Used Albert Goecker Kg for sale (70,089)

Condition: used, BPW axle used, 3 units This offer includes 3 BPW trailer axles with air suspension, type SHSF 9010‑15 ECO-P, each with a 9,000 kg axle load, approved for speeds up to 105 km/h. Gedpjx Hyfmjfx Abdjbg Net price: 300 EUR. EXW 53557 Bad Hönningen

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, We hereby offer you, subject to change, a used machine for the production of packaging cushions from old cardboard, including a suitable dust extraction system. Manufacturer cp cushion pack GmbH & Co. KG, Germany Packaging cushioning machines Type CP 422 S2i/6 Year of manufacture 2020 Drive power 1.5 kW Cushion width 420 mm Inlet height 18 mm Production output approx. 4 - 6m³/hour Working height 870 mm Feed speed 13 m/minute Motor power 1.5 kW Noise emission when idling 60 dB(A) Gbodevl Inhepfx Abdeg Noise emission during working cycle 68 dB(A) Dimensions 1010 x 660 x 660 mm (H x W x D) Weight approx. 125 kg Possible uses: With this machine you can easily make your own packaging cushions from old cardboard. This is sustainable, environmentally friendly and saves you having to buy packaging cushions. The machine was used to recycle clean cardboard cutting residues from a cutting machine. As you can see in the photos marked in red, only the green packaging cushioning machine is for sale, without a cutting machine and without conveyor technology. Note: The aforementioned technical data was taken from the operating instructions, manufacturer brochures or other sources for which we cannot guarantee their accuracy and completeness. Scope of delivery: 1 piece packaging cushioning machine cp cushion pack, type CP 422 S2i/6 We would be pleased if this machine is of interest to you. Your Mertens & Frowein GmbH service team

Condition: excellent (used), Professional workshop crane with counterweight and hydraulic drive. Very good condition, fully operational, ready for use. • Model: Hydrobull HB 500 GK • Manufacturer: E. Ziegler GmbH, Renningen (Germany) • Year of manufacture: 2004 • Lifting capacity: 500 kg • Lifting height: 280 cm • Jib length: 150 cm • Counterweight: 850 kg • Own weight: approx. 1200 kg (350 + 850 kg GG) • Outreach range: A1–A7 (240–500 kg, according to load chart) • Steel construction, mobile on industrial wheels • Hydraulic lifting and lowering of the jib • Technical and visual condition: very good Gbjdpfexmt H Ijx Abdsg

Condition: excellent (used), Bezel (28388) SPH 360 mm Gbsdpfxemkfd Ss Abdog Weight 37 kg Dimensions, see drawing

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, KG WETTER CUTTER from 2018 Gbsdpfx Ajx Ahhljbdsg AC motor Fully operational condition If you have any questions, feel free to ask!

Condition: excellent (used), Year of construction: 2018, operating hours: 28,403 h, functionality: fully functional, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 3,500 mm, total length: 5,000 mm, total width: 4,150 mm, table width: 800 mm, overall weight: 19,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 8,733 h, coolant supply: 20 bar, spindle nose: HSK 63, number of slots in tool magazine: 96, Equipment: chip conveyor, Equipment: oil mist separator, electronic handwheel, infrared workpiece measurement, BLUM tool measurement, air blast through spindle. Please send us an inquiry directly via our website if you are interested in the machine. For technical reasons, requesting a quote directly via the external platform is difficult and only possible with delays. Gbsdpfx Abex Hg Ibsdeg

Condition: good (used), TECHNICAL DATA - Main beam: IPE 600 mm (various sizes & load capacities available) - Secondary beam: Sigma 410 mm (220 & 260 mm also available) - Decking: P6 chipboard, double-sided coated, 38 mm - Load capacity: 500 - 1,000 kg / m² - Colour: RAL 9010 Pure White - Condition: used Large quantities available immediately from stock in Nordhorn. The IPE 600 allows for large spans! Scope of delivery: - Columns - Main and secondary beams - Bracing crosses - Flooring Gedpfx Aogpxf Hobdsbg PRICES: from €40.00 net per m² Prices may vary depending on design (load capacity and column spacing). Please contact our team for a consultation. Optional accessories - Handrail - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PARTNERS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist with the transport and installation of the item. Pickup is available. Delivery or shipping can be arranged for an additional charge. Additional costs depend on the delivery location and shipment size and can be quoted individually. PAYMENT TERMS Payment terms are to be agreed upon when placing an order. The price is to be understood as a unit/net price or as stated in the description (plus VAT). Naturally, you will receive an invoice with VAT shown. ABOUT US DLK, based in Nordhorn, supplies new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive terms. Please feel free to contact us with any questions. Four wins – The DLK success pillars – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 30214501, turning length: 2,000 mm, total length: 12,000 mm, WFL Millturn M60/2000 Gbedpfx Asu Hl R Tobdsg WORKING RANGE center distance mm 2000 swing over bed, turning diameter mm 690 MAIN DRIVE AC-drive with 2 gear steps drive power 100% duty cycle kW 40 max. speed min-1 3300 max. torque at the spindle 100% duty cycle Nm 1830 TAILSTOCK quill diameter mm 140 quill travel mm 160 quill force (adjustable) N 3500-31000 quill with installed live center MK 5 TOOL HOLDER (single tool holder, turning-boring-milling unit) AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 spindle diameter in front bearing mm 100 DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3

