: - German first delivery, - 2 previous owners (energy supply sector), - Payload: 6,840 kg according to registration document, Since 1972, your reliable partner for automotive and commercial vehicles in 28832 Achim, near Bremer Kreuz. NutzfahrzeugZentrum Behnke constantly offers around 200 vehicles ranging from transporters and commercial vehicles to construction machinery! We continuously offer attractive financing options with favorable special conditions. If interested, we will gladly prepare an individual offer for you! Hnodpswul T Ejfx Ag Nsu Trade-in of your commercial vehicle or construction machinery is welcome. If a new TÜV certification is required, we can obtain a quote from our partner workshops. Our offer generally does NOT include a new TÜV certification. Delivery of your "new" commercial vehicle by our external partners is possible at an additional cost. The information provided in advertisements, online, on price tags, and in pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability or warranty for typos or data transmission errors. Listed equipment details may need to be checked separately. Subject to error and prior sale.

Condition: good (used), Year of construction: 2011, For Sale: Konig Industrie Rex I 6/5 rows Range: 33 - 95 grams Year of manufacture: 2011 very well maintained schematics available + hopper with oil system + spreading bands Note: The control cabinet is missing. (New control cabinet price approx. €10,000) However, it is possible to directly connect this Rex to a proofer that has a control cabinet. Transport upon agreement. The head machine is ready for transport. It is possible to assemble this head machine on site for inspection. Hnsdpfjw Edmfex Ag Nju Viewing possible on location. Price: €35,000 EXW If you have any questions or comments, please do not hesitate to contact us. Kind regards, Leo Holland

Year of construction: 2020, condition: new, functionality: fully functional, Brand new in the box, never used. Please check out our other listings as well. Hodpfxewiqggs Ag Nonu

Condition: good (used), Rotary tray sealer in lovely condition. Choice of tooling sizes available Hnodeu Nn Rnjpfx Ag Neu

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm Hnjdpfx Asvuuknjg Neu table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, mileage: 363,544 km, power: 265 kW (360.30 HP), first registration: 02/2016, overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 4x2, maximum load weight: 5,470 kg, empty load weight: 12,530 kg, next inspection (TÜV): 03/2024, wheelbase: 5,400 mm, brakes: engine braking, driver cabin: other, gearing type: automatic, emission class: euro6, loading space width: 2,500 mm, loading space length: 6,200 mm, loading space height: 950 mm, operating hours: 3,942 h, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, crane, cruise control, navigation system, onboard computer, power assisted steering, seat heater, soot filter, trailer coupling, * German vehicle * 1st hand * Condition see photos * Complete documentation available * Crane inspection 06-2024 * Palfinger crane type: PK 15001 L * only 3.942 operating hours * 6.200 kg. lifting capacity * 11.10 m = 1,060 kg * 8.80 m = 1,470 Kg. * 6.80 m = 2,060 kg. * 4.90 m = 2,880 kg. * 5th + 6th control circuit * Stone tongs available at an extra charge * 2 hydraulic outriggers * High seat steering * Platform dimensions: 6.20 m x 2.50 m x 0.95 m * Screen-printed floor * Aluminum loading flaps * DIN lashing eyes * High bulkhead * Trailer coupling * Gross train weight: 44,000 kg. * Automatic gearbox * Multifunction steering wheel * Cruise control * Air conditioning * Bluetooth CD radio * Navigation system * Comfort driver's seat, air suspension * Heated seats * Electric windows * Heated electric mirrors Hsdpfx Agjvhpz Uo Nonu * Engine brake * Leaf/air suspension + raise/lower * Storage box * Rotating beacons * Wheelbase: 5,400 mm * max. gross vehicle weight: 18,000 kg * Unladen weight: 12,530 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 158,088 km, power: 180 kW (244.73 HP), first registration: 06/1996, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: mechanical, emission class: euro2, loading space width: 2,490 mm, loading space length: 4,520 mm, loading space height: 800 mm, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, crane, soot filter, Equipment: - All-wheel drive with locking differentials - Werner winch - Reinforced rear axle suspension package - Tow hitch (AHK) - ABS - Roof hatch - Sun visor - Driver air suspension seat - 6-speed manual transmission - Pre-installation for auxiliary heater - Retrofit diesel particulate filter Body/Crane: - Dropside flatbed with aluminum side panels - Cargo area dimensions (internal): 4,520 mm x 2,490 mm x 800 mm - Increased front wall - Palfinger crane 14.500 B - Radio remote control - 2-point outriggers - Emergency stop - Control circuits: 5+6 Load capacity/outreach: - Max: 4,390 kg Hydraulic outreach: - 3,220 kg at 4.10 m - 2,080 kg at 6.10 m - 1,510 kg at 8.20 m Mechanical outreach: - 920 kg at 12.5 m - 720 kg at 14.7 m - 530 kg at 16.7 m Other information: - First delivery in Germany - 2 previous owners (energy supply company) Hedsw Ua Ehspfx Ag Nenu - Payload 6,840 kg according to registration certificate Since 1972, your reliable partner for cars and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always keeps around 200 vehicles in stock: vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options with special conditions. If interested, we are happy to provide a tailored financing proposal. We welcome trade-ins of your commercial vehicle/construction machinery. If a new TÜV inspection is required, we will gladly provide a quote via our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle is possible via our external partners for an additional charge. The information given in adverts, online listings, price tags, and pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical or data transmission errors. Listed features may need to be checked separately. Subject to error and prior sale.

