Used Airless Spray for sale (2,396)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total width: 2,600 mm, total length: 4,000 mm, 5 Pre-heating - WAGNER Powder Spray Booth Wagner - cleaning Wanzer S-PTG-004 Pre-heating - before spray booth - and after cleaning and Gel furnace built-in radiators, especially the dark radiators in the ovens. Preheating: Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Ask the drawing S-PTG-004 Hfsdpfx Adevy Ebhedeb built-in radiators, especially the dark radiators in the ovens. Preheating: Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here. Gel oven: Only infrared radiators from Excelitas Nobelight (formerly Heraeus Nobelight) 400 V, 15000 W, heated length = 2,900 mm with a quantity of 12 units are installed here. Additional heating by metal tube heaters is not used here. Alignment oven Only metal tube radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here. Curing oven 1 Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here. Curing oven 2 Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here.

Condition: excellent (used), Year of construction: 1999, GLATT GPCG 120 Fluidbed Dryer/Spray Granulator This universally applicable plant is designed for drying, moistening and spray granulation with batch sizes up to 420 liters. Discharging is done by means of a Glatt EL 300 lifting and discharging device with Glatt GS screening machine. Accessories: Mobile weighing Mettler Toledo and WIP plant. Hfjdovdrcaepfx Addob Manufacturer: Glatt Year of construction: 1999

Condition: good (used), Year of construction: 2022, operating hours: 1,620 h, functionality: fully functional, machine/vehicle number: A20221005, We are selling a complete Venjakob painting system, which we used for applying clear coat to sheet metal. The sheets had dimensions of 1,500 mm in width and 6,000 mm in length. The weight per piece was up to 300 kg. The system features six independently programmable spray guns. A drying tunnel is connected. The conveyor belt in the booth is equipped with a cleaning unit. Hfsdpjw E E Ausfx Addjb

Condition: new, SprayClean Front Loading Spray Washing Machines SprayClean systems are designed to clean parts automatically with pressurized hot water plus a biodegradable detergent. SprayClean machines are front loading systems and have tank heating insulation, vapour extraction and pneumatic control door as standard features. Rinsing and drying processes can also be added to this model meaning the whole process of washing, rinsing and drying can be completed in the same location. Multiple systems are controlled via PLC control in the main control panel. The SprayClean also comes with a large range of optional accessories from oil skimmers, oil separators, filtration units, tank discharge pumps, loading/unloading carts, cabin insulation and many more. Hodpod Hbp Ejfx Addsfb - Pneumatically powered vertical opening front access door - Heavy duty stainless steel mesh motor driven component basket - Integral fluid filtration system - Corrosion resistant spray jets - Chemical & corrosion resistant stainless steel pump - Microprocessor or PLC controlled - Electrical powered fluid heating - Optional double skinned fluid tanks with 20mm thick insulation

Condition: good (used), functionality: fully functional, Equipment: documentation/manual, Spray Dryer: Hfjdpoxgg Hbefx Addjb - Manufacturer: Niro Atomizer - Model: MSD - Capacity: up to 1,900 kg/h water evaporation - Design: Three-stage dryer - Drying air volume: 45,000 kg/h Evaporators/High Concentrators: - Manufacturer: GEA/Laguilharre - Throughput: 12,500 l/h Including big bag and sack emptying station Evaporator (Pre-concentrator) - Make: GEA - Model: RM20 - Capacity (feed): 20,000 l/h - Operating principle: MVR and TVR (hybrid)

Condition: as good as new (ex-display), MERKUR 40/1 AIRLESS PAINTING EQUIPMENT GRACO ON CART -Merkur 40/1 pneumatic pump, 280 b. carriage -General industry, metal, wood. -Includes hose, spray gun and nozzle. - Graco Contractor Gun - Hose 5 meters and 400 Bar - Graco Lp517 Nozzle - Second hand product that has passed a very rigorous overhaul. Hfodpfon Uttbsx Addjb - 1 year warranty. It is in a condition equivalent to that of a new product. - Free shipping on orders over 60€. - taxes not included

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Lucide spray unit Hedpfxswanaxj Addsfb 25 µm

Year of construction: 1994, condition: good (used), Working area approx. 2-080 x 1,430 mm, lateral baffles right and left, Filter area approx. 1,800 x 1,300 mm, Hfjdpfx Adepvil Tedjb 2 rows of paper volume filters approx. 650 x 1,800 mm inside fine filter G4 approx. 1.350 x 2.000 mm, air capacity 4.500 m³/h, pressure max. 500 Pa, motor 1,1 kW / 1.400 rpm.

