Used Arburg A 270 90 350 Vertikal U Art 619 for sale (317)

Condition: excellent (used), Year of construction: 2006, Arburg 270 U 350-100U (2006) Universal machine / possible to use in horizontal, vertical position. Clamping force: 35 tons Kolhcovdu Dgedw Helr Distance between tie bars: 270 x 270 mm Platten dimensions: 380 x 380 mm Screw diameter: 25 mm Injection volume: 49 cm3 Shot weight (PS): 45 g Injection pressure: 2000 bar Equipment: Cores: 1+2 Heating zones: 3 Low hours: 54.000

Year of construction: 1988, Condition: good (used), hydraulic clamp vertical adapters for parting line molding capability clamp tonnage 40 ton Platen size 346 x 346 mm Distance between tie bars: 220 x 220 mm Maximum open daylight: 475 mm Mold opening stroke: 275 mm Minimum mold height: 200 mm Hydraulic ejector force: 2 ton Koljbqi Tbehcdw Hslr Hydraulic ejector stroke: 100 mm Screw diameter: 22 mm Shot size: 30 gram Optional screw-shot sizes: up to 30 mm Screw stroke: 95 mm Screw volume: 36 cm³ Maximum injection pressure: 91 kN (18,200 psi) Screw speed range: 10-580 rpm (infinitely variable) Hydraulic oil required: 190 liters (50 gallons) Dry cycles: 2520 per hour Pump Motor: 11kW (15HP) Overall length x width: 3.3 x 1.1m Height w/inj unit vertical: 2.8 m Weight without oil: 1700 kgs

Condition: good (used), Year of construction: 1995, operating hours: 104,536 h, Functionality: fully functional, machine/vehicle number: F40, clamping force: 400 kN, screw diameter: 25 mm, clearance between the columns: 270 mm, displacement volume: 49 cm³, mold height (min.): 200 mm, ejector stroke: 125 mm, opening stroke: 350 mm, overall weight: 5,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 63 A, Machine is currently in use. Can be viewed in operation. Kjlhcdsvrftbjw Hjlr

Year of construction: 2000, Condition: excellent (used), Injection moulding machine Arburg 221 K 350 - 100 U Year of manufacture: 2001 Control type: Selogica Closing system: Knee TECHNICAL DATA Closing force: 350 kN Clearance between columns: 221 mm Plate dimensions: 324 mm x 250 mm Mould size: min. 150 mm - 300 mm Kslhop At Rdscdw Hjlr Maximum opening distance: 200 mm Max distance between plates: 500 mm Screw diameter: 20 mm Injection volume / Injection weight: 31 ccm / 26 grams PS Injection pressure: 2500 bar GENERAL DATA Engine: 7.5 kW Heaters: 4.5 kW Operating hours: On request Dimensions L x W x D: 2.7 m x 1.4 m x 2.2 m Weight: 1060 kg

Condition: excellent (used), Year of construction: 1997, Arburg 270 M-350-90 U Closing 35 TO year 1997 Klelhcsg S I S Asdw Hjr Scrow 25 mm tie bar spacing 27x27

Year of construction: 2012, Condition: ready for operation (used), Installation height min./max.: 200mm/550mm, opening stroke: 350mm, closing force: 350kN, screw diameter: 20mm, distance between tie bars: 270mm, max. injection volume: 31cm³, operating hours: 61737h. Documentation available. On-site inspection is possible. Kslhst E Tq Dscdw Hjlr

Condition: good (used), Year of construction: 2015, Functionality: fully functional, Pump set consisting of three pumps 2 pieces - MOOG Mod D955Z8001/H Type HZ-R 18A1-RKP080KM28R1Z00DS1 V = 80 cc P = 280 bar n max = 1800 rpm Klolhcdjv Tuvnew Her ARBURG Type: A10VS0 18 DFR1/31R-VRA12KB2 V = 18 cc DR = 260 bar n = 1450 rpm

