Used Alexis Pressure Gauge for sale (16,275)

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaning unit, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift tines, suitable for installation in service vehicles. PTC Salmon, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/150 | 60 l/min at 150 bar | Engine: Kohler 19 kW Salmon 45/200 | 45 l/min at 200 bar | Engine: Kohler 19 kW Salmon 35/250 | 35 l/min at 250 bar | Engine: Kohler 19 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Kohler 19 kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 760x1,250x1,200 mm Dimensions with 400l water tank LxWxH: approx. 1,220x1,250x1,200 mm Dimensions with 800l water tank LxWxH: approx. 1,670x1,250x1,200 mm Empty weight without water tank: approx. 370 kg Empty weight with 400l water tank: approx. 400 kg Empty weight with 800l water tank: approx. 430 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW - Flow rate: 30 - 60 l/min - Operating pressure: 150 - 300 bar ENGINE: - Manufacturer: Kohler - Model: KDW 1003 - Fuel: Diesel - Max. power: 26 hp (19 kW) CONTROL PANEL: - Start button - Operating hour counter - Electronic fuel gauge - LED indicators for oil temperature, low oil pressure, clogged air filter, tachometer, generator and spark plugs - Emergency stop button ELECTRICAL CONTROL: - Wind/unwind hydraulic hose reel; - Bypass on/off; - Speed control +/-; - Emergency stop button; - Switch to wireless remote control; INSTALLED ALARM: - Low water protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: Electric hose reel - Material: Stainless steel - Capacity: max. 80 m ½“ and 80 m 3/8" high-pressure hose - Hose: 80 m ½“ high-pressure hose (included) - Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: manual hose reel - Material: Stainless steel Ndsdpfx Aasiky H Sozsb - Capacity: max. 35 m ¾“ low-pressure hose - Hose: 35 m ¾“ low-pressure hose (included) WATER FILTER: - With washable cartridge and drain valve. - Filtration rate: 50 Mesh INCLUDED IN DELIVERY: - Multifunctional wireless remote control IMET; - Engine on/off; - Bypass on/off; - Speed control +/-; - Wind/unwind hydraulic hose reel; - Emergency stop button; - Battery charger for wireless remote control; - 400 or 800 l water tank (with steel frame) made of polyethylene; OPTIONAL ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½“ high-pressure hose; - 50, 60 or 80 m 3/8“ high-pressure hose with G3/4“ connection; ACCESSORIES ON REQUEST: - STORZ kit for connection to the water hydrant; - UNI 45 kit; - Version with 2 HD reels; - Mobile hot water generator 10 kW – 12 VDC; - High-pressure spray gun kit, swivel joint and quick coupling; - High-pressure lance kit with flat spray nozzle 15° / rotating nozzle; - Lance kit for high flow; - Rotating nozzle kit; - Double nozzle kit; - Water sandblasting lance kit; - Detergent dispenser kit; - Stair cleaning unit; - Surface cleaner; - Sludge suction device (Venturi); - Pipe cleaning nozzles; Further accessories on request.

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: BH6723-BH1001, tank capacity: 1,000 l, Equipment: documentation/manual, BRINOX 1,000 L Pre-Fill Tank – 1.4435 – Double Jacket – PED Cat. IV Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMMBI-1000 Tag No.: BH6723-BH1001 Serial No.: 1003454 Year of Manufacture: 2020 CE Marking: CE 0036 Condition: As new / unused TECHNICAL DATA Product type: Pre-fill / process vessel Nominal volume: 1,000 L Total volume: 1,400 L Net weight: approx. 610–762 kg Product contact material: 1.4435 (AISI 316L) Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Permissible temperature TS: -10 / +150 °C Fluid group: 1 Design according to AD 2000 Pressure vessel in accordance with PED 2014/68/EU Category IV Module G – Individual inspection Notified body: TÜV SÜD Identification number: 0036 TÜV CERTIFICATION EU Declaration of Conformity (Module G) Certificate no.: Z-EU-SI-LJU-20-05-2702107-19125214 Inspection report no.: P-EU-SI-LJU-20-05-2702107-19125214 Final inspection in accordance with PED Annex I No. 3.2 carried out Pressure test in accordance with Annex I No. 3.2.2 carried out Acceptance without deviations Permissible load cycle count: 10,000 cycles (1.3 bar) Acceptance date: 20.05.2020 FAT – Factory Acceptance Test Complete works FAT carried out: • Pressure test • Visual inspection of weld seams • NDT testing (RT/PT) • Dimensional inspection • Surface roughness measurement (≤ 0.8 µm) • Calibration test Nsdpfx Aasykqmzjzsdb • Documentation review FAT fully documented. DESIGN • Cylindrical, horizontal pressure vessel • Double jacket for heating/cooling • Internally electropolished • Pharmaceutical-grade weld finish • Manhole DN 500 • CIP connection • Safety valve • Pressure gauge • Multiple process and measuring nozzles • For pressurised and vacuum operation CONDITION • Never used in production • Factory tested • TÜV Module G certified • As-new industrial condition • No signs of use • Immediately available DOCUMENTATION Complete structured documentation available, including: • EU Declaration of Conformity • TÜV certificate with inspection report • TÜV design assessment • FAT protocols • Material certificates EN 10204 3.1 • WPS/WPQR and welders’ lists • NDT reports • Surface roughness protocols • Internal pressure test • Measurement reports • Calibration certificates • Parts list and drawings • Operating and maintenance manuals Digital documentation folder available. • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP installations • Biotechnology High-quality BRINOX pharmaceutical specification with PED Cat. IV Module G individual inspection by TÜV SÜD (CE 0036) and complete FAT documentation. Not a standard tank – tested project quality. Immediately available.

