Used All Electric Injection Molding Machine for sale (94,788)

Condition: excellent (used), Year of construction: 1999, Arburg 270S-250-60 year 1999 Closing 25 TO Scrow 22 tie bar from stand 27x27 Kdsdpsg D Rknefx Addog Spraying weight approx 27g

Condition: excellent (used), Year of construction: 1995, Angel ES 650/100HL Closing 100 TO Kodpek N Edtsfx Addodg year 1995 Scrow 45 mm EC 88 Plates HxW 740 x520

Condition: good (used), Year of construction: 1989, Angel ES 7000/800 Closing 800 To FY 1989 cc 90 distance between tie bars 100x100 Kdodpfjc Tt Ifex Addog Snow through knife 105 mm Weighted 64 tons / 41 To+ 15 TO ) splash weight ca3760g The machine in good condition

Condition: excellent (used), Year of construction: 1993, Battenfeld Ksdpfx Adjr Nf Rtjdjdg BK-T 2500/1250 Closing 250 TO Year 1993 Scrow 60 mm distance between tie bars 63x56

Condition: excellent (used), Year of construction: 1999, Battenfeld 400-125 CDC Closing 40 tons Year 1995 Scrow 30 mm Kdjdpetputiofx Addjg Injection weighted 77,8 g Spar spacing 27x32

Condition: good (used), Year of construction: 1993, Netstal 1750 /870 HP Closing 175 TO Kdsdpfog U Arxjx Addjg Year 1993

Condition: good (used), Year of construction: 1992, Fanuc Fanuc car sheet AC 100 Closing 100 tons Year 1992 Kdodpeh R Npxefx Addeg

Condition: excellent (used), Year of construction: 2000, angel. ES 500/110 HL-V Closing 110 tons Kedpfeld Ntvjx Addjdg year 2000 Scrow 35

Condition: excellent (used), Year of construction: 1996, Angel ES 500/90HL Closing 90 tons year 1996 Scrow 40mm Kdsdpfx Ajfbg Izjddog PVC Srow

Condition: excellent (used), Year of construction: 1988, Krauss Maffei KM 250-900B Closing 250 TO Year 1987 sprayed : 470 g Kdsdefp U Hvepfx Addsg Tie bars wide 63x56

Condition: excellent (used), Angel Victory 1350H500V/220 Combi Closing 220 tons year 2004 Kjdpfjpa Rhbex Addjdg Clamping plan WxH 960x830 Scrow 55mm+40 mm 618 cm3+251 EC100/A03 Minmal mold height 320mm Maximum 730mm

Condition: excellent (used), Year of construction: 1991, Engel ES 200/50 HL Closing 50 tons Year 1991 Scrow 30 mm EC 88 Kdodpfxold Nt So Addjg

