Used Aluminum Welding Wire for sale (14,084)

Condition: new, table diameter 1600 mm table load 8 t swivelling range 0 - 130 Grad turning speeds 0,05- 0,5 U/min table height adjustment von 1210 bis 2238 mm max. torque on the faceplate 1200 Nm Guedpfxjfv Azhs Ad Roi welding current 700 Ampere including remote control and welding current transmission.

Condition: new, volume capacity 2500 m3/h 0 3000 mm total power requirement 1,1 kW weight of the machine ca. 0,08 t Gsdpfofrzt Usx Ad Roui dimensions of the machine ca. 0,58x0,58x0,58 m

Condition: new, table length 1200 mm table width 1200 mm table height 850 mm Vertikal stroke 40 mm weight of the machine ca. 0,261 t dimensions 1,2 x 1,2 x 0,85 m Gjdpfxjftd T Ss Ad Rjui Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport.

Condition: new, number 37 Positionen 28 mm condition neu Guedogazl Rjpfx Ad Rsi weight 29 kg Basic set 1 37 pieces, 28mm system, consisting of: Clamps: 4 x 280604 Bolt: 8 x 280511 Stop: 6 x 280420.N Angle: 2 x 280110.G Threaded bolt 8 x 280543 Stop 8 x 160415 Accessory set. 1 x 163999 Price plus packaging and transport.

Condition: new, table length 1000 mm table width 1000 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,3 t dimensions 1,0 x 1,0 x 0,85 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available. Guodpfsgazl Uox Ad Rei

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 1,1 t dimensions 3,0 x 1,5 x 0,9 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Guedpfogazmkox Ad Roi Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available.

Condition: new, number 57 Positionen 22 mm condition neu weight 66 kg Set 2 57 pieces, 22mm system, consisting of: Clamps: 6 x 220610.1 Clamps 4 x 220630.1 Prism 4 x 220645.1 Bolt: 18 x 220511 Magnetic bolt 4 x 220740 Stop: 6 x 220410.N Stop: 6 x 220420.N Stop: 2 x 220426.N Angle: 4 x 220110.N Angle: 2 x 220152.N Guodpfx Adegazmrj Rsi Accessory set. 1 x 223999 Price plus packaging and transport.

Condition: new, table length 1200 mm table width 800 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,19 t dimensions 1,2 x 0,8 x 0,85 m Siegmund workstation including 2 drawers Premium Light, through hardened tool steel X8.7, plasma nitrided and BAR coated. Drilling Ø 28 mm, drilling surface 100x100 mm grid. Material thickness approx. 15 mm With the new workstation from Siegmund, you can create your ideal workplace in a modular system. The Siegmund Workstation can be individually adapted and Gjdpfega Nh Hox Ad Rsui expanded to meet your needs and wishes. Whether sawing, drilling or welding - the absolute all-rounder in every workshop! Consisting of: 1x 004002 (Siegmund Workstation) 1x 804004.X7 (perforated plate) 1x 284030 (clamp holder) 1x 004020 (shelf) 1x 284035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) Spacer ring 800653.N is required for clamping with bolts 280510/280511.

Condition: new, number 57 Positionen weight 98 kg condition neu 28 mm Set 2: 57 pieces, 28mm system, consisting of: Clamps: 6 x 280610.N Clamps: 4 x 280630.N Prism: 4 x 280648.1.N Bolt: 18 x 160511 Magnetic bolt 4 x 280740 Stop: 6 x 280410.N Stop: 6 x 280420.N Angle: 4 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Accessory set. 1 x 283999 Price plus packaging and transport. Gjdpfxefh Uw Rj Ad Roui