Condition: excellent (used), Huber Unichiller 060Tw water-cooled recirculating chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 060Tw Equipment type: Water-cooled recirculating chiller Temperature range: -20 to +40 °C Cooling capacity: up to 6 kW Offered is a used Huber Unichiller 060Tw with a water-cooled refrigeration unit and Pilot ONE touchscreen control. The unit is designed for the precise cooling and temperature control of external closed circuits and is suitable for applications such as process cooling, machine cooling, laboratory applications, chemical processes, and technical and industrial systems. Technical data: Temperature range: -20 to +40 °C Temperature stability at -10 °C: 0.5 K Internal temperature sensor: Pt100 Connection for external sensor: Pt100 Safety class: I / NFL Protection class: IP20 Cooling capacity at +15 °C: 6.0 kW Cooling capacity at 0 °C: 5.0 kW Cooling capacity at -10 °C: 3.1 kW Cooling capacity at -20 °C: 1.7 kW Power connection: 460 V / 3 phases / 60 Hz Max. current draw according to nameplate: 6.7 A Refrigerant: R507 Refrigerant charge: 1.2 kg Max. pressure: 25 bar CFC- and HCFC-free Circulating pump: C3 Max. flow rate: 122 l/min Max. delivery pressure: 5.6 bar Pump connection: G1 1/4 male Cooling water connection: G1/2 male Min. cooling water differential pressure: 1 bar Max. cooling water pressure: 6 bar Ndjdpfx Aajzui Uqezjb Cooling water consumption: approx. 70 to 330 l/h, depending on the inlet temperature Min. fill volume: 5.9 l Expansion volume: 7.5 l Permissible ambient temperature: +5 to +40 °C Control: Huber Pilot ONE controller 5.7" color touchscreen Graphical temperature display Program and ramp functions Digital level indicator Multilingual user interface Ethernet USB Host / Device RS232 / Serial Pt100 connection for external temperature sensor Dimensions: Dimensions: approx. 600 × 600 × 1450 mm (W × D × H) Net weight: approx. 213 kg Equipment: Water-cooled refrigeration unit C3 circulating pump Pilot ONE touchscreen controller Stainless steel housing Stainless steel circulating pump Atmospherically open expansion tank Copper-brazed evaporator Digital level gauge Main switch Ethernet, USB, and RS232 interfaces Pt100 connection Cooling water and process connections Castors Connection hoses as shown in the pictures Shipping data: Dimensions: approx. 600 × 600 × 1450 mm Weight: approx. 213 kg net Shipping by freight forwarder possible. Scope of delivery: 1 × Huber Unichiller 060Tw recirculating chiller Connection hoses and accessories as shown in the pictures. Condition: Used. Optical condition as shown in the pictures. The unit is available upon agreement. Scope of delivery as pictured. Subject to changes, errors and prior sale.

Condition: good (used), KÖHLER Corrosion Test System HK-400 Manufacturer: KÖHLER Type: presumed HK-400 Control System: ADWEST KÖHLER PC102 Marking: SSK_Köhler_0400-01 PN: 1356 For sale is a KÖHLER corrosion test system suitable for salt spray, condensation, and corrosion tests in industry, research, development, and quality assurance. The unit is designed for testing components, coatings, metal parts, and technical assemblies under corrosive environmental conditions. Visually, the system corresponds to a KÖHLER HK-400 model for salt spray and condensation testing. Technical specifications: Test chamber volume: approx. 400 liters Internal dimensions: approx. 1020 × 750 × 500 mm Ndodpjy N R Tajfx Aazsb External dimensions: approx. 1970 × 1050 × 600 mm Temperature range: ambient +10 °C to approx. +55 °C Voltage: 220 V / 50 Hz Equipment/features: ADWEST KÖHLER PC102 control system Digital display unit Stainless steel test chamber Viewing window in the door Multiple test grids / shelves Integrated pressure gauges Connections for test media supply Industrial-grade construction Possible test procedures: Salt spray testing Condensation water testing Kesternich corrosion testing Corrosion testing on coatings and metal parts Automotive and industrial test applications Condition: Used equipment with signs of age and use. Visual condition as shown in the pictures. Important note: The original manufacturer's nameplate was not present on the unit. The technical data was compiled based on existing markings, pictures, and comparable KÖHLER HK-400 manufacturer information. Scope of delivery: System as shown All included items according to the pictures. Other notes: Inspection by appointment is possible. Loading can be arranged. Commercial sale – Sale without warranty. (Specifications subject to change and errors excepted.)