Condition: used, Year of construction: 2001, operating hours: 58,764 h, functionality: fully functional, machine/vehicle number: 502748, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 420 mm, displacement volume: 144 cm³, injection pressure: 1.905 bar, ejector force: 41 N, ejector stroke: 150 mm, opening stroke: 500 mm, plate length: 590 mm, plate width: 590 mm, installation height: 250 mm, total length: 4,550 mm, total width: 1,450 mm, total height: 2,000 mm, overall weight: 4,800 kg, heating capacity: 9 kW (12.24 HP), pump power: 30,000 W, height adjustment type: hydraulic, stroke length: 150 mm, tool height: 250 mm, tool weight: 700,000 g, Equipment: documentation/manual, Demag ERGOtech Injection Moulding Machine ERGOtech 100-420-200 NC4 Year of manufacture: 2001 Asking price: €8,000.00 – WITHOUT Wittmann peripheral equipment The injection moulding machine is in good condition and ready for operation. For sale is the ERGOtech 100-420-200 NC4 injection moulding machine. Optionally, all corresponding Wittmann peripheral devices can be included at an additional charge. We purchased the Demag ERGOtech in 2020 during our company expansion to fulfill a customer order and equipped it with matching Wittmann peripheral devices. The machine has been serviced on-site by a DEMAG service technician and is free from defects. OPTIONAL: We also offer for sale all associated Wittmann peripheral equipment: Peripheral Equipment from WITTMANN BATTENFELD Deutschland GmbH: Wittmann Tempro Plus D160 – Dual-circuit temperature control unit TEMPRO-PLUS-D-Standard-2-160 DEMONSTRATION UNIT – used, no defects Equipped with: 2 pcs. Reinforced pump TemproPlus D160-1.0kW (2.4A) 60l 1 pc. Ultrasonic flow measurement 140-180° 1 pc. Digital interface 20mA 1 pc. Packaging for temperature control unit Original price: €6,980.00 Sale price: €3,490.00 Kjdpfxstltvzo Addsdg Wittmann Compact Chiller Coolmax C30 WITTMANN WATER CHILLER SERIES: COOLMAX C30 DEMONSTRATION UNIT – used, no defects Original price: €4,750.00 Sale price: €2,375.00 WITTMANN BATTENFELD Deutschland GmbH Drying and dosing accessories - 1 pc. DRYMAX-PRIMUS: E30-70-M for drying plastic granules - 2 pcs. FEEDMAX-S:3NET for conveying free-flowing plastic granules, hinged lid with integrated collector motor - 1 pc. HOPPER: MT203 machine hopper 203 for mounting a series 200 separator - 1 pc. DOSIMAX: MC 18 dosing unit for free-flowing granulate Condition – NEW – Unused Original price: €8,467.00 Sale price: €4,233.50 All prices are exclusive of the statutory 19% VAT. PLEASE NOTE: The offer does not include relocation or transportation costs for the machine. These services can be offered and organised separately upon request. For further questions, please feel free to contact me at any time.

Condition: excellent (used), Year of construction: 2008, operating hours: 49,429 h, functionality: fully functional, machine/vehicle number: 208050, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, displacement volume: 137 cm³, injection pressure: 2,000 bar, injection weight: 140 g, mold height (min.): 250 mm, ejector force: 25 N, ejector stroke: 150 mm, number of injections: 1, type of input current: three-phase, We are selling an ARBURG 420 C GOLD EDITION injection molding machine, manufactured in 2008. The machine has newly re-sealed clamping and injection units, operates perfectly and is in regular production use. Clamping force: 100 t Shot weight: 140 g Kdjdpfx Adeya Eguodsg Screw diameter: Ø35 mm The machine is equipped with: -connection for 3 hot runner nozzles -EUROMAP 67 interface -connection for a color dosing unit -connection for air blow / conveyor belt control The machine is sold without a robot. MATEJ LORENCI: +386-31-589-330

Condition: used, Year of construction: 2017, machine/vehicle number: 244489, Machine as new. Very little used, only for sample production. Machine is fully equipped: see dokuments Kdedpfxox H Npus Addeg Machine houers 22039.

Condition: used, Year of construction: 1989, operating hours: 74,900 h, clamping force: 850 kN, screw diameter: 40 mm, overall weight: 3,700 kg, Machine no. 145464 Year of construction 1989 Machine weight 3700 kg (without oil filling) Clamping force 850kN Heating 8,31KW Motor 18,5KW Total power 27,2KW Kdedpfx Adsr Hrqrsdeg Machine cycles 7,112,306 Operating hours 74,900h Interfaces: Master computer, handling, blow-out, selector switch, core pull 1 hydraulic, mold temperature control 3 pcs. The following accessories etc. are included with the machine: Complete 50 injection unit thermoplastic , Selecting diverter , Hydraulic infeed conveyor (height adjustable 3 levels) (integrated in control) , Diskette drive external (Arburg original) , Documentation and work reports from the machine by Arburg Service , Machine setting course CMD documents (folder) , E-plan , Documents also in digital form , Oil filling (must be pumped into a container before transport (pump is available)) , Electronic water battery