Condition: used, High-speed milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000 Speed max. 15000 rpm at 70% ED Hnedpfef Axn Ujx Ag Nju Gear ratio 1:5 Power transmission up to approx. 2.5 kW Front dimension 110 mm (machine spindle to clamping nut) Tool holder MK4 with M16 tightening thread Collets type OZ16 Ø 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mm dead weight 6.5 kg good condition

Condition: used, mileage: 415,120 km, power: 375 kW (509.86 HP), first registration: 07/2021, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, parking heater, * MAN Tgx XXL 18.510 4x2 * Automatic transmission * Retarder * Km between: 338716 - 480495 km * Year of manufacture 07-2021 * Completely new service performed * Vehicles without defects * Had a service contract with MAN * 5 available * 415,120 km * 433,633 km * 436,952 km * 441,265 km * 496,466 km * Price on request * All information without guarantee MAN Tgx 18.510 Tractor unit, white, leaf-air suspension, automatic transmission, 4x2, diesel, Euro6, green emissions sticker, year of manufacture (07/2021) Equipment: Aero package, Efficientline package, electronic braking system EBS, brake assist, Hodpjuatdxefx Ag Nsnu Cruise control: EfficientCruise 3, lane keeping assist, LED headlights, headlight cleaning, headlight range adjustment, fog lights, tinted glass: door windows tinted, VSG windshield tinted, cornering light: LED, MAN Media Truck, fifth wheel coupling: 185 mm height, JOST JSK 42 K0 2 inch, roof hatch: glass roof hatch electrically with shading and mosquito net, roof spoiler: 600 mm, exterior mirrors electric and heated, rear differential lock, twin tires Wheelbase: 3,600 mm

Condition: like new (used), Year of construction: 2012, Profiling parquet Celaschi Team 60/5 5+5 motors Min. Working width 78 mm Speed up to 50 m/min T&G profile Tools included Indeed conveyor belt Hnedpfx Asxf Ttfsg Nju

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: R14102942 / E14130753 (Steuerung), overall weight: 1,270 kg, load capacity: 250 kg, arm reach: 2,655 mm, controller manufacturer: FANUC, controller model: R-30iB, input voltage: 400 V, FANUC industrial robot Robot R-2000iB 250F, Year of construction 01.2014 (control cabinet 12.2013). Axes: 6, reach: 2,655 mm, Load capacity: 250 kg. Dimensions: Length 200 cm, width 110 cm, height 185 cm. Control cabinet: FANUC R-30iB. Complete with robot manipulator, connection cable, teach panel, control unit. (See type plates for further details). IPendant A05B-2255-C101#EGN Hnedpfxeth I Hds Ag Nou We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot. Packaging and loading included.