Condition: ready for operation (used), Year of construction: 2009, pressure 170 t chamfer lenght 3170 mm distance between columns 2700 mm column arm 420 mm dayligth 620 mm stroke 350 mm ajustment speed 160 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec oil volume 280 L 0 300 bar controlled axis 7 Anzahl Number of working hours ca. 51.500 h total power requirement 16.5 KW weight of the machine ca. 12700 kg range L-W-H 4550 x 2650 x 3150 mm "LONG STROKE" special version Excellent condition (!!) Original price approx. 200.000 Euro Special price on request ----- "LONG STROKE" electro-hydraulic press brake featuring: * Increased daylight opening (installation height) = 620 mm * Increased cylinder stroke = 350 mm ----- Equipment: - Electro-hydraulic CNC press brake - AMADA CNC control "AMNC" - 7 axes (X1+X2, Y1+Y2, R, Z1+Z2) * Swiveling control unit - front left * Touchscreen control panel Nedpfx Aszz S D Ioazedb * Tool & program library * Incl. handheld control unit for manual axis movement - CNC-controlled backgauge adjustment (X1+X2) * Adjustment range .. 700 mm * Adjustment speed .. 500 mm/sec. - CNC-controlled vertical adjustment of gauge fingers (R-axis) * Adjustment range .. 250 mm * Adjustment speed .. 160 mm/sec. - CNC-controlled left-right adjustment of gauge fingers (Z1+Z2) * Adjustment speed .. 1000 mm/sec. - AMADA manual upper tool clamping system * Type: WILSON TOOLS Express * Vertical tool loading/unloading possible * Incl. 1x set of sectional ROLLERI upper tools * "TOP 175.60.R2" ... H 143.8 + 30 mm / 60 degrees - AMADA lower tool holder * Incl. sectional / reversible 4V die * V-openings: 16/32/35/50 mm - FIESSLER laser safety system (front of machine) * Motorized adjustment * Model series: "AKAS III 150" - Side safety guards (swinging doors) - Rear safety guard (swinging door) - 1x movable dual foot pedal - Front emergency stop button - Original operating manual

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Machine Description BRINOX LEP 12 – CIP System Precipitation PRE LEP 12 CS6725 Package 5 Manufacturer BRINOX Prozess- und Edelstahltechnik GmbH, Offenburg Year of Manufacture 2020 Serial Number 1003614 Technical Data Compact CIP skid system in stainless steel frame design. Product designation: LEP 12 – CIP System Precipitation PRE. Dimensions approx. 1520 x 970 x 1994 mm. Product-contact parts: Stainless steel 1.4435. Frame and structural components: Stainless steel 1.4301. Integrated shell-and-tube heat exchanger by NEUMO. Centrifugal pump in hygienic design. Piping fully welded in pharmaceutical grade. Insulated media lines. Fittings incl. GEMÜ ball valves. Various integrated pressure gauges and measuring instruments. Calibrated pressure measurement system (Fluke pressure transducer, measuring range −1 to 20 bar, resolution 0.001 bar, accuracy 0.06 % FS). Media Connections: NaOH Acetic acid CIP supply CIP return Black steam Black steam condensate Neutralized wastewater Pressure tightness test performed with compressed air. Test pressure range approx. 3.19–3.24 bar. Maximum measured pressure drop < 0.015 bar during the test period. Result: passed. Application CIP cleaning system for pharmaceutical process plants, especially for precipitation vessels. Suitable for caustic and acid cleaning as well as steam integration. Designed for hygienic applications in pharmaceutical production. Construction Welded, compact skid design with robust stainless-steel frame construction. Hygienic piping layout with defined media paths. Integrated shell-and-tube heat exchanger for CIP media temperature control. Integrated process pump, valve technology, and instrumentation on a compact frame. General tolerances according to EN ISO 13920. Industrial design with crane lugs for transport. Condition New, unused, and in original packaging. The system was only inspected as part of the FAT process and has never been in production use. FAT / Documentation Status Complete Factory Acceptance Tests carried out. Pressure tightness tests successfully passed. Calibration certificates available. All test protocols fully documented. Complete Documentation List Ndodpeyl H Tasfx Aazsb FAT documentation Pressure test protocols Calibration certificates P&ID 3D drawings Material and welding documentation Nameplate and manufacturer documentation Special Features Pharma-grade material selection. Compact, immediately ready-to-use skid unit. High-quality components from renowned manufacturers. Complete technical documentation available. Immediately available.