Year of construction: 2007, Condition: ready for operation (used), This Arburg Allrounder 820 S 4000-1300/350 was manufactured in 2007. It is a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing. Contact us for more information about this machine. Application Types Injection Moulding Kjlhov T D R Iscdw Helr

Condition: excellent (used), Year of construction: 2012, Arburg 375V 500-100 / Vertical injection molding machine with rotary table Year of construction: 2012 Injection unit: Screw diameter: 20 mm Injection weight: 29 g Injection pressure: 2500 bar Metering volume: 31 ccm Clamping unit: Clamping force: 50 t Distance between tie bars: 0x0 mm Size of the clamping platens: 504x424 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: Very good technical condition Tie-bar-less machine Operating hours: 30,000 h in automatic mode Hydraulic core pull x 1 Control unit with hot runners x 6 Hardened injection unit - bimetal Turntable diameter: 900 mm Very precise turntable, driven by a servo motor, controlled by an inverter Self-closing nozzle Built-in quality control system Infrared safety curtains Dimensions: Weight: 3380 kg Length/width/height: 2.52x1.47x3.25 m Drive: Pump/motor: 18 kW Klelowcmlfjhcdw Hor Heating output: 4.9 kW Total output: 22.9 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2013, operating hours: 42,160 h, Functionality: fully functional, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 2 bar, injection weight: 184 g, overall weight: 11,200 kg, Arburg 1500T 2000-400 rotary table vertical machine Machine no. 225999 You can find the complete equipment on the downloadable documents - machine card Control: Selogica « Year of manufacture, 2013 * Total machine cycles only 1,907,296 « Operating hours automatic 42160 Clamping unit Plate spacing: 700 mm Clamping force: 200 to/ 200 kN Tool installation height: 400 mm Table diameter: 1500 mm Angle of rotation: 180° Rotation time: 2.4 s min. Weight on rotary table: 1050 kg Ejector force: 45 kN/ 175 mm ejector travel Injection unit Screw diameter: 40 mm Displacement: 201 cc Injection weight: 184 gr. Injection pressure: 2000 bar Extras « 2-station rotary table 180° forward/backward alternating with servo-electric rotary drive and hydraulic fixing pin for fine centering of the rotary plate in the end position; separating protection between the closing and insertion area, height adjustable on the rotary plate to the tool bases, with the option of attaching media lines and connections for the tool bases - Rotary table diameter mm 1500 - Closing force max. kN 2000 Injection unit according to EUROMAP 400 Screw diameter 40mm Special model rotary table ergonomic design with the following features: © - Corrosion protection treatment for rotary table (VE 574/90) © - Water connections 2 circuits © -3 hydraulic connections for needle closure system © -3 x core pull © -Per station: one core pull and 2 x temperature control Kelheuuf Iaocdw Holr © -6 x tool temperature control © -12 zone tool heating circuits © -Kistler internal pressure sensors (2x) © -Temperature query for start-up parts Weight: 11,200 kg. Energy: 22KW motor - heating power: 9.4 KW 5 zones - connection value 100 A the machine is offered functionally tested fully functional with commissioning guarantee - tested before dismantling For information about the machines we offer and our company - we only sell our own machines purchased from ongoing production from our Hanover warehouse - all machines offered are checked and tested before dismantling - we do NOT sell insolvency goods - we are NOT an agent who deals with third-party property. - all machines offered come from successful companies for which maintenance and care is a matter of course - all machines offered can be viewed in our warehouse

Condition: ready for operation (used), Year of construction: 1996, General Data Machine weight 4000 kg Clamping Unit Clamping force 1300 kN Kslhjv T D Rbocdw Hjlr This Arburg Allrounder 420C 1300-350 was manufactured in 1996. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Arburg Allrounder 420C 1300-350 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Metering volume: 139 ccm Clamping unit : clamping force: 130 t tie bar distance : 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Kjlhcdwswcna Ro Hjlr Proportional valve on the injection unit - precise injection The built-in system for control of pressure quality from the brand Sensor Kistler - measurement of mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), Year of construction: 1999, Functionality: fully functional, Clamping cylinder removed from Arburg 420C 1000-350/150 Keljv T Niijhcdw Holr Clamping force 1000 kN

