Used Acoustic Enclosures for sale (1,769)

Condition: ready for operation (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 1.302.981, overall weight: 280 kg, load capacity: 20 kg, arm reach: 1,813 mm, controller model: KR C4 NA UL, No minimum price – guaranteed sale to the highest bidder! The offer includes only the robot without the enclosure! The enclosure can be purchased separately for an additional €3,500! TECHNICAL DETAILS Payload: 20 kg Reach: 1,813 mm MACHINE DETAILS Controller: KR C4 NA UL Total weight: 280 kg Operating hours: approx. 500 hours Bdjdpfx Alezvmm Tj Ujg EQUIPMENT Teach pendant (manual control) Safety enclosure with Siemens PLC 2 × SICK laser scanners 4 × Light curtains

Condition: excellent (used), Year of construction: 2019, operating hours: 21,500 h, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 340 mm, travel distance Z-axis: 355 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece length (max.): 470 mm, workpiece width (max.): 400 mm, workpiece weight (max.): 500 kg, total height: 2,431 mm, total length: 2,069 mm, total width: 2,328 mm, table load: 500 kg, spindle speed (max.): 42,000 rpm, operating hours of spindle: 9,500 h, distance table to spindle center: 495 mm, spindle motor power: 13,000 W, number of spindles: 1, number of slots in tool magazine: 16, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, Milling spindle HVC140 HSK-E40 - Milling power S1/S6 40%: 10kW/13kW. Ceramic ball bearings with minimum oil air lubrication. Tool Changer 16 positions for HSK40E (tools until diam. 16 mm and maximum length of 75 mm. Tool measurement with Blum laser (annex on the left) with lasersystemm including tool breakage control. For measurment rotating tools of dia. 0,2 mm by dia. 16mm in the machine. Minimum tool length 45 mm. Tool presenting lapse. Preparation for graphite- extraction L-CUT for vacuum extraction system, consisting of enclosure, roof and pipe union. Graphite extration system. Included preparation for graphite extraction. Air throughput rate approx. 1400 m3/h. Motor output 2,2 kW, noise level approx. 73 dB (A). Rest dust content in exhaus air= max. 0,5 mg/m3. Dust contents are 15 times lower than the MAK values. Sound absorber fo L-CUT. Reducing of acoustic pressure level for approx. 9 dB (A) Remote control Heidenhain. Manual control with setup functions, electric hand wheel and enable button. Cooling system Hydac for spindle. Automatic lubrication system. Additional LED workroom lamp. Oil mist lubrication unit. Language English (system) Infrared probe Renishaw OMP 400 HSK 40 Bsdozpybwopfx Al Uodg The machine will be disconnected and dismantled on 16 September 2026. Until then, it will remain connected and in active production. In July 2026, the ball screws, including the bearings, were replaced on the X and Y axes. All spindle filters and oil were also replaced. Our company is an authorized Exeron dealer and service partner. Therefore, the machine will be professionally disconnected and prepared for transport. The price also includes professional loading onto the truck and securing the machine on the truck for transport. The machine dimensions do not include the graphite extraction system. The complete layout is provided in the attached document.

Year of construction: 2026, operating hours: 20 h, condition: like new (used), functionality: fully functional, PE30 Commercial Chocolate Enrobing & Cooling Line – 30kg Tank – 2.7m Cooling Tunnel – Almost New We are selling our complete PE30 chocolate enrobing and cooling line following the closure of our recently launched protein bar production facility in London. The equipment was purchased new specifically for our own production and only went into operation around March 2026. Since then, approximately 25,000 chocolate-coated protein bars have passed through the line, so it has had relatively light commercial use and remains in excellent condition. The equipment is being sold solely due to the closure of our production facility for business and financial reasons – not because of any fault with the machinery. Complete system includes: Bdodozx D Dbjpfx Al Usg PE30 chocolate melting & enrobing machine 30kg chocolate melting/holding tank Chocolate enrobing section with stainless-steel mesh conveyor Custom-made acrylic enclosure/cover for improved temperature stability around the chocolate 2.7m refrigerated cooling tunnel Food-grade PU cooling conveyor Copeland compressor External ventilation/extraction fan Associated components supplied with the system The custom acrylic cover was purchased separately and designed specifically for our machine to help maintain a more controlled temperature around the chocolate during enrobing. It is included in the sale. PE30 specifications Manufacturer: Anhui Dixin Machinery Technology Co., Ltd. Model: PE30 Capacity: 30kg Power: 220V / 1 Phase / 50Hz, 1.8kW Material: SUS304 stainless steel Working speed: 2m/min Mesh: 200 × 1000mm Belt: 200 × 1200mm Dimensions: approx. 1230 × 850 × 1450mm 2.7m cooling tunnel SUS304 stainless steel Food-grade PU belt 200mm × 2700mm belt 220V / 1 Phase / 50Hz 2.8kW Copeland 2HP compressor Temperature capability down to approx. -15°C Dimensions: approx. 2800 × 850 × 1380mm Weight: approx. 220kg These technical specifications are taken from the original manufacturer's documentation. The system also includes a ventilation fan intended to be installed/vented outside the production area. We used the line for premium chocolate-coated protein bars, but it can also be suitable for energy/nutrition bars, confectionery, biscuits, bakery products and other chocolate-coated products. The manufacturer also specifies the cooling tunnel for a range of food applications. The machine is currently located in Wimbledon, London, UK. Inspection can be arranged, and videos of the equipment operating can be provided to serious buyers. We are also selling other equipment from our protein bar production facility, including protein bar extrusion/forming machinery, chocolate processing equipment, flow-wrapping machines, mixers and stainless-steel production equipment. Machines can be purchased individually or as part of a complete protein/energy bar production line. Collection from Wimbledon, London. Buyer to arrange suitable transport and installation unless otherwise agreed.