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Product: LEP13.1 – AS-Batch Temperature Control Unit System type: Temperature control unit for ammonium sulfate batch system Year of manufacture: 2020 Serial number: 1003620 Njdpfx Aoyl Izxjazodb Tag number: MR-ASF-ASF61-KK6770 Equipment number: 20022748 Media Connections / Process Data WCOV – Chilled water supply: 6 °C WCOR – Chilled water return: 12 °C WSV – Process/municipal water AIP10 – Control compressed air 6 bar Design as a closed temperature control module with integrated pump and heat exchanger technology. Dimensions Overall dimensions as per layout: approx. 1920 x 1435 x 1573 mm (L x W x H) Compact, skid-mounted unit with welded stainless steel frame. Construction Frame construction in stainless steel Fully insulated piping (industrial insulation) Stainless steel shell-and-tube heat exchanger Electrical inline water heater WT1011 Pump PU1021 Pump PU9203 Heat exchanger WT1001 Expansion vessel BH9701 Fittings: GEMÜ shut-off valves Pneumatically actuated valves Manual ball valves Pressure gauges Sensors and instrumentation as per P&ID Complete piping and component labeling provided. Condition New and in original packaging. Not yet put into operation in production. Factory new condition. Supplied directly by the manufacturer Brinox. FAT / Test Status FAT carried out. Leak test: Test medium: Compressed air Test pressure: approx. 3 bar Holding time: 1 hour Result: Passed Calibration: Pressure gauge calibrated Measuring range: 0–10 bar Calibration certificate available Traceable to national standards Documentation Turn-Over-Package complete Included documents: FAT plan FAT report Non-conformance form Layout drawing check Maintenance and calibration accessibility check P&ID review Leak test report Calibration certificates Documentation check Factory certificate 2.1 according to EN 10204 LBM material list incl. EU declarations List of installed components – equipment List of installed components – instrumentation points (PLT) Material parts list for as-built isometry Key Features GMP-compliant construction Pharma/biotech project quality Full traceability Compact plug-and-play skid design Completely piped, insulated, and ready to connect Immediately available

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, BRINOX LEP13.2 – AS Storage Tempering Unit – GMP – Year of Manufacture 2020 – Like New Manufacturer: BRINOX Process Systems LEP13.2 KK6772 Package 12 System type: LEP13.2 – AS Storage Tempering Unit Project: Ammonium sulphate system Year of manufacture: 2020 Serial number: 1003624 Tag number: MR-ASF-ASF61-KK6772 Location: Germany DESCRIPTION For sale is a nearly new LEP13.2 tempering unit in pharmaceutical GMP-compliant design, manufactured by BRINOX Process Systems. The unit is constructed as a compact, pre-assembled skid unit and was designed for use in an ammonium sulphate storage system. Complete project and FAT documentation is available. TECHNICAL DATA Type: LEP13.2 – AS Storage Tempering Unit Medium: Ammonium sulphate Design: Pharma / GMP Materials: Stainless steel 1.4435 / 1.4301 Control air pressure: 6 bar Pressure and leak testing performed FAT successfully completed MAIN COMPONENTS 2x KSB Movitec centrifugal pumps Alfa Laval plate heat exchanger Electric instantaneous water heater Reflex expansion vessel Samson control valve GEMÜ ball valves (manual & pneumatic) Labom pressure gauges Comprehensive sensors & measuring instruments Insulated pipework Stainless steel skid frame construction APPLICATIONS Temperature control of process media Use in GMP-regulated production areas Pharmaceutical and biotechnology plants Media circuits with temperature control CONSTRUCTION Compact, closed skid unit Fully piped Professionally insulated piping High-quality industrial components Service-friendly layout Completely dismountable and transportable CONDITION Condition: New, original packaging Year of manufacture: 2020 Project-specific unit Hardly any operating hours Visually and technically in excellent condition DOCUMENTATION FAT documentation Pressure test certificates P&ID diagrams Layout drawings Factory certificates according to EN10204 Materials lists EU declarations of conformity FEATURES Complete GMP documentation High-quality brand components Ndjdoyl Na Nopfx Aazsb Ideal for pharmaceutical and biotech applications Immediately available Significantly below new price

Condition: ready for operation (used), Year of construction: 2013, This 5-axis SCM Stefani MD HP edgebander was manufactured in 2013. It features a robust steel construction, high-frequency motors, and a "Startouch" control system with a 12" touchscreen. Capable of handling solid wood edges up to 15 mm and rolls up to 3 mm, it includes a pre-milling unit, interchangeable glue pot, and a feed speed of 25 m/min. Consider the opportunity to buy this SCM Stefani MD HP edgebander. Contact us for more information. • Machine maintained and serviced • Edge banding machine for single-sided edge application • Heavy-gauge steel construction • High-frequency motors Ndjdpezug Sgefx Aazob • Protective hood over all units after the gluing station • Spacer on the rotary control panel • Panel feeding via chain feed • “Startouch” control system with 12" color touchscreen • Solution MD-HP "T-ER4S" version • Capabilities: solid wood edges up to 15 mm; edge rolls up to 3 mm • Feed speed: 25 m/min • Pre-milling unit RT-E (entry spindle with diamond cutters) • Gluing unit VC-S4 / QMS with interchangeable Teflon-coated glue pot • iGlue device • EVA pre-fusion • Motor-driven feed rollers, interchangeable (needle roller for solid wood, plastic rollers) • 3 pressure rollers, one motor-driven • Two-motor pressure units: straight and inclined • Anti-adhesive agent spray unit AAR for edge finishing • Scraper and edge scraper unit • Cloth polishing unit Additional equipment • Anti-adhesive and polishing liquids