Condition: excellent (used), For sale: professional machine vises designed for operation in demanding production environments. Robust steel construction, precise guides, and a large clamping surface ensure stability and rigidity, even when machining large components. Specifications: • Weight per unit: approx. 120 kg • Large working jaw – width approx. 200 mm • Jaw opening: approx. 310 mm • Strong cast iron–steel construction • Hardened sliding guides • Ideal for large milling machines and CNC machining centers. Condition: used, fully functional, normal signs of operation. //// PRICE LISTED IS PER UNIT //// Godjw R S S Ejpfx Abdebg

Condition: excellent (used), Heavy duty wooden pallets with 3 skids accessible from 4 sides length 1680 mm width 1250 mm board thickness 45 mm weight 82,5 kg Gbedpfx Ajl Uvv Tobdeg several available

Condition: used, tank capacity: 650 l, GENERAL Design: horizontal Internal diameter: 700 mm Total length: 2,000 mm Support type: saddles Location: Bremen Volume: 650 litres Wall thickness (cylinder): 4.0 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical length: 1,580 mm Last application: chemical industry VESSEL Heads: Klöpper heads Number of supports: 2 pcs EQUIPMENT Outlet: flange DN40 Note: slight residues MATERIAL SPECIFICATION Flange material: steel Support material: wood TECHNICAL DATA / DIMENSIONS Godpfx Aoxqcg Eobdebg Wall thickness (heads): 3.0 mm

Condition: like new (used), Dough mixer With paddle Gbodpfx Aex N Efqsbdeg Kemper The machine has 2 speeds Bowl and mixer made of stainless steel Mobile unit on wheels Automatic timer Capacity: 180 liters / 120 kg of dough or 75 kg of flour

Condition: new, TECHNICAL DATA: - Base area: 5,000 x 5,000 mm [other variants available] - Grid: 5,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Flooring: Chipboard 38 mm, P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new The platforms can be extended in the specified grid as standard. Other sizes and heights are available on request. Our team will be happy to advise you! Delivery scope: - Columns - Main and secondary beams - Bracing cross-members - Flooring - Fastening materials PRICES: Variant I: Base area: 25 m² | Area: 5,000 x 5,000 mm | €2,711.50 net, plus transportation and VAT. Variant II: Base area: 50 m² | Area: 5,000 x 10,000 mm | €4,756.00 net, plus transportation and VAT. Variant III: Base area: 75 m² | Area: 5,000 x 15,000 mm | €6,659.80 net, plus transportation and VAT. Variant IV: Base area: 100 m² | Area: 5,000 x 20,000 mm | €8,662.00 net, plus transportation and VAT. Gbodpfoxdvhpox Abdog Variant V: Base area: 100 m² | Area: 10,000 x 10,000 mm | €8,381.70 net, plus transportation and VAT. Variant VI: Base area: 150 m² | Area: 10,000 x 15,000 mm | €12,162.50 net, plus transportation and VAT. Variant VII: Base area: 200 m² | Area: 10,000 x 20,000 mm | €15,136.80 net, plus transportation and VAT. Variant VIII: Base area: 300 m² | Area: 20,000 x 15,000 mm | €22,782.72 net, plus transportation and VAT. Further variants available upon request. Optional accessories: - Guardrails - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PERSONS WITH US: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & TAILOR-MADE PRODUCTION This platform system is an example from our standard range. Of course, we design and manufacture your storage platform exactly according to your operational requirements – tailored to area, load capacity, installation height, and the intended area of application. Our planning department will provide you with an individual, non-binding quotation based on your specifications. Whether for new construction, expansion, or modernisation of existing systems – we support you with sound technical expertise and practice-oriented solutions. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. The additional costs depend on the delivery location and the scope of the order and can be requested from us individually. TERMS OF PAYMENT Terms of payment are to be agreed upon in the event of an order. The price is stated per unit/excluding VAT, or as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US The company DLK in Nordhorn deals in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machines for trade, industry, and crafts. We continuously offer attractive used deals from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The success modules of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: excellent (used), Year of construction: 2023, operating hours: 1,851 h, functionality: fully functional, pressing force: 70 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 500 kg, overall weight: 17,000 kg, oil tank capacity: 70 l, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Gbedpfxsu Thbxj Abdjg Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, load capacity: 4,000 kg, lifting height: 10,000 mm, battery voltage: 48 V, empty load weight: 9,000 kg, General information: The HUBTEX 2125-PU/SO with model MQ 40 is an electric multidirectional sideloader with a load capacity of 4 tons and a cross-seat cabin. This forklift is suitable for warehouse areas where maximum flexibility and maneuverability in narrow aisles are required to handle loads of up to 4000 kg. M = Multidirectional steering Gedpfex Aqaqsx Abdebg Q = Cross-seat cabin 40 = 4,000kg 2125 = Series PU = Vulkollan tires SO = fork tilting and lowering, extendable forks to 1500mm, hydraulic fork width adjustment Additional equipment/modifications: - Camera system on the right and left of the forks, with monitor in the cabin - Positioning lasers on the right and left of the forks - Soft-stop feature when lowering the forks and when crossing the telescopic fork extension steps