Condition: new, Year of construction: 2026, DCV8900TC VIBER Industrial Dust Collector – Advanced Extraction System with Automatic Filter Cleaning The DCV8900TC VIBER is a modern industrial dust extraction system designed for intensive operation in professional woodworking plants and industrial production facilities. Combining advanced technology with maximum efficiency, it ensures stable extraction performance while reducing noise and vibration levels. The integrated VIBER automatic filter cleaning system minimizes maintenance requirements and maximizes operational reliability. Key advantages VIBER system – automatic filter shaking and cleaning without interrupting operation. TC acoustic enclosure – effective noise insulation and vibration reduction. DAMAGE PROTECT system – mechanical protection against the intake of hard foreign objects. REHEAT heat recovery system – recovers heat from exhausted air, improving energy efficiency. High airflow capacity of 8,900 m³/h – designed for large industrial facilities. High airtightness construction – cleaner air and reduced heat loss inside the production hall. Construction and technology The extraction unit is equipped with a reinforced metal impeller that is dynamically balanced to ensure stable, quiet, and reliable operation. The fan blade geometry has been optimized for maximum suction efficiency and reduced energy consumption. The integrated REHEAT system enables recovery of thermal energy from discharged air, significantly lowering operating costs and improving the overall efficiency of the ventilation system. Precision and performance The DCV8900TC VIBER maintains a constant suction velocity of 28–32 m/s, even when operating with multiple machines simultaneously. Polyester filters with a filtration accuracy of up to 5 microns, with the option of installing HEPA filters, ensure excellent air quality in demanding industrial environments. The automatic filter cleaning system maintains consistent airflow performance and reduces downtime associated with manual maintenance. Applications The DCV8900TC VIBER is designed for large-scale woodworking, furniture manufacturing, and industrial production facilities. It is ideal for extraction from machines such as: edge banding machines sanding machines panel saws format saws CNC woodworking equipment The unit works perfectly as a central dust extraction system for multiple production stations operating simultaneously. Standard equipment Automatic VIBER filter cleaning system TC acoustic insulated enclosure REHEAT heat recovery system DAMAGE PROTECT protection system Control cabinet Metal waste containers (500 L) Polyester filter cartridges Optional equipment HEPA filter system Additional air distribution system Ceiling-mounted extraction connections Technical specifications Parameter Value Motor power 7.5 kW / 400 V, 50 Hz Motor speed 3,000 rpm Extraction capacity 8,900 m³/h Maximum vacuum pressure 3,000 Pa Noise level 80 dB Suction inlet diameter 300 mm Air velocity 28–32 m/s Filter surface area 20 m² Filter material Polyester, 5 microns / filter category "G" Number of filters 45 Dimensions (L × W × H) 2400 × 1170 × 2240 mm Bedpfx Ajudaazel Ujdg Weight 500 kg