Year of construction: 2025, condition: new, functionality: fully functional, total length: 7,000 mm, total width: 4,000 mm, total height: 3,500 mm, door opening width: 3,450 mm, door opening height: 2,780 mm, inner dimension height: 2,800 mm, inner dimension length: 6,920 mm, inner dimension width: 3,920 mm, volume flow: 30,000 m³/h, machine/vehicle number: TEC/PR/15, PRISMATEC 15 represents a new generation of spray booth systems — combining mechanical precision, modular European design, and intelligent process control powered by AI. Developed for both industrial and professional finishing environments, it ensures a stable process, exceptional energy efficiency, and consistent surface quality. Each system is fully Industry 4.0-ready, with native integration into ERP / MES / QMS / SCADA environments. Key Features - Construction & Insulation: PIR sandwich panels (walls and ceiling), galvanized 1.5 mm steel frame, aluminum doors and panels, raised grid floor and platform (300 mm) for optimal airflow and structural durability. - Ventilation: Dual NICOTRA-GEBHARDT centrifugal fans, providing balanced pressure and uniform air distribution throughout the booth. Equipped with motors ranging from 7.5 kW to 11 kW, delivering total airflow from 25 000 m³/h up to 35 000 m³/h at a static pressure of 800 Pa (for both supply and exhaust systems). - Smart Control (NVIDIA AI-Edge): 14″ industrial HMI, real-time AI algorithms for temperature, pressure, and airflow control; Gun-Idle ECO mode, predictive diagnostics, full data logging, and open API (REST) compatibility via Modbus TCP / OPC UA / MQTT. Seamless integration with ERP, MES, and QMS systems for traceability and predictive maintenance. - Thermal Monitoring (optional): AI-based infrared imaging with object recognition (YOLO), automatic heat mapping, and adaptive curing profiles for reduced energy consumption. - Lighting: Programmable Daylight LED system with precise CRI and brightness control, 45° side and ceiling fixtures ensuring shadow-free illumination. - Heating System: Stainless-steel heat exchanger (oil version) with optional gas / oil / electric sources; heating time to 60 °C ≈ 4–5 min; up to 30 % energy saving through AI-based heat recovery. - Design Details: Hidden lock system (no protruding parts) for easy cleaning, foil application, and minimal maintenance. Model Range PRISMATEC 15/18/22 (7×4 m) – compact, high-efficiency configuration for workshops and industrial applications; full AI-Edge control. LS22 / Custom Series – available upon request for robotic integration, conveyors, or multi-zone temperature control. Connectivity & Reporting Direct ERP / MES / QMS integration (open API). Automated production, energy, and quality reports with OEE / KPI dashboards. Remote diagnostics, data visualization, and cloud management via TEC NOVA AI Cloud. Compliance & Certification Fully European-built, compliant with Industry 4.0 standards. Structural and welding quality certified under EN 1090-1 and EN ISO 3834-3 (TÜV Thüringen Polska). Available Options - Infrared + AI thermal monitoring - Advanced analytics & remote support - Presets for water-based paints - ECO Gun-Idle mode - Robotic or conveyor integration Hedpfxoxv D Sge Addsfb - Multi-zone thermal control (Custom Series)

Condition: new, MSP – Manual Hand Spray Systems The MSP range of manual hand operated washing systems are made entirely from high quality stainless steel 304 and can be supplied high-pressure ump option achieving pressures of up to 60 bar. Thanks to a specially designed heavy-duty washing chamber the MSP range washes parts within a closed sealed envireonment ensuring the surrounding workplaces is kept clean, tidy and dry from pressurised water. The MSP range is enviromentally friendly by utilising alkaline aqueous biodegradable detergents and allows for effective energy consumption using a foot pedal operation that oprates the pump only when pressed. This makes the MSP a very capability unit and a must have for any workshop enviroments cleaning heavy soiled contaminants. Hsdpfx Adjh E Szmedjfb

Condition: excellent (used), functionality: fully functional, Dimensions: 4000 x 2000 mm Extraction fan power: 4 kW Hfedexvygtopfx Addjb

Condition: ready for operation (used), functionality: fully functional, power: 2.94 kW (4.00 HP), fuel type: gasoline, Marking machine: Hodpfx Ajtpxg Teddsfb - Titanium - Promark 690 - Airless pump - Honda GX120 engine, 4hp Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Year of construction: 2010, condition: like new (used), We sell: TOTAL WALTHER deluge system / sprinkler container with 13 fire fighting groups, Year of construction 2010, only short time in operation, as good as new. Plant is still completely installed, (incl. piping). The deluge system is automatically monitored for operational readiness. Monitoring centre make: TOTAL WALTHER; type: MZ382100; registration no.: G4860030. Hodpognguvjfx Addjfb Number of monitoring contacts: 41 Fully functional On-site inspection possible at any time Offer price 2010: 161.422,-€ Further documents (technical data sheets, operating instructions, etc.) can be requested on request.