Condition: like new (used), Spiral dough mixer Capacity: 100 kg of flour 160/180 kg of dough Diosna Gbjdpfx Aex N Ed Tjbdeg Container volume: 260 liters Electrical power: 380V / 50Hz / 3N/PE Two timers Two speeds Rewind option Half cover with safety switch Wheels with brakes

Condition: new, TECHNICAL DATA: - Base area: 15,000 x 24,000 mm [other variants available] - Grid spacing: 5,000 x 6,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm chipboard P6, raw/white - Load capacity: 500 kg - Colour: RAL color of your choice - Condition: new The platforms can be expanded in the specified grid as standard. Other sizes and heights are available on request. Our team is happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing cross-members - Flooring - Fastening material PRICES: Variant I: Base area: 30 m² | Dimensions: 5,000 x 6,000 mm | €4,499.65 net, plus transport costs and VAT. Variant II: Base area: 60 m² | Dimensions: 5,000 x 12,000 mm | €7,393.50 net, plus transport costs and VAT. Variant III: Base area: 90 m² | Dimensions: 5,000 x 18,000 mm | €7,303.60 net, plus transport costs and VAT. Variant IV: Base area: 120 m² | Dimensions: 5,000 x 24,000 mm | €10,513.84 net, plus transport costs and VAT. Variant V: Base area: 60 m² | Dimensions: 10,000 x 6,000 mm | €13,707.36 net, plus transport costs and VAT. Variant VI: Base area: 180 m² | Dimensions: 10,000 x 18,000 mm | €19,027.30 net, plus transport costs and VAT. Variant VII: Base area: 240 m² | Dimensions: 10,000 x 24,000 mm | €25,003.69 net, plus transport costs and VAT. Additional configurations available. Optional accessories: - Railing - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PERSONS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURING This platform system is an example from our standard range. Of course, we develop and manufacture your warehouse platform exactly according to your operational requirements – tailored to area, load-bearing capacity, platform height, and intended application. Our planning department will prepare a custom, non-binding offer for you based on your specifications. Whether new construction, extension, or modernization of existing systems – we support you with expert knowledge and practical solutions. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or shipment is available at an additional cost. The extra costs depend on the place of delivery and the size of the consignment, and can be specified individually on request. PAYMENT TERMS Payment terms will be agreed upon when placing the order. The price is to be understood as unit/net price or as stated in the description (plus VAT). You will of course receive an invoice showing VAT. ABOUT US The company DLK, located in Nordhorn, deals in new and used products for warehousing logistics, conveying technology, mezzanine floors, textile storage solutions, as well as in machinery for commerce, industry, and craft trades. Gsdoxpiztepfx Abdebg We constantly offer attractive used machines from various manufacturers/brands at competitive terms. If you have any questions, please feel free to contact us at any time. ✅ Four wins – The success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: limited functionality, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), empty load weight: 4,000 kg, volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Gjdpsu Thh Eefx Abdobg Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating ins3.641tructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Precision winding machine for films and web materials. Designed for consistent unwinding, guiding, and rewinding of roll materials. Integrated safety system with protective glazing, laser start position indicator (green), emergency stop switches, and pneumatic film guiding. Machine frame made of steel, electrically controlled drive. Ideal for production lines in coating or laminating technology. Gjdpfx Aoxzuiyjbdsbg