Condition: used, machine/vehicle number: 161/93, Rye 40 SM Speedmax is a heavy-duty, automatic rotary shaper / rotary profile milling machine. It is designed for high-volume production and profiling of solid wood and wood-based components. The British manufacturer, Rye Machinery Limited, was a renowned supplier of specialized machinery for the furniture and joinery industries. Electrical Specifications • Supply Volts: 380 V AC (three-phase power supply) • Control Volts: 110 / 240 V AC • Auxiliary Volts: F-215 / A15-180 • Frequency: 50 Hz • Phases: 3 • Full Load Current (F.L.C. Amps): 49.0 A • Machine No.: 161-93 • Wiring Diagram: A3-ER80/031 Technical and Functional Overview The Speedmax series of rotary shapers was engineered to minimize setup times and deliver maximum throughput for profiled components (e.g., chair parts, table tops, furniture fronts): • Rotary Table Design: Features a central, continuously rotating worktable. The operator can safely load and unload components on one side while the shaping heads machine the material on the opposite side. • Machining Heads: Equipped with pneumatic, heavy-duty shaping spindles that follow a master template to accurately reproduce complex, curved profiles. Bdsdpfxjzfh Svs Al Ueg • Safety & Enclosure: The machine includes a comprehensive acoustic enclosure and safety guarding. This protects the operator from chips, dust, and moving spindles while significantly reducing workshop noise. • Dust Extraction: Outfitted with dedicated extraction hoods integrated near the work heads for efficient chip removal.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 11,298 h, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of September 21st to October 1st! TECHNICAL DETAILS Travel in X-axis: 700 mm Travel in Y-axis: 550 mm Travel in Z-axis: 450 mm Feed Axes Max. travel speed X, Y, and Z axes: 30 m/min Max. acceleration X, Y, and Z axes: 15 m/s² Positional accuracy TP according to DIN ISO 230-2: 0.005 mm Repeatability: 0.002 mm Work Table Table length: 850 mm Table width: 700 mm Number of T-slots: 5 T-slot dimensions: 18 H12 Table load: 2,000 kg Max. workpiece weight: 2,000 kg Distance spindle center – table: 550 mm Spindle Spindle mount: HSK-E 40 Spindle speed: 3,000 - 42,000 rpm Spindle power: 17 kW Tool Changer Tool magazine positions: 40 MACHINE DETAILS Machine type: CNC HSC machining center CNC control: Andronic Electrical Connection Data Bdsdszqupxjpfx Al Ujg Supply voltage: 400 V Supply frequency: 50 Hz Fuse rating: 32 A (?) Dimensions and Weight Overall length: 3,300 mm Overall width: 2,300 mm Overall height: 2,300 mm Overall weight: 7,700 kg Operating Data Machine operating time: 275 d 5 h 13 min 39 s Spindle operating time: 11,297 h 20 min 11 s EQUIPMENT - Full enclosure - Dust and fluid-proof guides - Oil mist extraction - Compressor cooler - Frequency inverter - Heidenhain glass scales in X, Y, and Z axes - Work light in the interior - Technical documentation - Workbench - HSK-E-40 tool holders - Tools - Workbench dimensions: approx. 1,500 × 900 × 1,100 mm External Reference: Demo - Lot 2

Condition: used, This listing is for the J Engelsmann Jolting Volumeter STAV 11 with an Acoustic Hood The unit is in full working condition and is ready for immediate use Engelsmann Jolting Volumeter STAV 11) — a compact laboratory instrument used to assess the tamped density and volumes of bulk solids before and after compaction. The Jolting Volumeter STAV II, produced by J. Engelsmann AG, is a laboratory device engineered to measure the apparent (pre-compaction) and tapped (post-compaction) volumes of bulk materials—such as powders, granulates, and fibrous products—thus enabling calculation of tamped or tapped density Compliance with standards: Supports analysis in line with European Pharmacopoeia, DIN ISO 787 Part 11, ISO 3953, ISO 8967, and ASTM B 527-93 Adjustable tamping mechanism: Allows custom setting of the number of jolting strokes deviating from default programs Bdodpfxjxhdyno Al Usg Measurement cylinders: Compatible with a range from 10 ml to 1000 ml, with 250 ml typically standard; cylinders are interchangeable and secured via a strong retaining ring and gasket Ease of use and cleaning: Designed with a modern, rounded “soft design” that’s easy to clean and operate via a user-friendly display and control unit Optional accessories: Can be fitted with a sound-absorption hood for quieter operation

Year of construction: 2021, condition: excellent (used), 2021 Versa Tech Enterprise Soundproof Welding Room/Acoustic Welding Enclosure Consisting of: 1. 1st Enclosure 3 Twin Door Soundproof Welding/Assembly Booths Dimensions (2) W3,000 x D4,000 x H2,700mm & W4,000 x D4,000 x H2,700mm With Donaldson Torit Extraction Unit Dimension W1,399 x D1,284mm. 2. 2nd Enclosure 2 Assembly Soundproof Booths Dimensions W4,800 x D4,000 x H2,700mm & W2,800 x D4,000 x H2,700mm With Donaldson Torit Extraction Unit Dimension W1,399 x D1,284mm. 3. 3rd Enclosure 2 Soundproof Welding/Assembly Booths Dimensions W2,500 x D2,500 x H2,700mm & W4,200 x D2,500 x H2,700mm With Donaldson Torit Extraction Unit Dimension W1,399 x D1,284mm. 4. 4th Enclosure 3 Twin Door Soundproof Welding Booths Dimensions (2) W2,000 x D2,500 x H2,700mm & W3,000 x D2,500 x H2,700mm With Donaldson Torit Extraction Unit Dimension W1,319 x D1,284mm. 5. 5th Enclosure 6 Twin Door Soundproof Welding Booths Dimensions (5) W2,000 x D2,500 x H2,700mm & W3,000 x D2,500 x H2,700mm With Donaldson Torit Extraction Unit Dimension W1,119 x D1,284mm. Please see document attached for more details. Bdodpfxezk Dw Es Al Ueg