Condition: excellent (used), Year of construction: 2006, Krauss Maffei KM 160–750 CX Injection Moulding Machine Year of manufacture: 2006 Kodex Thzpepfx Addjdg Fully hydraulic clamping system. MC5 control system with color monitor, integrated operator panel, and built-in USB ports. Plasticizing Unit 1 complete HPS-UN plasticizing unit for thermoplastics: Screw diameter: 50 mm Check valve, open nozzle Nozzle radius: 10 mm Nozzle opening: 4 mm Technical Data Clamping Unit Clamping force: 1,600 kN Mold opening force: 86.4 kN Movable platen force: - opening: 44.8 kN - closing: 37.8 kN Platen dimensions (H × V): 820 × 845 mm Tie bar spacing (H × V): 520 × 520 mm Mold opening stroke: 650 mm Mold height (min.): 300 mm Platen opening stroke: 950 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 50 mm Injection pressure: 1,892 bar Shot volume: 393 cm³ Shot weight (PS): 357 g Screw speed (standard/option): 390 / 490 rpm Electrical and Hydraulic Equipment Pump motor rated power: 22 kW Installed heater capacity: 10.97 kW Number of barrel heating zones: 5 Dry cycle rate (Euromap): 1,600 1/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.0 t Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Condition: excellent (used), Year of construction: 2005, Arburg 720 S 3200-2100 Injection Moulding Machine Year of manufacture: 2005 The machine is in very good technical condition, fully operational and ready for immediate use in an industrial facility. The clamping force was factory-upgraded by Arburg to 3600 kN; the machine has received factory servicing. Clamping unit Clamping force: 3,600 kN Platen dimensions (H × W): 1,040 × 1,040 mm Tie bar spacing (H × W): 720 × 720 mm Minimum mould height: 300 mm Maximum daylight opening: 1,400 mm Injection unit Screw diameter: 70 mm Shot volume: 1,078 cm³ Shot weight: 984 g Injection pressure: 2,000 bar Electrical–hydraulic equipment Pump motor rated power: 55 kW Heater power: 30.3 kW Dimensions and weight Kjdpfxox Thw Rj Addedg Net weight with control cabinet: 17 t

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100–12000 MX Injection Moulding Machine Year of manufacture: 2008 Robot: Wittmann Fully hydraulic clamping system. Ksdpfxsx Tgbhs Addedg MC5 control system with color monitor, integrated control panel, and built-in 3 USB ports. Plasticizing unit: Complete abrasion-resistant plasticizing unit for thermoplastics, screw diameter 120 mm, with non-return valve and open nozzle. Technical data Clamping unit Clamping force: 11,000 kN Mold opening force: 770 kN Platen dimensions (H × V): 2,210 × 1,910 mm Tie bar spacing (H × V): 1,550 × 1,250 mm Mold opening stroke: 2,000 mm Mold height (min–max): 600 – 1,200 mm Platen stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection unit Screw diameter: 120 mm Injection pressure: 1,758 bar Shot volume: 6,786 cm³ Shot weight (PS): 6,175 g Screw speed (standard / option): 103 / 145 rpm Injection rate (standard): 1,118 cm³/s Injection rate (accumulator): 1,696 cm³/s Electrical and hydraulic equipment Pump motor rated power: 132 kW Installed heater capacity: 82 kW Number of barrel heating zones: 7 Number of dry cycles (Euromap): 802 1/h Oil tank capacity: 2,440 l Dimensions and weight Net weight with control cabinet: 73 t Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m

Condition: excellent (used), Year of construction: 2004, ENGEL DUO 11050/2300 Injection Moulding Machine Year of manufacture: 2004 Operating hours: 70,029 hours Screw: replaced in 2011 (reinforced – for special materials) Clamping unit Clamping force: 2,300 kN Platen dimensions (H × V): 2,900 × 2,500 mm Tie bar spacing (H × V): 2,000 × 1,600 mm Min./max. mould height: 700 – 1,890 mm Maximum opening stroke: 3,800 mm Kdedpfxox Tf Iao Addjg Injection unit Screw diameter: 135 mm Injection volume: 8,870 cm³ Shot weight (PS): 8,071 g Injection pressure: 1,600 bar Additional equipment Double injection capability Mould tilting option Magnetic platens 2 hydraulic cores 36 heating zones for the mould 10 hydraulic cascades (expandable) Interface languages: English, German Dimensions and weight Net weight (with control cabinet): 113 t + 18 t (total weight approx. 131,000 kg)