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer BRINOX d.o.o. Project Number B-0001113-LEP2.3 LEP 2.3 KK6762 Package 9 Module M024 Product Description LEP2.3 – Wash Solution Temperature Control Unit Serial Number 1003572 Equipment Number 20022782 Tag Number MR-INH-VPR61-KK6762 Ndodpfxeyl Iwto Aazob Year of Manufacture 2020 Technical Data System Type Pharma temperature control skid for precise temperature regulation of wash and elution solutions. Constructed as a compact, multi-level stainless steel frame design with fully integrated pump, heat exchanger, and valve technology. Dimensions Length 1920 mm Width 1365 mm Height 1840 mm Design Fully pre-assembled, insulated temperature control skid Pharmaceutical design according to GMP requirements Industrial stainless steel frame construction Materials Product-contact parts: Stainless steel 1.4435 / 1.4571 Frame construction: Stainless steel 1.4301 Welds as per EN ISO 13920 D Insulation Completely insulated piping and equipment Closed-cell high-performance insulation with black protective sheathing Main Components PU1021 Process Pump PU9203 Chilled Medium Pump WT1001 Plate Heat Exchanger WT1011 Finned Tube Heat Exchanger BH9701 Expansion Tank Pneumatic Control Valves GEMÜ Stainless Steel Ball Valves Pressure Transmitters Temperature Measurement Points Pressure Gauges Electrical Junction Box with Warning Labels Stainless Steel Cable Trays Media Chilled Brine Supply / Return Wash Solution Process Medium Control Air 6 bar All media connections sealed at factory and packaged securely for transport. Leak Testing Performed as pressure test with compressed air. DP-01 Medium: Compressed Air Test Pressure: 3.15 bar Pressure Drop: 0.13 bar Date: 27.07.2020 Result: Passed DP-02 Medium: Compressed Air Test Pressure: 3.28 bar Pressure Drop: 0.07 bar Date: 26.07.2020 Result: Passed Pressure holding time: 1 hour each No leaks detected Calibration Certificates Calibration Laboratory: LOTRIČ Metrology Certificates according to EN ISO/IEC 17025 Measurement Ranges: –1 to 20 bar and 0 to 10 bar Calibration performed Documentation Scope FAT Plan and Report Deviation Report Layout Drawing Check Maintenance Inspection P&ID Leak Test Report Calibration Certificates Works Certificate 2.1 EN10204 Material List As-Built Isometrics Complete Turn-Over Package Inspection Status FAT performed Pressure test passed Calibrations available PED-compliant design Pharma documentation complete Application Temperature control of wash and elution solutions in biopharmaceutical production facilities Suitable for GMP environments Condition New system Original packaging Unused Year of manufacture: 2020 Factory condition Fully documented Immediately available

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 1,000 l, Equipment: documentation/manual, BRINOX 1,000 L Pre-Fill Vessel – 1.4435 – Double Jacket – PED Cat. IV Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMMBI-1000 Tag No.: BH6725-BH1001 Serial No.: 1003455 Year of manufacture: 2020 CE Marking: CE 0036 Condition: As new / unused TECHNICAL SPECIFICATIONS Product type: Pre-fill / process vessel Nominal volume: 1,000 L Total volume: 1,400 L Empty weight: 762 kg Product contact material: 1.4435 Permissible pressure (PS): -1 / +3 bar Test pressure (PT): 5.4 bar Permissible temperature (TS): -10 / +150 °C Fluid group: 1 Design according to AD 2000 Pressure vessel compliant with PED 2014/68/EU Category IV Module G – Single Unit Inspection Notified body: TÜV SÜD Notification number: 0036 FAT – Factory Acceptance Test Full factory FAT conducted and documented. Testing includes pressure test, NDT (non-destructive testing), dimensional inspection, surface roughness inspection, and documentation release. FEATURES • Cylindrical horizontal pressure vessel • Double jacket for heating/cooling • Interior electropolished • Pharmaceutical-grade welding • Manway DN500 • Multiple process and instrument connections • Safety valve • CIP connections • Suitable for pressure and vacuum operation CONDITION • Never used in production • TÜV Module G certified • As-new industrial condition • Immediately available DOCUMENTATION – complete and available Comprehensive structured documentation including: • EU Declaration of Conformity • TÜV certificate with inspection report • TÜV design assessment • FAT documentation • Material certificates • Welding lists and WPS/WPQR • NDT reports • Surface roughness protocol • Surface treatment report Ndedeykt T Repfx Aazjb • Internal pressure test • Dimensional protocol • Calibration certificate (pressure gauge) • Component drawings • Assembly parts list • Operation and maintenance manuals (equipment & components) • Qualification certificates • Analysis certificates for welding consumables and shielding gases Complete digital documentation file available. APPLICATIONS • Pharmaceutical industry • WFI / PW • GMP-compliant plants • Sterile liquid processes • Biotechnology High-quality BRINOX pharmaceutical version with PED Cat. IV Module G single unit inspection by TÜV SÜD, complete FAT, and full technical documentation. Immediately available.