Condition: good (used), Year of construction: 2001, operating hours: 56,380 h, Used injection molding machine The machine has a complete history with all important repair work and components replacement hoses etc. Manufacturer: Arburg Type: 420C 1300-350 Year of construction: 2001 Machine no. 184172 Control system: Selogica Operating hours: 56380 h constant maintenance by manufacturer clamping unit Clamping force: 1300 kN/ 130 tons Distance between tie bars: 420 x 420 mm Mold mounting platens: 570 x 570 mm Ejector stroke: 175 mm / 40 kN Opening stroke: 500 mm Kljlhcovimd Nsdw Hjr Tool installation height: 250 mm Distance between platens: 750 mm max. Injection unit Injection volume: 145 ccm Injection weight: 127 g Cgu3U8W0U Screw diameter: 35 mm Injection pressure: 2500 bar Extras Hydraulic core pull - Available immediately from our warehouse in Hanover, free on delivery or free to your door against freight reimbursement - Functionally tested (guaranteed function until first commissioning)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 64,344 h, Injection Unit Stroke volume 16 ccm Clamping Unit Clamping force 400 kN Kjlhcdwev T D Rzs Helr Opening stroke 350 mm Distance between bars 270 mm Mould height min 200 mm Additional Equipment Oil Cooling: Programmable oil temperature regulation with heat exchanger. Injection Control: 3-stage injection regulation (30-290 mm/s). Nozzle Control Block: T2 type for 270-570 CG series. Clamping Unit: WKZ-Schließeinheit 270 CS (base configuration). Minimum installation height: 200 mm. Control System: CPU: Pentium III with USB interface. / I/O Cards: Digital (L-ARB 790) and analog (L-ARB 798) modules. /Temperature Control: 12-channel programmable card (L-ARB 777). S-Systemdiskette CS/S/A/U (Version 03.060-00.000). Direct Graphics Interface (Version 04.060-00.000). Coolant Distribution: Regulated coolant circuits with manual valves and measuring pipes. / Additional connections for free inlet/outlet. Injection Unit Stroke volume 16 ccm Clamping Unit Clamping force 400 kN Opening stroke 350 mm Distance between bars 270 mm Mould height min 200 mm Additional Equipment Oil Cooling: Programmable oil temperature regulation with heat exchanger. Injection Control: 3-stage injection regulation (30-290 mm/s). Nozzle Control Block: T2 type for 270-570 CG series. Clamping Unit: WKZ-Schließeinheit 270 CS (base configuration). Minimum installation height: 200 mm. Control System: CPU: Pentium III with USB interface. / I/O Cards: Digital (L-ARB 790) and analog (L-ARB 798) modules. /Temperature Control: 12-channel programmable card (L-ARB 777). S-Systemdiskette CS/S/A/U (Version 03.060-00.000). Direct Graphics Interface (Version 04.060-00.000). Coolant Distribution: Regulated coolant circuits with manual valves and measuring pipes. / Additional connections for free inlet/outlet. This Arburg Allrounder 270 C 400-70 was manufactured in 2007. A hydraulic injection moulding machine, it's ideal for precision plastic processing. Consider the opportunity to buy this Arburg Allrounder 270 C 400-70 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Metering volume: 139 ccm Clamping unit: clamping force: 130 t tie bar distance: 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The built-in system for control of the pressure quality from the brand Sensor Kistler - measurement of the mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Kolowcna Dshcdw Hslr Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), Year of construction: 1999, Functionality: fully functional, Injection unit Type 350 Removed from Arburg 420C 1000-350/150 Screw diameter 40 mm Klslhov Tp Irocdw Her Complete with Danfoss OTM 250 hydraulic motor, valves, etc.