Condition: ready for operation (used), machine/vehicle number: 89915, Drive = compressed air, Material/air ratio = 16:1, Hodpeiv Huwofx Addsfb Material pressure max. 90 bar, Air inlet pressure 1 to 6 bar, 4 double strokes for 1 liter of material, with gun type MX with double hose, unused since last service 01/20, condition as seen, ex stock Seevetal, subject to prior sale

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: PB-VB 1555, Equipment: cabin, Spray booth dryer VENUS model PB-VB 1555 - Internal dimensions 15.0 x 5.0 x 5.0 m - Walls protected by easily removable white lacquer - Thermal insulation of walls (mineral wool 40 mm) - Motorized aluminum entrance gate (4.8 x 5.0 m), 2 pcs. - Service door, 3 pcs. - Operator lifting grates, carrying capacity 1,100 kg/m2 - Vertical ventilation, airfall velocity ~0.3 m/s Hfodpfjt S Upnsx Addeb - Supply ventilation and heating unit (capacity 45 000 m3/h, heating power / motor power 500 / 18.5 kW), heating medium gas or fuel oil, 2 pcs. - Exhaust generator (capacity 45 000 m3/h, motor power 18.5 kW), 2 pcs. - Heat recovery rotary recuperator (efficiency >50%), including support structure, 2 pcs. Heating power with rotary recuperators is 2 x 250 kW. - Air filtration: pre-filters + ceiling filters (~67 m2). - Two-stage air filtration at the outlet: 1. inert cardboard floor filters (~45m2) - pre-filtration; 2. non-woven glass filters in exhaust units - fine cleaning - Primary overhead lighting, 20 pcs. - Additional side lighting, 17 pcs. - Control cabinet

Condition: new, SprayClean Front Loading Spray Washing Machines SprayClean systems are designed to clean parts automatically with pressurized hot water plus a biodegradable detergent. SprayClean machines are front loading systems and have tank heating insulation, vapour extraction and pneumatic control door as standard features. Rinsing and drying processes can also be added to this model meaning the whole process of washing, rinsing and drying can be completed in the same location. Multiple systems are controlled via PLC control in the main control panel. The SprayClean also comes with a large range of optional accessories from oil skimmers, oil separators, filtration units, tank discharge pumps, loading/unloading carts, cabin insulation and many more. - Pneumatically powered vertical opening front access door - Heavy duty stainless steel mesh motor driven component basket - Integral fluid filtration system - Corrosion resistant spray jets - Chemical & corrosion resistant stainless steel pump - Microprocessor or PLC controlled - Electrical powered fluid heating Hodpfe T D R Dox Addsfb - Optional double skinned fluid tanks with 20mm thick insulation

Condition: new, Year of construction: 2023, functionality: fully functional, total length: 2,500 mm, total width: 1,060 mm, total height: 1,180 mm, filter area: 2 m², negative pressure: 550 Pa, volume flow: 3,600 m³/h, FELDER FSW 2000 mobile spray wall 3x400V 50Hz, 1.1 kW, air flow rate 3600 m³/h, pressure increase 550 Pa, exhaust diameter 300 mm, outlet throttle valve D-300 mm to smooth exhaust airflow, dimensions 2500x1060x1180 mm Suitable only for water-based paints NEW including accessories as shown in the picture Hfodpfx Asw Hcp Ueddjb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2394x990x3115 mm Hjdpfx Asvz Ewfsddofb Weight 0 kg Total power requirement 2,6 kw

Condition: ready for operation (used), Year of construction: 1997, A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible. Hsdpfx Adjwydgzodsfb