Condition: ready for operation (used), Year of construction: 1981, WEINIG Hydromat H25R, S/N 2603-624, year of manufacture 1981, with walk-in acoustic enclosure KASCHWIG – ALMOST NEW from 2017 • Short infeed table with heavy-duty 6-roller infeed 1st spindle bottom 11.0 kW Bdedpfx Alotkt Tpo Ueg 2nd spindle right 11.0 kW 3rd spindle left 11.0 kW 4th spindle top 15.0 kW 5th spindle bottom 11.0 kW 6th spindle bottom 11.0 kW • Hydraulic feed 6-60 m/min. • Feed motor 22.0 kW • 4x powered table rollers • Spindle diameter 50 mm • Automatic table lubrication • Spindles 1 + 4 + 5 + 6 with counter-bearings • Spindles 1 + 4 with straight jointer • Feed rollers 170 mm • 4 pcs. hydro planer heads 150 mm • 6 pcs. hydro planer heads 250 mm • Extraction hood above the machine

Condition: used, mileage: 20,000 km, power: 353 kW (479.95 HP), first registration: 11/2025, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: semi-automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ Internal number: #568 Mercedes Benz Arocs 2548 6x2 L with KROLL High-Pressure Flushing and Suction Pressure Tank Superstructure ADR Type K 14.0 / 28 PE This Mercedes-Benz Arocs 2548 6x2 L is equipped with a premium KROLL high-pressure flushing and suction pressure tank superstructure of ADR class L4BH. Featuring a telescopic DN125 boom, VacuStar 1600, Uraca KD718 G60, and full CAN-BUS control, the vehicle delivers maximum performance for sewer, industrial, and hazardous goods operations. Body * KROLL Fahrzeugbau-Umwelttechnik GmbH * HOSE STORAGE CASSETTE WITH TELESCOPIC BOOM DN 125 * Reach on anchoring side: 4,600 mm * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tank vehicle Type K 14.0 / 28 PE * Sliding piston with 3 locking positions * (3,300l water/10,600l sludge, 5,500l water/8,200l sludge, 7,700l water/6,000l sludge) * Suction from open water possible "comfort version" via cassette boom with integrated filter * Tanker equipment according to ADR – type class AT/FL L4BH * DISCHARGE: via pneumatically actuated piston * SLUDGE WATER OUTLET DN 80: for returning dirty water via the boom into the sewer * Manhole DN500 Chassis – Mercedes Benz Arocs 2548 L * 6x2 * Automatic transmission * 480 hp / 350 kW * EURO 6e * Fuel volume approx. 350 l * Cab color MB9147 Arctic White * 2x LED beacon lights on cab * Rear view camera * Navigation * Air conditioning Vacuum system * CVS VacuStar 1600 approx. 1,550 m³/h at 400 bar * Drive: via drive shafts, V-belts, and pneumatically operated friction clutch from PTO * Approx. 20 m HP hose DN 125 * HOSE STORAGE CASSETTE WITH TELESCOPIC BOOM DN 125 * Reach on anchoring side: 4,600 mm * Additional suction hose reel with through-suction, rear right, approx. 30 m DN75 suction hose High-pressure system * Uraca KD 718 G60 approx. 315 l/min at 170 bar * Drive: via drive shafts, V-belts, and pneumatically operated friction clutch Bodpfx Aex Egyfsl Ujdg * Approx. 240 m HP hose DN 25 * Large HP hose reel for 240 m 1" DN 25, 180° swiveling * Fitted with 160 m DN25 (rubber hose) * Small HP hose reel for 60 m ?? DN 13, hydraulic * Fitted with 60 m DN13 (rubber hose) Features of the hose storage cassette with telescopic boom DN 125 * Infinitely variable height adjustment of the suction hose hydraulically via roller guide carriage * Boom arm for suction hose hydraulically adjustable, telescopic, and swiveling 180° * ADR version L4BH type class FL including EX/II, EX/III, and AT * Spray gun * LED beacon lights * LED perimeter lighting * Remote control of work functions via CAN-BUS technology * Remote control with 14 functions * Hand wash unit (warm) * Rear view camera * Acoustic enclosure in front of pump compartment * Large equipment box * Tool box * Holder for traffic cones * Vice * Ladder * Large advertising boards left and right * Scrap box Technical Data GVW 26,000 KG * Unladen weight approx. 18,760 KG * Length approx. 9,280 mm * Height approx. 3,820 mm * Width approx. 2,550 mm * Wheelbase 3,900 mm Conclusion An excellently equipped Mercedes-Benz Arocs 2548 with KROLL combination superstructure, telescopic DN125 boom, VacuStar 1600, Uraca KD718 G60, and ADR L4BH. The ideal solution for sewer service contractors, industry, municipalities, and service providers seeking a powerful, ready-to-use professional vehicle. For further d

Condition: not inspected (used), Industrial enclosure Previously used as a measuring room Completely enclosed industrial enclosure Dimensions Bodpfozilmxjx Al Ujdg Roller shutter door approx. 3500 × 2960 × 2960 mm Complete enclosure approx. 22,000 × 15,000 × 9,000 mm Lifting equipment ABUS overhead crane Load capacity: 1 ton Ventilation and air conditioning system 2 outdoor units from Mitsubishi Electric Mitsubishi Unit 1 Type: PUZ-M125VKA2 Year of manufacture: 2022 Mitsubishi Unit 2 Type: PUZ-M125VKA2 Year of manufacture: 2022