Condition: new, functionality: fully functional, Welding tractor, ABICAR 1200 PRO 42V, new unit from stock, original packaging Mobile unit for welding longitudinal seams with maximum efficiency. Production of continuous butt and fillet welds – by using these welding systems, longitudinal seams can be produced faster and costs for rework can be significantly reduced. In combination with accessories, the following applications are possible: • Welding with oscillation, • Use of welding torch with larger diameter, • Operation of the unit on outer edges, overlap joints, plates, pipes, tanks, etc. Operation: in combination with welding power source iMIG POWER 400 (available in stock) Godpfxo Afd Nbs Ad Rsui * Torch type: MIG/MAG * Torch diameter: 16 – 22 mm * Voltage: 1 … 42 V, 50/60Hz * Power: 25 W * Workpiece thickness min: 5 mm, ground clearance 5 mm * Speed horizontal / vertical: 0 – 120 cm / min, 0 – 110 cm / min * Curvature radius min: 1,500 mm * Dimensions (L x W x H): 401 x 372 x 236 mm * Weight: 14 kg (welding tractor) * Manufacturer: ABICOR BINZEL, Germany * Several units available Delivery/shipping possible against cost coverage. Image of the product is similar.

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 2,760 mm, total width: 2,450 mm, total length: 3,600 mm, overall weight: 3,200 kg, input voltage: 400 V, input current: 40 A, warranty duration: 12 months, Equipment: documentation/manual, This offer features a robotic welding cell, which includes a Panasonic TM-1800 welding robot with a WG4 controller, along with two workstations equipped with single-axis welding positioners. The workstations, measuring 1200x800 mm, are positioned opposite the robot, with the fixtures located 800 mm above the floor. The entire cell is mounted on a common structural base, allowing it to be easily relocated anywhere within the production facility using a forklift. Safety is managed by a system incorporating limit switches installed on a sliding partition and service access doors. If a limit switch is triggered on the side where the robot is currently operating, both the robot and the positioner will come to an immediate stop. Gedpfx Aj Agng Dsd Roui A fume extraction hood with ductwork will be installed above the cell to capture welding fumes generated during the robot's operation. A filtration unit, featuring an automatic filter-cartridge cleaning system, will be positioned next to the cell. The cell is equipped with a Panasonic TAWERS welding system, which integrates a 350A MIG/MAG inverter power source directly with the robot controller. The robot is outfitted with a wire feeder, a welding cable package, a gas-cooled welding torch, and an anti-collision sensor.

Condition: new, table length 1500 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,8 t Gsdpjmhm Auefx Ad Rjui dimensions 1,5 x 1,5 x 0,9 m Welding table "SIGMUND Professional 750 + Plasma-nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport.

Condition: new, table diameter 350 mm table load 100 Kg swivelling range 90 Grad turning speeds 0,2 - 2 stufenlos U/min Gjdpfoupw Nxox Ad Reui table load capacity 50 kg. vertikal total power requirement 220 kW weight of the machine ca. 0,055 t dimensions of the machine ca. 0,46 x 0,4 x 0,42 m

Condition: used, Year of construction: 1990, Technical details: Gedpfx Adeu Nv Dpe Roui total power requirement: 1,5 kw weight of the machine approx.: 110 kg electrics - voltage/frequency: 380 / 50Hz V/Hz dimensions L x W x H: 1,0 x 0,55 x 2,4 m Application: for welding and dust air with filtration Air inlet: pipe connection Ø 150 x 60mm; intake flexible pipe 2-sectioned Exhaust air: flexible hose Ø 150mm to approx. 5 meters Operation via on/off switch *

Condition: used, Technical details: power consumption: 20 - 300 A welding current: U1 = 380 V connected load: 14 kVA weight of the machine approx.: 171 kg dimensions of machine: 0,9, x 0,5 x 0,92 m Transformer - Welding machine - Welding transformer Control: 14 levels for thin sheet metal and 14 levels for thick sheet metal air-cooled Protection class P 21 with electric welding gun with cable approx. 6.0 meters Gedpfsu Nwgrsx Ad Roui Ground clamp and earth cable approx. 4.0 meters *

Condition: new, number 93 Positionen weight 320 kg condition neu 28 mm dimensions 1,0 x 0,6 x 0,85 m Special 93-piece set, 28mm system Gedpfx Adsyv I Eae Rsui Includes tool trolley Material: Burnished high-quality steel Scope of delivery: see images