Year of construction: 2004, condition: excellent (used), High quality fully serviced Bystronic 200ton x 4metre cnc pressbrake for sale • Pr6 200 x 4100 • Make: Bystronic Edwards Pearson • Model: PR 6 Pressure Reference • Year / new: 2004 • Total axis:6 – 4axis back gauge X R Z1 Z2 • Hydraulic crowning • Free standing no pit required • Capacity / bed size / tonnage: 4metre x 4100mm x 200ton Nodpsn Smafofx Aazedb • Cnc control: Cybelec Modeva 10S control

Condition: new, Year of construction: 2025, pressing force: 100 t, stroke length: 300 mm, – Capacity 100 tons – Cylinder stroke 300 mm – Working width 1070 mm – 2 speeds – With V-blocks/pressure plates – Pressure gauge – Emergency stop – Documentation – 400 V Nodpfxswg Smio Aazsdb

Condition: used, Perkin Elmer Instruments Differential Scanning Calorimeter with Cooling, DSC 8000, N5340524 Model: DSC8000 Type: N5340524 Condition: Used General: Dual-furnace differential scanning calorimeter with power compensation, Perkin Elmer DSC 8000, equipped with Intracooler 2. Enables precise heat flow measurements from approx. –70 °C to 750 °C with high sensitivity and rapid thermal response. General Instrument Specifications DSC Type: Dual furnace design (independent sample and reference furnaces) Measurement Principle: Power compensation Furnace Material: 90% platinum alloy Temperature Sensors: Distributed platinum resistance thermometers Temperature Performance Standard temperature range: approx. –180 °C to 750 °C (with suitable cooling accessories) With Intracooler 2: approx. –70 °C to 750 °C Minimum Temperature (Intracooler 2): approx. –80 °C Heating Rate: 0.01 to 300 °C/min Cooling Rate: 0.01 to 150 °C/min Measurement Performance Dynamic Range: ±800 mW (typical) High sensitivity and fast response due to low-mass furnace design Excellent baseline stability and temperature accuracy Gas and Atmosphere Control Two regulated gas lines with automatic switching Typical purge gases: nitrogen, helium, argon Supports high gas purity (up to 99.999%) Interfaces and Connections USB Ethernet (LAN) Gas inlet connections Connection for cooling unit Power supply connection Accessory ports (e.g., autosampler, high-pressure cell, UV/photocalorimeter module) Temperature calibration interface Technical Data 3.15 AMP T (5 x 20 mm) 250 V 100–240 VAC 50/60 Hz Maximum power consumption 400 VA Accessories Cooling system: PolyScience Intracooler 2 Norgren gas pressure regulator with gauges for external gas supply Autosampler with 96 positions High-pressure DSC cells, UV/photocalorimeter accessories IEC power connection Documentation PolyScience Intracooler 2 Model: N5341746 P10N9E402E Voltage: 240 IP-100 Ndedpfx Aoyluicsazob Hz/A/Ph: 50/7.5/1 Refrigerant: 350 g R-404A Note on Item Condition: Without software/PC

Condition: excellent (used), Year of construction: 2008, pressing force: 200 t, stroke length: 415 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, table length: 4,100 mm, overall weight: 17,400 kg, Equipment: CE marking, safety light barrier, High quality, fully serviced, very clean Bystronic 4metre x 200ton cnc pressbrake for sale Complete with extended daylight and stroke Pr200 200 x 4100 Make: Bystronic Model: PR 200 Pressure Reference Year / new: 2008 Total axis:6 – 4axis back gauge X R Z1 Z2 Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 200ton Cnc control: Cybelec Max stroke 415mm Rapid approach 190mm/s Bending cycle 10mm/s Ndodpfszcw Uvjx Aazsb Rapid return 150mm/s

Year of construction: 2024, condition: ready for operation (used), Glazing bead saw manufactured in 2024. This ROTOX GLA 401 features simultaneous cutting of 4 glazing beads at 45° and milling of fixing holes. It includes pneumatic material clamping and an electric locking machine cover for enhanced safety. The machine accommodates PVC profiles with a maximum section of 375 × 45 mm and offers a cutting length of up to 260 mm with a length stop. If you are looking to get high-quality cutting capabilities, consider the ROTOX GLA 401 machine we have for sale. Contact us for further details. • Function: Simultaneous cutting of 4 glazing beads (45°) and milling of fixing holes • Pneumatic material clamping: Yes • Pneumatic pressure: 2 bar • Pneumatic pressure gauge with filter: Yes Njdpozg Igpefx Aazodb • Electric locking of machine cover: Yes • Clamping plates: Tool-free • PVC profile section capacity: Min 50 × 50 mm; Max 375 × 45 mm • Cutting length: 200 mm (without length stop); 260 mm (with length stop) • Electrical connection: 400 V / 50 Hz • Installed power: 1.1 kW • Profile list: Available • Operating instructions: English • Machine inscription: Italian • Attachment side: Right