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, controller model: Siemens 840 D, table diameter: 1,220 mm, TECHNICAL DETAILS Table diameter: 1,220 mm Max. turning diameter: 1,500 mm Max. height under the cross beam: 900/1,200 mm Saddle travel, X-axis: 1,000 mm Table speed range: 4.5 to 100 RPM Feed rate range: 0.127 to 6.35 mm/rev Tool changer: 30 positions MACHINE DETAILS Control system: Siemens 840 D Main drive motor: 41 kW Bdsdezuy Eaepfx Al Ujg EQUIPMENT 8 clamping jaws 30 tool holders Full enclosure Mist extraction system

Condition: used, Safop Leonard-90TT/CNC horizontal axis turning lathe Bodpfezwmw Usx Al Uodg Model Leonard-90TT/CNC 70 ton capacity 1750mm swing 9000mm between centres Twin saddle Hydrostatic bed 1700mm diameter 8-jaw chuck Siemens Sinumerik 840 DSL controls Date of manufacture: 2013 Serial No. 3432 Swarf conveyor Safety enclosure Quantity of tooling Euro cold twin fan chiller

Condition: used, Safop Leonard 70 CNC Roll Turning 30 ton capacity 1000mm Swing 6000mm between centres Twin saddle Hydrostatic bed 1000mm 4-jaw chuck Powered tailstock Swarf conveyor (2) Fume extraction cabinets Bdjdezwmkhopfx Al Ujg EATA chiller safety enclosure Siemens Sinumerik 840c controls Date of manufacture: 2000 Serial No. 5298

Condition: new, mileage: 500 km, power: 350 kW (475.87 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ Bdodsyawvzspfx Al Ueg Internal number: #550 Mercedes-Benz Arocs 6x2 L with combined high-pressure flushing and suction pressure tank body with water recovery, KROLL Type K 1.0-13.0/29 P Body by KROLL Fahrzeugbau-Umwelttechnik GmbH * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Reach on pivot side 5,200 mm * Tank material S355J2+N (St. 52.3) * Water recovery unit * Sliding piston with 3 locking positions * (3,300 l water / 10,600 l sludge, 5,500 l water / 8,200 l sludge, 7,700 l water / 6,000 l sludge) * Suction from open water sources possible - "comfort version" via cassette boom with integrated filter * DISCHARGE: by pneumatically operated piston * SLUDGE WATER DRAIN DN 80: for backflowing dirty water over the boom into the sewer * Manhole DN500 Chassis Mercedes-Benz Arocs * 2548 L 6x4 * Powershift 3 * 476 HP / 350 kW * EURO 6e * Fuel capacity 510 l * Driver’s cab color MB 9147 Arctic White * 2x LED beacon lights on cab * Rearview camera * Navigation system * Air conditioning Vacuum system * Samson Truck Master 2,500 ca. 2,465 m³/h at 400 bar * Drive: elastic, via drive shafts, V-belts and pneumatically actuated friction clutch from the vehicle engine PTO * Approx. 20 m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Reach on pivot side 5,200 mm * Additional suction hose reel with suction on rear right with approx. 30 m DN80 suction hose High-pressure system * Uraca P 3-45 approx. 345 l/min at 205 bar * Drive: elastic, via drive shafts, V-belts and pneumatically actuated friction clutch * Approx. 240 m HD hose DN 25 * Large HD hose reel for 240 m, 1” DN 25, swiveling 180° * Equipped with 240 m DN25 * Small HD hose reel for 80 m DN 13, hydraulically operated * Equipped with 60 m DN13 Features * Hose storage cassette with telescopic boom DN 125 * Stepless height adjustment of suction hose, hydraulically via roller guide trolley * Boom arm for suction hose hydraulically operated, telescopic, and swivels 180° * KROLL water recovery system WRS1 with self-cleaning function * Pressure-speed control * Spray gun * LED beacons * LED perimeter lighting * Remote control of working functions via CAN-BUS technology * CAN wireless remote control * Hand-wash unit (hot water) * Rearview camera with 7” color monitor incl. day/night switch * Acoustic enclosure in pump area * WATER SHORTAGE WARNING SYSTEM: with buzzer in main control cabinet and automatic pump cut-off * RESIDUAL WATER DRAINAGE: pneumatically operated for all water-carrying components, with connection to truck compressed air system * Large equipment box and hose trays * Toolbox * Holder for traffic cones * Vice * Ladder * Electric cable winch * Mount for fall protection device * Pulley for banana/guide device * Large advertising boards right and left * Manhole DN500 Technical data GVW 26,000 kg * Unladen weight approx. 20,700 kg * Length 9,800 mm * Height 3,890 mm * Width 2,550 mm * Wheelbase 4,200 mm For further details and/or pictures, please contact us directly. A wide selection of further vehicles for PURCHASE or RENT can be found at: Modifications, prior sale, and errors excepted. The buyer is obliged to independently ascertain the condition and equipment of the goods. Sale exclusively according to our terms and conditions and under Au...