Condition: excellent (used), Year of construction: 2001, Krauss Maffei KM 800-5000 MC injection moulding machine Year of manufacture: 2001 Equipment: robot Kdjdpfx Adex Tfyisdsg Technical details: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen feed force (opening): 98 kN Moving platen force (closing): 92 kN Platen size (W × H): 1,610 × 1,530 mm Tie-bar spacing (W × H): 1,120 × 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum daylight: 2,000 mm Hydraulic ejector stroke: 250 mm Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g General machine data Dimensions (L × W × H): 10,500 × 2,860 × 2,890 mm Weight: 43,000 kg

Condition: excellent (used), Year of construction: 2001, clamping force: 250 kN, screw diameter: 18 mm, displacement volume: 20 cm³, injection pressure: 2,500 bar, injection weight: 18 g, General information Year of manufacture: 2001 Control system: Selogica Kdjdsx Tfuyepfx Addog Weight: 2,000 kg Dimensions (L × W × H): 2.9 × 0.9 × 1.9 m Clamping unit Clamping force: 25 t Tool clamping system: 250 / … Plate dimensions: 400 × 400 mm Clearance between tie bars: 220 × 220 mm Maximum distance between plates: 425 mm Injection unit Injection unit: … / 60 Screw diameter: 18 mm Screw L/D ratio: 24.5 Specific injection pressure: 2,500 bar Injection volume: 20 ccm Shot weight: 18 g Ejector Ejector force: 18 kN Ejector stroke: 95 mm

Condition: used, Year of construction: 2017, Arburg 470S 1100 290 injection moulding machine, year 2017 2-component machine The machine has been idle for quite some time. It is from 2017 and has only around 21,600 operating hours. The machine has a clamping force of 1100 kN; the lower unit is a 290 with a 35 mm screw, and the upper unit is a 100 with a 30 mm screw. Only ABS and TPE have been processed so far. The machine is equipped with an integrated hot runner system and 3 core pulls, along with additional options. Included is a Kuka handling unit, which is operated via the Selogica control of the machine, as well as the complete safety enclosure. The two material loaders and the large conveyor belt are not included in the sale. Kdedpfx Ajw D R N Roddeg

Condition: ready for operation (used), Year of construction: 2019, operating hours: 19,884 h, General Data Machine weight 27000 kg Measurements height 278 mm Dimensions Machine Length 890 mm Injection Unit Screw diameter 60 mm Ksdpfx Aex H U Ehjddjdg Clamping Unit Clamping force 3500 kN This DEMAG El-Exis SP 350/820-2500 was manufactured in 2019. A robust electrical injection moulding machine, it features a screw diameter of 60 mm, a clamping force of 3500 KN, and a tie bar distance of 820 mm. With dimensions of 8.90 x 2.21 x 2.78 meters and a weight of 27,000 kg, consider the opportunity to buy this DEMAG El-Exis SP 350/820-2500 electrical injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 800 h, functionality: fully functional, clamping force: 1,250 kN, ejector force: 125,000 N, All CNC FANUC Roboshot machines are FULLY ELECTRIC Demo FANUC Roboshot S100iB 2024 The machine was used at trade fairs as a demo unit and is practically new. Kodpjya D I Defx Addsdg Clamping force: 125 tons Screw diameter: according to customer requirements All additional equipment can be configured according to customer needs and can be upgraded for specific application requirements. Additional optional equipment: - FIBER sorting flap (for separation of good and defective parts) - Hot runner controller (integrated and connected to the machine) - V-gate - Additional electrical sockets - Electrical quick coupling for fast mould change - Water piping system - Mouldflo system for digital monitoring of water flow, temperature, and pressure - Machine elevation by 100 mm - Hydraulic power unit for side cores (2CH / 4CH) - Robot (Cartesian or 6-axis FANUC Robot) - ..... This machine is available for Slovenia, Croatia, Bosnia and Herzegovina, and Serbia.