Condition: used, This listing is for 1 of 4 Parker SciLog SciPres Pressure Monitor. The unit is in full working condition and is ready for immediate release The Parker SciLog SciPres Pressure Monitor is a pre-calibrated, single-use pressure sensor specifically engineered for biopharmaceutical applications. It seamlessly integrates advanced pressure sensing with disposability, offering a hassle-free setup that enhances operational efficiency in critical environments. Key Features: - Pre-calibrated Sensors: Each sensor comes pre-calibrated for immediate use, simplifying setup and reducing error risks. - Unique ID for Traceability: Each unit is pre-programmed with a unique identification number, enabling thorough traceability and data documentation through the SciLog® SciDoc software. - Integrated Calibration Data: Calibration and identity information are stored on the sensor's chip for easy access and validation. - Simultaneous Inputs: The monitor can display inputs from up to three SciPres pressure sensors at once, providing comprehensive monitoring. - Pressure Calculations: It calculates and displays both trans-membrane pressure (TMP) and differential pressure (dP) for enhanced process visibility. - Stability: Gamma-stable, NaOH stable, and autoclave stable, ensuring compatibility with various sterilization processes and chemical environments. Applications: Nsdexxycyopfx Aazodb - Filtration Processes: Ideal for monitoring pressure changes in filtration systems for efficient operation. - Chromatography: Supports precise pressure control, crucial for effective separation processes. - Reverse Osmosis: Ensures accurate pressure measurements for optimally functioning systems. - Fermentation: Monitors pressure conditions critical for bioprocessing and yield optimization. Additional Specifications: - Digital Display: Easy-to-read digital interface for real-time monitoring of pressure data. - Plug-and-Play Convenience: Designed for out-of-the-box use, allowing quick integration into existing systems without extensive setup.

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck Nedpfx Ajx Suzaoazjdb * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: excellent (used), Year of construction: 1985, Ref:11083 . 1985 COMO 220 MC2 Guillotine. Swedish built heavy-duty guillotine for accurate cutting of paper and heavier substrates. Refurbished 2010 and upgraded to computer programme. Comprising; Right side table to facilitate rear loading of cutting bed Central air table Steel side tables Computer programme cut control, with keypad input of data Twin cut control buttons Variable pressure clamp control Swift knife change system and adjustment Powered variable speed back gauge I.R. light beam guarding to UK HSE spec. 2 x HSS knives Including knife change tools and accessories. Specification: Cut width, Max: 220 cm Ndodpfxjy Awy Hj Aazeb Cut depth, Max: 220 cm Clamp opening :18.5 cm Electrics: 415V, 30A, 50Hz

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed Nsdpfx Asyz Dhzeazsdb 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Condition: new, Year of construction: 2026, functionality: fully functional, controller manufacturer: Cybelec, controller model: CybTouch 15, bending force (max.): 125 t, control type: CNC control, IT2 2026 Design CNC Controller CYBELEC CybTouch 15 Force 125 T Bending lenght 3000 mm Distance between columns 2600 mm Depth throat 320 mm Upper Ram stroke 150 mm Torsion Shaft with double Articulation Mechanical depth adjustment in each hydraulic Cylinder, Setting by brushless Servototor and transmission between left and right side Closing Ram speed 9 mm/s Upgoing Return-speed 40 mm/s Total Power requirement 10 kW Machine weight 6900 kg 3 +1 Axes (Y,X,R + compensation crowning) CNC controller CybTouch 15 with 15" Touchscreen with vivid colors and high contrast 200 Programs, 50 Dies, 24 Sequences per program, 10 Materials Automatic calculation of hydraulic cylinder's stopper position Easy single bends with the EasyBend page Correction menu Many languages available Upper Ram guidance by grey cast iron slydways Hydraulic equipment with counter balance compensation- pressure in lower chamber Centered lower die system 60 mm AMADA-tool Standard and 13 mm WILA Groove Upper Ram featured with 15 tool holders for punches with AMADA Standard dimensions and Fall down security Back gauge with linear guide and Ballscrews Back gauge travel 600 mm (Option 800 mm) 2 back gauge fingers on linear guides Nedpfx Aajxhc Spezodb Automatic height adjustment (R axes) Automatic crowning table Safety Equipment : Foot switch with Emergency Stop Position Closing speed < 10 mm/s Side covers with safety switch Rear-protection with sliding door and safety switch Low control Voltage (24V) Safety control unit cat IV Standard configuration and equipment : Electric control cabinet on right side CNC control interface with Aluminium - arm 1 Line of punches (Upper tools) 85° R1, Height 150 mm 1 Line of 4 sides Dies, widths: 16 mm / 85°, 22 mm / 85°, 35 mm / 85°, 50 mm / 85° CE Certificate Operation manual in English, German or French language Warranty 2 Years EXW Douarnenez/ FRANCE special price 55,120 € + VAT loaded on Truck Delivery and Services need to be quoted seperatly

