Lathe - cycle controled

MONFORTS KNC 5 x 1500

Condition: good (used), Year of construction: 1997, Technically in good condition and functional. Year of manufacture 1997. Nwodpfx Adewn Dbnj Hjp Max. turning diameter 250 mm. Max. diameter over bed 530 mm. Max. turning length 500 mm. Length x Width x Height approx. 3315 mm, 1895 mm, 1900 mm. Machine weight approx. 6 tons.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, spindle bore: 83 mm, turning length: 1,000 mm, turning diameter: 570 mm, turning diameter over top slide: 340 mm, quill diameter: 80 mm, quill travel distance: 200 mm, overall weight: 3,200 kg, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, The machine is in very good condition. Immediately available! Can be tested under power. Nwodpfewxw S Isx Ad Hsp

Condition: good (used), Year of construction: 2007, turning length: 1,065 mm, turning diameter: 470 mm, Chip conveyor SMW 315 3 chuck 2 x Radial live tooling holders 2 x Axial live tooling holders Spindle bore 80 mm BMT-Tooling system Tool measuring probe Spindle hours 6960 / 6270 Running hours Max. turning Ø: 470mm X-Axis: 260mm Z-Axis: 1065mm Spindle bore: 80mm Speedrange: 4200Rpm Nodpswq Rpwsfx Ad Howp Spindle power: 30kW ATC / revolver: 12 BMT Tool system Speed live tools:6000Rpm Power live tools:7,1kW Length: 3310mm Width: 1900mm Height: 1970mm Weight: 6100kg

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 850 mm turning dia. over face-slide: 580 mm turning length: 4000 mm centre distance: 4000 mm faceplate diameter: 800 mm control: Siemens 810D revolution per minute: 1 - 1600 / 2 step U/min max. torque on the spindle: 6000 Nm feed motor: X= plan + Z= längs: 16000 / 20000 N rapid motion - x-axis: 4 m/min rapid motion - y-axis: 7 m/min spindle passage: 130 (Spindelkopf DIN 55027 Gr. 11) mm operating hours - idle run: werden noch ausgelesen h tailstock taper ISO: MK 6 tailstock quill stroke: 350 mm max. workpiece weight between centers: 5000 kg max. workpiece weight -without tailstock: 1800 kg interface: RS 232 / V24 voltage: 400 V / 50Hz V control voltage: 24 V Gleichstrom V total power requirement: ca. 52 kW Weight approx.: 14,0 t dimension machine xH: 2,6 x 9,1 x 2,5 m Cycle lathe with Siemens cycle control Motor: 37kW, rated speed 1500 rpm; max. speed 6500 rpm; torque 235 Nm Two gear shift stages Stage II: Spindle torque 258.9 to 1364.6 Nm Stage I: Spindle torque 1050.4 - 5536.1 Nm Feed drive Three-phase servo drive Nwedpfx Aou Ix Izod Hop 2x chip conveyor Double E-cabinet Quick-change steel holder parat Coolant device incl. various accessories see photo, as well as steady rest and 3-jaw chuck Ø 500mm Rota-S plus *

Condition: used, Year of construction: 2006, functionality: fully functional, turning length: 780 mm, turning diameter: 270 mm, spindle motor power: 15 W, travel distance X-axis: 195 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 780 mm, Nakamura-Tome WT-300 CNC Lathe Year of manufacture: 2006 CNC Control: FANUC Series 18i-TB Machine weight: 12,000 kg Machine dimensions: Length: 5,230 mm Width: 2,500 mm Height: 2,300 mm Machining capacities: Njdswx Hicepfx Ad Hswp Max swing diameter over upper/lower carriage: Ø 310 mm (upper and lower) Distance between spindles (min - max): 120 mm – 1,200 mm Max turning diameter, main spindle/sub-spindle: Ø 270 mm Max turning length: 780 mm Spindle/bar capacity, main spindle/sub-spindle: Ø 65 mm Axis travels: X1 / X2 Axis: 195 mm Y Axis: 120 mm (±60 mm) Z1 / Z2 Axis: 780 mm B Axis: 850 mm C Axis: 360° (continuous) Main spindle and sub-spindle: Spindle speed: 50 – 4,500 rpm Spindle nose: ASA A2-6 Chuck diameter: Ø 225 mm Minimum programmable C-axis increment: 0.001° Motor power (cont. / 30 min.): 11/15 kW (both spindles) Turret No. 1 & No. 2 (identical): Static/tooling stations: 24 stations (12 live tooling) Live tooling speed: 3,600 rpm Live tooling motor power: 3.7 / 5.5 kW Turning/boring tool size: 25×25 mm / Ø 32 mm Rapid traverse rates: X1 / X2 / Y Axis: 16,000 mm/min Z1 / Z2 Axis: 24,000 mm/min B Axis: 36,000 mm/min C Axis: 100 rpm B Axis: 27,000 mm/min Included accessories: LNS bar feeder model MOVE (length capacity 2,300 mm) Chip conveyor Coolant collection tank with wash-down pump High-pressure pump with external coolant tank Various fixed and driven tool holders Tool presetting arm with dual-head RENISHAW interface Part unloading arm Manuals, electrical diagrams, and EC Declaration