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-240-06-8502, functionality: fully functional, power: 18 kW (24.47 HP), cutting height (max.): 95 mm, saw blade diameter: 380 mm, cutting length (max.): 4,300 mm, plate width: 2,200 mm, TECHNICAL DETAILS Cutting length: 4,300 mm Panel width: 2,200 mm Saw blade overhang: 95 mm Main saw blade diameter: max. Ø 380 mm Saw carriage feed rate: up to 150 m/min Clamping jaws: 7 pieces MACHINE DETAILS Main saw motor power: 18 kW Scoring saw motor power: 2.2 kW Operating hours: approx. 38,544 h (as of 05.10.2023) EQUIPMENT Automatic rear panel loading system Bjdezx Anxspfx Al Uedg Lift table loading system Lift table Automatic program slider with clamping jaw feed Main saw unit Scoring unit Automatic cutting length and positioning control Angle and back stop Air cushion support tables in the operator area CADmatic operating and optimization environment PICA 108 label printer Roller and transport technology in the rear loading area Safety enclosure with protective fencing Dust extraction connections with machine-side dust extraction ducting

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100264-11 / AA100264-12, travel distance X-axis: 2,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 635 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 920 mm, feed length Z-axis: 635 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Siemens, controller model: 840 D, overall weight: 28,000 kg, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 25 W, number of spindles: 2, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, BAZ and extrusion profile system for the production of car sill profiles consisting of: *Machining machines: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) - 2x coolant treatment units *Subassembly assembly (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA - Gripper for robot 1 - Labeling station - Robot 2 KUKA KR120 R3500 - Gripper for robot 2 - Interface robot/machining center - Cleaning unit for components - Assembly machine, 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station Bdjdpfxeyzh Ule Al Usg - Adhesive application station - Platform - Robot 5 - Gripper for robot 5 - Pallet placement station - Safety enclosure - Electrical control and integration Further information and videos available upon request.

Condition: new, Year of construction: 2011, functionality: fully functional, Xtralis VESDA VLF-250 very early warning aspirating smoke detector, supplied together with an Apollo XP95 three-channel input/output module in a separate enclosure. The VESDA VLF-250 continuously draws air through a connected sampling pipe network and analyses it using laser-based smoke detection. It is designed for early fire detection in small, business-critical areas of up to 250 m², including server rooms, data centres, control rooms, electrical switch rooms, telecommunications facilities and air-handling installations. The included Apollo XP95 three-channel input/output unit provides independent monitoring of three input channels and independent control of three relay outputs. It is suitable for integration with compatible Apollo XP95 and Discovery fire alarm systems. Xtralis VESDA detector Manufacturer: Xtralis Product range: VESDA LaserFocus Model: VLF-250-00 Equipment type: Aspirating smoke detector Coverage area: up to 250 m² Supply voltage: 18–30 V DC Nominal voltage: 24 V DC Current consumption: approximately 220 mA nominal Current in alarm: approximately 295 mA Sensitivity range: 0.001–0.969 dB/m Maximum sampling pipe arrangement: 1 × 25 m pipe, or 2 × 15 m branches Maximum number of sampling holes: 12 Protection rating: IP30 Approximate dimensions: 256 × 183 × 92 mm Approximate weight: 2 kg Serial number: 88013225 Manufactured: January 2011 Made in: Malaysia The VLF-250 includes programmable alarm thresholds, ultrasonic airflow sensing, AutoLearn Smoke, AutoLearn Flow, an event log and an integral status display. Apollo input/output module Manufacturer: Apollo Fire Detectors Series: XP95 Model: XP95 3 Channel Input/Output Unit Number of input channels: 3 Number of relay output channels: 3 Supply voltage: 17–28 V DC Relay contact rating: 1 A at 30 V AC Operating temperature: –20°C to +70°C Protection rating: IP54 Compatible with: Apollo XP95 and Discovery systems Made in: United Kingdom Separate enclosure included Apollo identifies part number 55000-588 as an obsolete legacy product, making this unit particularly suitable as a replacement or spare for existing XP95 installations. Bedpfx Aszliwgjl Ujdg Condition- Used.

Condition: used, Year of construction: 2019, High-performance automatic transfer switch (ATS) from the ASCO 7000 Series, designed for critical power infrastructure in data centers, hospitals, industrial facilities, and backup power systems. This is a G-design unit with a solid neutral, rated up to 1200 amps, 3-phase, with Group 5 Controller and Type 1 enclosure. Technical Specifications: Series: ASCO 7000 Series ATS Design: G-design Current Rating: Up to 1200A (model shown) Voltage: 480V Poles: 3 (Three-phase) Neutral: Solid (A) Control Module: Group 5 Controller Enclosure Type: Type 1 Frequency: 50/60 Hz Transfer Type: Automatic (Open Transition standard) Certifications: UL 1008, CE, ISO 9001 Bdjdpfx Ajw Enquel Ueg Features: Field connections via terminal block (TB) Transfer Control & Indicators on door panel Engine Start contacts, Auxiliary Circuits Alarm relays, test functions, diagnostics Fault withstand and closing ratings suitable for generator/utility configurations Compatible with bypass/isolation options (in extended models) Application Areas: Data Centers & Critical IT Healthcare & Life Safety Systems Industrial Facilities Government and Military Infrastructure Commercial Buildings with Backup Generators Condition: Used – Excellent condition, from professional environment. Units available: 8 units in stock