Condition: new, TECHNICAL DATA: - Footprint: 15,000 x 24,000 mm [other variants available] - Grid: 5,000 x 6,000 mm - Top edge of flooring: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm particle board (P6 raw/white) - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The platforms are expandable in the specified grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Delivery scope: - Columns - Primary and secondary beams - Bracing crossbars - Flooring panels - Fastening materials PRICES: Variant I: Footprint: 30 m² | Area: 5,000 x 6,000 mm | €3,598.65 net, plus transport costs and VAT. Variant II: Footprint: 60 m² | Area: 5,000 x 12,000 mm | €6,418.50 net, plus transport costs and VAT. Variant III: Footprint: 60 m² | Area: 10,000 x 6,000 mm | €6,423.45 net, plus transport costs and VAT. Variant IV: Footprint: 90 m² | Area: 5,000 x 18,000 mm | €9,104.40 net, plus transport costs and VAT. Variant V: Footprint: 120 m² | Area: 5,000 x 24,000 mm | €11,890.80 net, plus transport costs and VAT. Variant VI: Footprint: 180 m² | Area: 10,000 x 18,000 mm | €16,281.60 net, plus transport costs and VAT. Variant VII: Footprint: 240 m² | Area: 10,000 x 24,000 mm | €21,471.36 net, plus transport costs and VAT. Further variants available Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Collision guard YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURING This platform system is an example from our standard range. Of course, we design and manufacture your storage platform exactly according to your requirements – tailored to surface area, load capacity, installation height and intended area of use. Based on your specifications, our design department will prepare an individual, non-binding offer for you. Whether new construction, expansion or modernization of existing systems – we support you with expert know-how and practical solutions. Gbsdpfx Aboxpizajdog TRANSPORT & INSTALLATION We are happy to assist with the transport and installation of the goods. This item is available for collection. Delivery or shipping is available for an additional charge. Additional costs depend on the delivery location and volume of the shipment and can be quoted individually on request. PAYMENT TERMS Payment terms are to be agreed upon in case of order. The stated price is per unit/net, or as specified in description (plus VAT). You will of course receive an invoice with VAT indicated. ABOUT US The company DLK in Nordhorn deals in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machines for trade, industry and crafts. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The building blocks of success at DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Technical data on the EPS (Polystyrene) press: Manufacturer FZ-Recycling GmbH & Co. KG, Germany Type FZR 320 Year of construction 12/2022 Drive power shredder 4 kW Drive power of compactor screw 7.5 kW Gjdpfx Abeu Thkasdebg Drive power hydraulic unit for the holding clamp in the press channel 1.1 kW Total connected load 12.6 kW Current consumption 32 A Compaction ratio of the compacted blocks to the original product approx. 50:1 (depending on material) Block weight after compaction approx. 300kg/m³ (depending on material) Block dimensions 320 x 320 mm, variable length Throughput approx. 100 kg/hour, depending on material Achievable density approx. 250 - 300 kg/m³ The pressed blocks are stacked approx. 1400 mm high on pallets and stretch-wrapped. Machine dimensions approx. 4,600 x 1,400 x 1,980 mm (l x w x h) Transport weight press 1,325 kg Condition of the baler: The press was only used sporadically, is in very good condition and available at short notice. Due to the low weight of the machine and the forklift shoes in the transport frame, the press is mobile and can be used directly on the construction site where the material is produced. The electrical connection is made via a CEE 32 A plug. Scope of delivery for the baler: 1 piece EPS press, ready for connection and use Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Stations/Equipment: Unwinder Rewinder Extraction system incl. shredder (4x Lundberg Type WT200-200U - year 2018) Inert enclosure Busbar laminating unit Cutting units Laminating units / adhesive application units Heated rollers Master computer Control cabinets Drive motors Gsdpfx Ajxzufhjbdjbg Gantry crane Corona treatment