Condition: used, Year of construction: 1987, Lead and draw spindle lathe Make: Boehringer Model: DUE 560 Year of manufacture: 1987 used Nwedetud S Uepfx Ad Hsp Technical data: turning diameter 250 mm turning length approx. 1200 mm Rotation Ø over bed 560 mm Rotation Ø over facing slide 365 mm Max. workpiece between the centers 500-800 kg Spindle diameter in front bearing 100 mm Spindle bore 62 mm Spindle head DIN 55022 No. 8 Travel Face slide travel 345 mm Top slide travel 125 mm Tailstock/pinsØ 80 mm Tailstock holder MK 5 Quill stroke 190 mm Longitudinal feed 60 x 0.0315-28 mm/1 Face feeds 60 x 0.016-14 mm/1 Tapping capacity 0.125-112 mm Total power requirement 20 kW Space requirement approx. 3.5x2.0x2.2 m Weight: approx. 2.5 tons

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min Nsdpfxofg E Hlo Ad Hewp table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: used, Year of construction: 1968, faceplate diameter 1000 mm turning diameter over slide rest 1200 mm centre distance 1500 mm Njdpfxjwhqzzs Ad Hewp bed indentation . weight of the machine ca. 6 t

Condition: used, Year of construction: 1969, rotary table diameter 1000 mm grinding height 500 mm grinding head - power requirement 15/5,5 kW total power requirement 30 kW weight of the machine ca. 18 t dimensions of the machine ca. m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _____ Njdpfx Aou Su Apjd Hewp Max workpiece Ø 1,000 mm Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx. 1,000 mm Table speeds, hydraulic, infinitely variable, right/left 5 – 60 rpm Table/workpiece infeed, 5 steps 0.0025 – 0.025 mm/stroke Table stroke approx. 500 mm Distance between grinding spindle and machine body 600 mm Surface Grinding Head Ø (Segmented wheel) 450 mm Grinding slides stroke, max. 500 mm Grinding slide speeds, infinitely variable 0.2 – 1 m/m Max. Internal Grinding spindle Ø 140/100 mm Grinding cup wheel Ø, up to approx. 200 mm Motor for Surface Grinding 15 kW / Motor for Internal Grinding Spindle 5,5 kW Total electrical load, approx. 30 kW - 380 V - 50 Hz Weight, approx. 18,000 kg Accessories / Special Features • The rotary table carries the workpiece and is also actuating the automatic grinding infeed • The relevant Grinding head can be swivelled in by turning the Column (hydraulic lift) so the workpieces can be ground in one setting with exact angles. • Built-on magnetic face plate, Ø approx. 1,000 mm, with 5 T-slots and stepless adjustment for the magnetism • Automatic workpiece infeed, with automatic depth stop. • Separate Height adjustment of internal grinding head, Grinding spindle Ø 100 mm. • Dressing devices mounted on each grinding head, Separate Switch Cabinet and hydraulic unit, • No Coolant Device available This machine is ideal for grinding bulky and heavy workpieces like housings, gears (!) bearing rings, cylindrical knives, etc. Condition: Good. Machine can be inspected soon under power Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.

Condition: good (used), Year of construction: 1990, 1 used surface grinding machine make Rosa type ER 10 year of construction 1990 Technical data Travel 1000 x 600 mm Magnetic plate 1000 x 600 mm maximum sanding height 400 mm longitudinal speed 2-30 m/min Transverse speed infinitely variable 0-3 m/min Sanding spindle speed 1450 rpm Grinding wheel diameter 400 x 60 x 127 mm Grinding wheel motor power 7.4 KW Dimensions 3900 x 20 50 x 2400 mm Weight 6 tons Nwjdeuuik Sspfx Ad Hep