Condition: excellent (used), Year of construction: 2003, BOGE OL8 Piston Compressor with Acoustic Enclosure Technical specifications: Power supply: 400 V Motor power: 5.5 kW Effective output: 666 l/min Maximum pressure: 10 bar Year: 2003 The compressor is fully operational. Net price: 4,200 PLN Gross price: 5,166 PLN Bsdpfjyy R E Rjx Al Usdg Below is a link to the video.

Condition: good (used), Year of construction: 2018, Ref. -No.: 10643 Manufacturer: FERMAT Type: Gantry Year of construction: 2018 Type of control: CNC-Steuerung Control: Siemens Sinumeric Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 20000 mm Y-Travel: 7800 mm Z-Travel: 2000 mm W-Travel: 1000 mm Turning Speeds: 20000 RPM Speed work spindle: 0 - RPM Max. Torque: 3294 Nm Rapid Traverse X/Y/Z: 40000 m / min Table-Size (Lxw): 20000 x 5000 x 300 mm Power Capacity: 74 kW Headstock - (spindle diameter): 160 mm Further information: - Tool cooling - Low pressure - Tool cooling - High pressure 50 bar (6,000 liters) - Tool cooling - Oil separator - Sludge pump - Machine enclosure (CE) - Electrical - Linear measurement - Electrical - Remote diagnostics - ATC/Robot Robot 140 - Chip conveyor 2 - Operator cabin / protective screen - Electrical - HH iTNC 640 control system - Electrical - Handwheel - Electrical - Air conditioning for the distributor - Head - Type 2x UHA 0.001 Bdsdpfszx Ny Uox Al Ueg The machine can be viewed while powered on by prior arrangement.

Condition: excellent (used), functionality: fully functional, TTK FG-SYS wall-mounted digital liquid leak detection and locating panel in a lockable metal enclosure. The unit is designed for continuous monitoring and precise location of conductive liquid leaks, including water, bases and acids, when used with compatible TTK sensing cables. It is suitable for data centres, server rooms, electrical rooms, commercial buildings, industrial facilities and other critical infrastructure. The FG-SYS can identify the location of a leak to approximately 1 metre, detect cable breaks and display alarm information on the integrated LCD screen. It can monitor up to 120 sensing-cable sections across three independent circuits, with a maximum cable length of 600 metres per circuit. Main features Bodozlixqepfx Al Ujdg Manufacturer: TTK Model: FG-SYS Equipment type: Digital liquid leak detection and location panel Wall-mounted version Integrated LCD display and keypad Three independent sensing circuits Up to 40 sensing-cable sections per circuit Up to 120 sensing-cable sections in total Maximum monitored cable length: 1,800 m total Leak-location accuracy: approximately ±1 m Detection of leaks and sensing-cable breaks Audible and visual alarm indication 30-event alarm and fault history Eight configurable relay contacts Additional power-failure relay RS232 and RS422/RS485 communication JBUS/MODBUS connection for BMS integration Lockable metal enclosure The FG-SYS is compatible with TTK FG-EC and FG-AC digital sensing cables and can also support compatible analogue sensing cables through the appropriate interface boxes

Condition: excellent (used), Year of construction: 2011, operating hours: 200 h, functionality: fully functional, machine/vehicle number: C2250D5 / QSK60-G4, overall weight: 15,500 kg, fuel type: diesel, color: light blue, power: 2,000 kW (2,719.24 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 1,800 kW (2,447.32 HP), nominal power (apparent): 2,250 kVA, motor manufacturer: Stamford / CUMMINS, type of cooling: air, rotational speed (min.): 1,500 rpm, DUAL SWITCHING 50/60HZ 3 X CUMMINS Serial number 33184290 (QSK60-G4) 2,250 kVA ✔️ engine Cummins QSK60-G9 ✔️ alternator Stamford HCI 734F ✔️ year of manufacture 2010 Runtime hours 100> 75-91 hrs Iron Flag Global LIMITED (UK) is offering of four high-performance Cummins QSK60 G9 diesel generators, professionally removed from a decommissioned data centre environment for 18 years We have specialized in only full data centre decommissioning, asset recovery, and controlled removals—so equipment is handled methodically, powered down correctly, documented, and preserved for resale. The result: exceptionally stable, low-hour machines with known provenance. These units are ideally suited for data centres, hospitals, industrial plants, utilities, and other mission-critical applications where reliability is non-negotiable. Bdsdpfx Aox R Szuol Ujg Custom enclosures with all the bells and whistles! Lower than 100hrs per generators. Generator ratings (each): THERE ARE THREE UNITS IN TOTAL - ONE HAS BEEN PURCHASED. ALSO THE TWO CUMMINS CONTROL SYSTEM AND ADDITIONAL INCLUDED,. - Standby: 2,250 kva Total package capacity: - 2250 kVA standby - 2000 kVA prime 3 UNITS AVAILABLE. Key specifications: - Engine: Cummins QSK60-G9 - Alternator: Stamford HCI 734F - Voltage / Frequency: 400 V | 50 Hz 60hz - DUAL VOLTAGE ALTERNATOR - Year of manufacture: 2010 - Running hours: ~75 hours - Tier IIII - Condition: Excellent – load-bank tested, fully operational, complete documentation Included with the package: - PowerCommand 3201 + Digital Master Control (full synchronisation & paralleling) - Radiators, exhaust systems, silencers - Fuel systems - Full technical documentation, manuals, and service history - Indoor installation history (no harsh environmental exposure) Availability: - Immediately available – United Kingdom - On-site inspection or video inspection available - Global shipping and logistics support can be arranged These generators are a strong fit for projects demanding absolute reliability, long-term stability, and predictable performance. Having been removed by Iron Flag as part of a controlled data centre decommissioning, they offer confidence you do not get with unknown or distressed assets. Contact Joshua Alexander Iron Flag Global Limited