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 2,257 h, functionality: fully functional, machine/vehicle number: SN7682, travel distance X-axis: 730 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 585 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 21 kVA, controller manufacturer: Heidenhain, controller model: TNC640, total height: 3,000 mm, total length: 2,370 mm, total width: 2,845 mm, overall weight: 8,000 kg, spindle speed (max.): 42,000 rpm, operating hours of spindle: 2,256 h, number of spindles: 1, number of slots in tool magazine: 90, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, MP7-5 Axis Heidenhain TNC640 with integrated pallet changer, 40 pallet stations Travel range X/Y/Z: 730x250x400 mm B-axis travel range: +/- 105 degrees C-axis: infinite Working area X/Y/Z: 585x250x400 mm Maximum workpiece weight: 60 kg Distance machine table to spindle nose: 450 mm Machine dimensions (WxDxH): 2845x2370x3000 mm Machine weight: 8,000 kg Equipment: Cooling unit Rotary tilting table 160 (B/C axis) Workpiece measurement Renishaw OMP400 Dust extraction L-CUT 5-axis table chuck EROWA PowerChuck Pallet changer ITS50/150 pallets Hnjdpfxsw U D Ige Ag Nsu Tool changer with 90 positions MHT media distributor Control unit Heidenhain TNC640 Milling spindle Steptec HVC140 Spindle speed: 42,000 rpm HSK40

Condition: good (used), adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range: 190-1000 rpm -Motor: adjustable Hjdpfoc I Rlajx Ag Nenu -Shaft: Ø 14 mm -Design: B5 -Number: 4 motors available -Price: per piece -Dimensions: 460/200/H200 mm -Weight: 22 kg

Condition: used, mileage: 175,730 km, power: 397 kW (539.77 HP), fuel type: diesel, color: blue, axle configuration: 10x4, tire size: 385/65R22.5, fuel: diesel, wheelbase: 5,100 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, Year of construction: 2016, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, traction control, trailer coupling, = Additional Options and Accessories = - AdBlue system - Differential lock - Electric windows - Remote central locking - Refrigerator - Drawbar coupling - Hub reduction - PTO (Power Take-Off) - Radio - Reversing camera - Disc brakes - Sun visor - Spotlights - Auxiliary heater - Toolbox - Central lubrication system = Remarks = Volvo FH 540 10x4 Dynamic steering. Hub reduction. Workremote. Erkin ER 245.000 L 7+5 Jib. Winch. Scanreco radio remote control. Central lubrication. 6 x hydraulic outrigger. 7 x hydraulic extension on main boom. 5 x hydraulic extension on fly jib. Max hydraulic reach: 36.8 m. Max lifting capacity: 45,000 kg. 4.80 m – 46,000 kg 6.80 m – 35,600 kg 9.60 m – 24,000 kg 11.50 m – 19,000 kg 13.80 m – 14,000 kg 15.90 m – 12,500 kg 18.30 m – 11,000 kg 20.70 m – 9,000 kg Manual extension: 23.60 m – 7,200 kg Jib -5: 24.30 m – 4,200 kg 27.10 m – 3,460 kg 29.40 m – 2,900 kg 31.70 m – 2,460 kg 34.20 m – 2,026 kg 36.80 m – 1,700 kg Manual extension: 40.20 m – 1,000 kg 43.60 m – 800 kg 46.80 m – 350 kg = Further Information = Technical Information Number of cylinders: 6 Drivetrain AdBlue system: Yes Axle Configuration Brakes: Disc brakes Hnjdpfx Agowt T A Ej Nou Front axle 1: Tire size: 385/65R22.5; Steering; Tire tread left: 75%; Tire tread right: 75%; Suspension: leaf spring Front axle 2: Tire size: 385/65R22.5; Steering; Tire tread left: 70%; Tire tread right: 70%; Suspension: leaf spring Rear axle 1: Tire size: 315/80R22.5; Twin tires; Tire tread left inner: 30%; Tire tread left outer: 30%; Tire tread right inner: 30%; Tire tread right outer: 30%; Suspension: air suspension Rear axle 2: Tire size: 315/80R22.5; Twin tires; Tire tread left inner: 80%; Tire tread left outer: 80%; Tire tread right inner: 80%; Tire tread right outer: 80%; Suspension: air suspension Rear axle 3: Tire size: 385/65R22.5; Steering; Tire tread left: 70%; Tire tread right: 70%; Suspension: air suspension Weights Curb weight: 53,320 kg Payload: 680 kg Gross vehicle weight: 54,000 kg Functional Crane: Erkin World Power Financial Information Price: On request Identification Type number: FH 540 10x4 / ERKIN 245.000 L 7+ = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po ryccki. We strive to provide accurate information; however, no rights can be derived from the text provided.