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction Nsdsxayl Depfx Aazodb - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Condition: used, Year of construction: 2011, operating hours: 8,176 h, functionality: fully functional, machine/vehicle number: WPUD500H0B2000955, operating pressure: 500 bar, total length: 3,650 mm, high-pressure hose length: 50,000 mm, total width: 2,070 mm, pressure: 500 bar, empty load weight: 1,630 kg, input voltage: 12 V, fuel: diesel, overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 34.5 kW (46.91 HP), DGUV certified until: 10/2026, Dynajet 500TH 30 l/min Maximum pressure: 500 bar 8176 operating hours Regularly maintained, recently serviced, not in operation during winter (only April–October) Owned by the same operator since new For cold water only; can be retrofitted for heating water. Njdpfjz Egw Uox Aazedb

Year of construction: 2011, condition: ready for operation (used), The ultrafiltration system is used to purify various liquids. The membrane elements feature a 37/3.8 channel design, a pore size of 0.1 µm, and a length of 1300 mm. Each of the two modules contains 32 ceramic rods, with a total capacity of 2,000 L/h per module. 1 structural frame, 1 feed pump, 1 rod heater, 2 bleed pumps, 1 cleaning tank, 1 membrane valve, 1 compressed air membrane pump, 1 UF ceramic module, 1 temperature monitoring unit, 1 control valve, 4 pressure gauges with display, 1 control unit compliant with VDE 0110/0113 CE, 1 flow meter, 1 pre-assembly of the system at the supplier's factory. Ndsdpfx Asf Dc D Hsazeb

Condition: new, Year of construction: 2026, The CORMAK MCB350HD Metal Band Saw is a professional-grade metal cutting machine designed for precise mitre cutting from -45° to +60°. Equipped with a heavy-duty cast iron saw bow and a gravity-fed hydraulic feed system, it is ideal for both small-batch and high-volume production. Its rigid construction and premium components enable efficient cutting of structural steel, stainless steel, tool steel, solid bars, pipes, and hollow sections. The machine is equipped with a quick-action vise lever, allowing fast and convenient workpiece clamping. Key Features Mitre cutting range from -45° to +60° – ideal for cutting pipes, profiles, and solid materials at various angles. Heavy-duty cast iron saw bow – provides exceptional rigidity, vibration resistance, and cutting accuracy. Precision blade guidance with carbide inserts – ensures accurate blade tracking while extending blade service life. Automatic shut-off after cutting – improves operator safety and reduces unnecessary power consumption. Gravity-fed hydraulic feed system – delivers smooth, continuously adjustable feed pressure throughout the cutting cycle. Construction and Technology The MCB350HD is built around a robust welded steel frame combined with high-quality cast iron components. The 25° inclined saw bow improves cutting efficiency while extending blade life. A durable worm gearbox drive system ensures reliable long-term operation, while the integrated blade tension indicator (dial gauge tension meter) provides precise blade tension adjustment for consistent cutting performance. The machine is also equipped with a blade cleaning brush, a closed-loop coolant system with electric pump, and a material stop with measuring scale, making repetitive cutting to identical lengths quick and accurate. Precision and Performance The CORMAK MCB350HD metal band saw offers two blade speeds of 36 and 72 m/min, allowing the operator to match cutting parameters to different materials. Precision blade guides featuring bearings and carbide inserts ensure straight, accurate cuts while minimizing blade wear. The coolant system delivers emulsion directly to the blade guides, improving cutting conditions, reducing heat generation, and extending tool life. Applications The MCB350HD is designed for manufacturing plants, metal fabrication shops, engineering workshops, and maintenance facilities where reliability, repeatability, and versatility are essential. It is suitable for cutting: Steel pipes Hollow sections Structural profiles Flat bars Solid round and square bars Stainless steel and other ferrous and non-ferrous materials Standard Equipment Blade cleaning brush Coolant system with pump and reservoir Material stop with measuring scale Bi-metal band saw blade Blade and gearbox safety guards Optional Equipment Roller conveyor table for material feeding Additional band saw blades Laser cutting line positioning system Technical Specifications Specification Value Ndodpfx Asi D Di Seazob Blade dimensions 2950 × 27 × 0.9 mm Blade speed 36 / 72 m/min Minimum cutting diameter Ø 5 mm Minimum workpiece length 100 mm Vise base height 940 mm Total installed power 2.2 kW Drive wheel diameter 330 mm Overall dimensions (L × W × H) 2000 × 1330 × 2020 mm Weight 540 kg