Condition: new, number 102 Positionen weight 320 kg condition neu 28 mm dimensions 1,0 x 0,6 x 0,85 m Special 102-piece set, 28mm system Gujdpfx Asyv I Hdjd Roi Includes tool trolley Material: Burnished high-quality steel Scope of delivery: see images

Condition: new, table length 2000 mm Gusdpfx Aeyv I Hwsd Rji table width 1000 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,45 t dimensions 2,0 x 1,0 x 0,9 m Welding table / perforated table including accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Surfaces that have been ground down and planed smooth. Hole diameter: 28mm, countersunk by 3mm 100 x 100mm grid Side panels 200mm Hole spacing in the side panels 50mm, diagonal grid Height adjustable from approx. 830 - 890mm Substructure reinforced with 140 x 15mm flat steel Including base bearings, 110mm diameter

Condition: new, table length 1200 mm table width 800 mm table height 980 mm weight of the machine ca. 0.95 t Workstation - Hole diameter: 28 mm - Grid: 100 x 100 mm - Side panels: 150 mm - Panel thickness: 10 mm Guodpoyv I Inefx Ad Roi

Condition: new, Welding electrodes 68 HH UTP, 4 mm diameter, 365 mm long Gsdpfx Asyml Ufod Roui

Condition: like new (used), Year of construction: 2025, Hot wire cutting system Manufacturer: MANZ Gujdpfx Adoznli Dj Rsi PLC control, touch screen display, Siemens

Condition: new, welding current max. 250 A Guedpfx Adey Aa Ito Rji open-circuit voltage max. 66 Volt connected load frequency 400 V weight 65 kg Dimensions (LxWxH) 900 x 500 x 750 mm MIG/MAG gas-shielded welding machine: incl. 3m hose package.

Condition: used, Year of construction: 1992, table diameter 600 mm table load 250 Kg swivelling range 0 - 135 Grad turning speeds 0,03 - 2,0 U/min connected load frequency 400 V weight 0,4 t Dimensions (LxWxH) 1,1 x 0,9 x 1,0 m Welding turntable including: - Foot switch - Wired remote control Gsdjygxzrepfx Ad Roui - 315mm chuck

Condition: new, number 70 Positionen weight 90 kg condition neu Gujdpfxjwth N Tj Ad Rsi 28 mm Special set 70 / 28 70-piece, 28mm system, consisting of: 3x Pipe clamps D28 90° – Item No. 4028397 3x Pipe clamps D28 180° – Item No. 4028396 3x Pipe clamps D28 45° – Item No. 4028398 3x Pipe clamps D28 300x150 – Item No. 4028399 3x Pipe clamps D28 300x200 – Item No. 4028400 15x Ball lock pins D28x50 – Item No. 4027663 10x Locking pins D28x80 – Item No. 4028876 4x Universal Stop D28 100x50x25 mm – Item No. 4028469 4x Universal Stop D28 150x50x25 mm – Item No. 4028470 4x Universal Stop D28 225x50x25 mm – Item No. 4027657 2x Universal Stop D28 300x50x25 mm – Item No. 4027659 2x Stop Clamping Angle D28 75x50x75x25 mm – Item No. 4028657 2x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 4028658 2x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 4028649 2x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 4028652 2x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 4028653 2x Stop Clamping Angle D28 275x50x175x25 mm – Item No. 4028654 2x Stop Clamping Angle D28 300 x 275 x 100 mm (1x left, 1x right) – Item No. 4028847 2x flat angle D28 175x175x25 mm 1x elongated hole + 3x round hole – item no. 4028655

Condition: excellent (used), Year of construction: 2021, Table Ø: 1000mm Guedpfx Adswvrbfo Roi Table load on 200 mm:600 Table load on 400 mm:400 Table load on 600 mm:280 Table load on 1000 mm:200 Rotation table: 360.000° Length: 1200mm Width: 1200mm Height: 1400mm Weight: 1200kg