Year of construction: 2017, condition: excellent (used), Tube cutting system with optical laser mark detection The FZH Vario Flex is a fully automated tube cutting system. It is specifically designed for the precise, reliable cutting of stainless steel tubes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser mark detection. The control panel allows the user to select whether the cut is triggered mechanically (e.g., at the back of a union nut) or fully automatically via optical detection of a laser mark applied to the tube. Bdsdpfxozw Ukce Al Ueg Thanks to an integrated rotating 3-jaw cutting head and a micro-spray unit (minimum quantity lubrication), the machining process is extremely gentle on the tools. The tubes remain almost completely dry and free of heavy soiling. The entire process—from loading and clamping to cutting and unloading—is highly automated and follows a material-friendly cycle. Fully integrated labeling and traceability system: The system is designed to meet modern quality standards (Industry 4.0 / automotive). Following the cutting process, a barcode label is automatically generated, assigned, and printed to ensure seamless part traceability (tracking and system logging are directly integrated). Equipped with two separate bin discharge stations (rear-facing hatches with sliding doors), the system automatically switches to the second station when a bin is full. Finished KLT bins can be removed while the machine continues to operate, without interrupting the production cycle. Technical Data & Capacities Maximum tube length (feed): 1,000 mm Material specification: Optimized for stainless steel tubes (including those with pre-assembled union nuts or flared ends) Sensors & positioning: Optical sensors for automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feeder (for manual or automatic loading) Length adjustment: Continuously adjustable for different tube lengths via a manual handwheel Cutting method: Chip-removing sawing / rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant/lubrication system: Integrated micro-spray unit (MMS) for minimum quantity lubrication Control system: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard, and mouse Setup mode: Mobile Siemens teach-in terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety Makrolon panels Logistics / Output Integrated bin deposit station 2 separate bin output stations for rear-side removal via protected interlock systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario Flex Special features: Tubes with union nuts Diameter: Ø 6–76 mm Output length: L = 150–1,000 mm Cutting based on laser marking Wall thickness: 1 to 1.3 mm Condition: The system is in good visual and mechanical condition in excellent, clean condition. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 440 mm, total height: 1,900 mm, total length: 5,000 mm, Oy Foudila Ab is a company based in Kaskinen, Finland, with over 45 years of experience in wood handling equipment. For 15 years, we have also been active in the pallet industry and over the years have developed a wide range of machines for nailing, automatic feeding, and stacking of timber. We manufacture both standard machines and customized solutions tailored to customer requirements. DNM3500 is a flexible, compact, and efficient pneumatic nailing machine for the production of deck or stringer pallets (2-way pallets). The machine features motorized conversion for stringer channels. Its user-friendly software enables very rapid changeovers, and the machine can store settings for over 100 different deck formats and pallets. It uses Bostitch nail guns equipped with nail magazines for jumbo coils, including indicators. There are options for producing asymmetric deck/stringer pallets. The machine is fitted with flexible cassettes for boards. An acoustic enclosure provides noise reduction and ensures safe operation. The machine is operated via a 10-inch touchscreen. Beckhoff control system. Standard machine specifications: - Deck board: length 600–3500 mm, width 75–125 mm, height 16–50 mm - Stringer: length 600–1500 mm, width 50–125 mm, height 16–100 mm - Deck/stringer pallet size: length 600–3500 mm, width 600–1500 mm Capacity: - 3 decks/min (with 5 deck boards) Machine dimensions: - Length 5000 mm, width 4400 mm, height 1900 mm The machine is CE-marked. The machine can be equipped with automatic board feeding and deck/pallet stacking systems. Bdjdpfx Aoy Izbljl Usg For more information, pictures or videos, please contact us.