Condition: new, TECHNICAL DATA: - Base area: 15,000 x 24,000 mm [other variants available] - Grid: 5,000 x 6,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm chipboard, raw/white, P6 grade - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new The platforms can be extended modularly as per the specified grid. Other sizes and heights available upon request. Our team is happy to advise you! Delivery scope: Gjdpjxpil Eofx Abdsbg - Columns - Primary and secondary beams - Bracing crosses - Floor covering - Fastening materials PRICES: Variant I: Base area: 30 m² | Dimensions: 5,000 x 6,000 mm | €3,400.00 net, plus shipping and VAT Variant II: Base area: 60 m² | Dimensions: 5,000 x 12,000 mm | €6,008.00 net, plus shipping and VAT Variant III: Base area: 60 m² | Dimensions: 10,000 x 6,000 mm | €6,043.20 net, plus shipping and VAT Variant IV: Base area: 90 m² | Dimensions: 5,000 x 18,000 mm | €8,512.54 net, plus shipping and VAT Variant V: Base area: 120 m² | Dimensions: 5,000 x 24,000 mm | €11,154.85 net, plus shipping and VAT Variant VI: Base area: 180 m² | Dimensions: 10,000 x 18,000 mm | €15,343.02 net, plus shipping and VAT Variant VII: Base area: 240 m² | Dimensions: 10,000 x 24,000 mm | €20,081.60 net, plus shipping and VAT Additional variants available. Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Collision protection YOUR CONTACTS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & MANUFACTURING This platform system is an example from our standard range. Of course, we plan and manufacture your storage platform exactly according to your operational requirements – tailored to area, load capacity, installation height, and intended usage. Our design department will prepare a custom, non-binding quote based on your specifications. Whether you are planning a new installation, an extension, or a modernization of existing equipment, we support you with professional expertise and practical solutions. TRANSPORT & ASSEMBLY We would be pleased to assist you with the transport and installation of the equipment. This item is available for collection. Delivery or shipping is possible at an additional cost. Additional costs depend on the destination and shipment scope and can be provided individually upon request. PAYMENT TERMS Payment terms are agreed upon at the time of order. Prices are per unit/net price unless otherwise specified (plus VAT). You will of course receive an invoice with listed VAT. ABOUT US DLK Nordhorn trades in new and used products for warehouse logistics, conveyor technology, warehouse platforms, textile storage, and machinery for commerce, industry, and the trades. We continuously offer attractive used equipment from various manufacturers/brands at favorable conditions. Please feel free to get in touch with any questions. ✅ Four wins – The success building blocks from DLK – Storage technology | Levelmaker® | Logistics | Solutions

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Gjdpfx Abou Tha Isdobg Year of construction 2011 (38.761 h), 2007 (52.386 h), 2007 (52.998 h) und 2007 (55.325 h) stand operating hours counter November 2021 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The four PZA cardboard shredders were in use in a Dutch logistics centre until 15 December 2021 to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 4 pieces Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredders were an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machines are in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2012, operating hours: 12,078 h, functionality: fully functional, pressing force: 88 t, filling opening width: 1,100 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 30,000 kg, oil tank capacity: 2,000 l, power: 98 kW (133.24 HP), volume flow: 643 m³/h, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2012 Total operating hours: 12,078 hours, as of September 2025 Pump operating hours 6,616 hours (effective pump running time) Gsdpfx Aexcngnjbdobg Number of bales pressed: 65,792 bales, as of September 2025 Main press force 880 kN Specific pressing force 120 N/cm² Pressing force cutting edges free rammer 120 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW frequency-controlled Connected load 98 kW Total current consumption 192 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 18,000 x 4,300 x 3.270 mm (l x w x h) Press dimensions with conveyor system 18,000 x 22,000 x 5,765 mm (l x w x h) Transport weight baler approx 30 t (Main press approx. 20 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2012 Drive power 7.5 kW Belt speed 0.05 – 0.4 m/second Length of feeding conveyor 6,000 mm Height of side wall from feeding conveyor 400 mm Length of incline conveyor 9,000 mm Height of side wall from incline conveyor 800 mm Length of gooseneck 1,500 mm Incline 30° Nominal width 1,800 mm Useful width 1,700 mm Belt quality EP-500/4 Steel cleats on the rubber belt 50 x 50 mm Hollow pin chain, pitch 125 mm, rollers 36 mm Height of drive axle above ground 4,284 mm Overall height of conveyor belt 5,765 mm Transport dimensions of feeding conveyor approx. 7,000 x 2,200 x 1,250 mm (l x w x h) Transport dimensions of the incline conveyor 13,000 x 2,500 x 2,900 mm (l x w x h) Pit dimensions for the conveyor belt 14,765 x 3,260 x 1,250 (l x w x h) Scope of delivery: The conveyor belt, baling press with bale chute, and wire drawing stations are available for sale, but without the wire. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.