Condition: new, Year of construction: 2025, We offer you: Paint wall TPW1515 Working dimensions (mm): 1500 (w) x 800 (d) x 1500 (h). Overall dimensions (mm): 1800 (w) x 1200 (d) x 2200 (h) Standard equipment: • 1,5 kW fan power, • Capacity: 8 640 m³/h, • 930 Pa compression, • Lighting: 2 x 36 W, • Explosion-proof Ex fan, • 3-stage air filtration, • Paint stop filter, Hfodpfx Adsg Sikredeb • Filter fleece, • IP 66 control panel, • IP 65 hermetic lighting. Our cabins are characterized by a very high quality of workmanship, safety of use and the selection of cab parameters to the existing building. We advise on the selection of spray booths, dedusting systems, exhaust systems and industrial recuperation. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O.. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: ready for operation (used), Rotary atomizer, nominal process gas flow rate: approx. 100 kg/h, water evaporation capacity: between 0.5 and 6 kg/h, inspection by appointment. Hedpfx Asv Edwrsddjfb

Condition: new, Year of construction: 2025, TM2015 spray booth Working dimensions (mm): 2000 (w) x 1500 (h) x 450 (d) Overall dimensions (mm): 2200 (W) x 2250 (H) Technical data: • 1,5 kW fan power, • Capacity 7600 m³/h, • 950 Pa compression, • Right or left side discharge, • 3 stage air filtration, • The degree of filtration at the level of 98%, • Explosion-proof Ex fan, • IP 66 control panel, • IP 65 hermetic lighting. Our cabins are characterized by a very high quality of workmanship, safety of use and the selection of cab parameters to the existing building. Hodpfx Aded S N S Hjdsfb We advise on the selection of spray booths, dedusting systems, exhaust systems and industrial recuperation. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: new, Year of construction: 2025, functionality: fully functional, The company BUMEX SP. Z O.O. A car wash for preparing elements before powder coating Working dimension: 1500 x 3200 x 2200mm Chemical tanks heated by oil, gas or electricity, Liquid tanks between 1500-2000l 3-stages of work, Operating temperature up to 60 degrees Celsius, Hfedpfxshfv D So Addjb Fully automatic control Pre-filter to collect impurities Made of AISI 1.4301 acid-resistant sheet metal Our devices are characterized by very high quality of workmanship, safety of use and the selection of cabin parameters to the existing building. We advise on the selection of painting booths, dust removal systems, exhaust systems and industrial heat recovery. CHOOSE BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. All products of the BUMEX SP brand. Z O.O. are EC certified. We offer our own transport - prices are determined each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please contact us.

Condition: new, Year of construction: 2025, The perfect paint set for car rims, motorcycle frames or other smaller things with a rail system and trolleys. Powder coating oven 1500 x 1500 x 1800 mm Powder coating booth 2000 x 1800 mm Oven / Dryer Technical data: Working dimension 1500 x 1500 x 1800 mm • Power consumption: 20 kW • Maximum operating temperature: 230 ° C Equipment: • Trolley inside, • Outdoor trolley, • True Fan Cooking (Equal temperature throughout the furnace), • Locks for safe opening and closing. Powder cabin: Working dimensions: 2000 x 1800 mm 2.2 kW fan power Fan capacity 10,500 m³ / h Very quiet operation Automatic filter cleaning CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Hsdped S N R Ujfx Addofb Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: new, Year of construction: 2024, Paint set: Powder coating furnace 1200 x 1500 x 1800 mm Powder coating booth 1400 x 1400 mm Complete kit for manual powder application OVEN / DRYER TECHNICAL DATA: Working dimension (mm): 1200 x 1500 x 1800, • Power consumption: 20 kW. EQUIPMENT: • Trolley inside, • Outdoor trolley, • True Fan Cooking (Equal temperature throughout the furnace), • Locks for safe opening and closing. POWDER CABIN: Working dimension (mm): 1400 x 1800, Fan power: 1,5 kW, Fan capacity: 6 500 m³/h, Very quiet operation, Automatic filter cleaning. COMPLETE KIT FOR MANUAL POWDER APPLICATION The Inocart VT manual powder application kit is ideal for the even application of powders such as polyester, epoxy or acrylic, which are delivered in 20 kg cartons. * Constant and even spraying ensuring smooth and uniform painting, * A well-balanced gun that is comfortable to use, * TEC5 technology ensuring high quality of painting finish, * 3 factory settings for quick commissioning, * 99 client settings, * Inobox height adjustment for comfortable work with the control, * Strong cascade ensuring the effect of powder curling around the detail, * High transfer efficiency minimizing the painting time, * Advanced HV control for perfect coverage of hard-to-reach parts, * Powder flow rate adjustment, * Stepless electric vibrating table, * Self-locking hook for gun and pump maintenance during cleaning, * Footrest for easy carrying of the Inocart device, * Unbeatable cascade lifetime, Hodpfx Adohd Nrajdjfb * Monitoring of wear parts for replacement in the right time. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.