Condition: used, Year of construction: 2022, operating hours: 570 h, lifting height: 5,500 mm, fuel type: diesel, motor manufacturer: -, Functional Lifting capacity: 1.600 kg Maximum passing height: 214 cm Identification Serial number: 8FBM16T-13088 Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Solideal Front tyre size: 18x7-8 Rear tyre size: 18x7-8 Transport dimensions (LxWxH): 3.2x1.05x2.13 Additional information Hnjdetr Hl Iepfx Ag Nou Please contact PFEIFER GROUP for more information

Condition: excellent (used), Weiss temperature chamber Here we offer a Weiss temperature chamber. Weiss temperature chamber air cooled with Weiss condenser cooler Test chamber capacity approx. 990 liters Data for temperature tests: Temperature range -70°C to +180°C Temperature deviation in time in the center of the chamber ± 0.1 to ± 0.5 K Temperature deviation spatially ± 0.5 to ± 2.0 K Temperature gradient (acc. to IEC 60068-3-5) 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating 5 K/min Cooling 5 K/min Heat compensation max. 2750 W Feedthrough built into basic equipment R1: NW 125 mm L1: NW 50 m Dimensions: Test chamber dimensions: Width 1100 mm x depth 950 mm x height 950 mm Housing dimensions: width 1390 mm x depth 1525 mm x height 1995 mm maximum load (evenly distributed over the surface) of the test chamber floor 150 kg per insert grate 50 kg total load of the grate supports 100 kg Hnsdpop Dun Aefx Ag Nju Data for operation: Test room lighting halogen bulb 24V, 50W Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 27,0 kW Rated current 42,02 A Heat output water-cooled test chambers max. heat output to environment 1.3 kW Noise measurement: Sound pressure level approx. 64 dB(A) Refrigerant: ( converted to R-452a ) weight: approx. 960 kg Type: WT11-1000/70/5 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. function check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Lukas, hydraulic pump hand pump -Type: ZPH 2A/5 -Pressure range: max. 500 bar -Quantity: 1x hand pump available Hsdpfx Aswwqwusg Nenu -Dimensions: 900/300/H200 mm -Weight: 15 kg

Condition: excellent (used), Here we offer a climatic test chamber. Air cooled Nominal test chamber volume: 280 liters Dimensions Test chamber outside: 1500 x 2040 x 1075 mm Fan motor and door disassembled: 1500 x 1940 x 925 mm test chamber: 720 x 690 x 560 mm door, clear width: 720 x 690 mm viewing window, heated: 500 x 600 mm Temperature range +5 to +100 C heating: 4,0 K /min Cooling: 0.6 K /min Hjdpsiz Tqcsfx Ag Njnu Climate range +10 to +95 C Humidity range: 10 to 95 % r.H. Humidity difference, temporal: ≤ ± 3.0 Water connection humidifier: city water or distilled water 20l reservoir tank. Mains connection: 400 V 3/N/PE, AC, 50 Hz Power requirement max : 6,3 kW Weight : 500 Kg Type : 3416/16 Refrigerant : R134a For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.