Condition: like new (used), Year of construction: 2007, operating hours: 47,800 h, Functionality: fully functional, machine/vehicle number: 203241, Used injection molding machine - New screw with original Arburg Multilift H The machine has a complete history with all major repairs and component replacements such as the screw, cylinder, etc. (In addition, the annual oil and filter changes, etc., were of course performed.) See document for download Manufacturer: Arburg Type: 470C 1500-350 Year of manufacture: December 2007 Klelhcdsvhb Iyew Hsr Machine No. 203241 Control: Selogica Operating hours: 47,800 h Continuous maintenance by manufacturer Clamping unit Clamping force: 1500 kN/150 tons Tie-bar spacing: 470 x 470 mm Mold clamping platens: 650 x 650 mm Ejector stroke: 175 mm Opening stroke: 500 mm Mold installation height: 250 mm Clamping platen spacing: 750 mm max. Injection unit Injection volume: 145 cc Injection weight: 127 g Screw diameter: 35 mm Injection pressure: 2500 bar Extras Multilift H Handling interface Core puller - Available immediately from our Hanover warehouse, free on load or free to your door with freight reimbursement - Functionally tested (guaranteed functionality until first commissioning)

Condition: ready for operation (used), Year of construction: 2003, General Data Machine weight 3800 kg Injection Unit Screw diameter 145 mm Kljlhcdsv S Ncgow Her Clamping Unit Clamping force 800 kN Opening stroke Max. 450 mm Distance between bars 420 x 420 mm This Arburg Allrounder 420 S 800-350 was manufactured in 2003. A robust injection moulding machine featuring a closing force of 800 kN, opening travel max of 450 mm, and a distance between clamping plates of 750 mm. It has a clear column spacing of 420x420 mm and a net weight of 3800 kg. A great opportunity to buy this Arburg Allrounder 420 S 800-350 injection moulding machine. Contact us for further details. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2000, Arburg 370S 800-350 Year of manufacture: 2000 Injection unit: Screw diameter: 35 mm Injection weight: 117 g injection pressure: 2500 bar Metering volume: 139 ccm Clamping unit : clamping force: 80 t tie bar distance : 370x370 mm size of clamping platens: 570x570 mm Ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap Robot interface Hydraulic core pull x 2 Injection unit hardened - bimetal Built-in sorting flap Integrated lateral original Arburg sprue picker Dimensions: Weight: 3800 kg Length/width/height: 4.06x1.39x2.12 m Klelhcowcmv Dedw Hor Drive: Pumps/motor: 18.5 kW Heating power: 10,2 kW Total power: 28,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), Year of construction: 2001, operating hours: 74,930 h, General Data Measurements width 1600 mm Measurements depth 4350 mm Measurements height 1800 mm Machine weight 4500 kg Kljlhcjv Utrdedw Hjr Injection Unit Screw diameter 40 mm Shot weight 166 g (PS) Injection pressure 2120 bar Clamping Unit Clamping force 1300 kN Opening stroke 500 mm Distance between bars 420 x 420 mm Mould height min 250 mm Size of mold platens 750 mm This Arburg Allrounder 420 C 1300-350 was manufactured in 2001. A robust injection moulding machine with a clamping force of 1300 kN and a screw diameter of 40 mm. It features a maximum shot weight of 166 g PS and an injection pressure of 2120 bar. Ideal for precise, large-scale production, the machine we have for sale represents a significant opportunity for efficiency. Contact us for further details regarding this injection moulding machine. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2003, Arburg 420S 800-350 Year of construction: 11.2003 Injection unit: Screw diameter: 50 mm Injection weight: 250 g Injection pressure: approx. 1300 bar Dosing volume: 288 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping platens: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Klelhcdewcmvwow Her Additional equipment: Euromap 12 Robot interface Air valve x 1 Core pull control Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Integrated original Arburg side sprue picker Dimensions: Weight: 3800 kg Length/width/height: 4.06x1.39x2.12 m Drive: Pump/motor: 18.5 kW Heating output: 10.2 kW Total output: 28.7 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1996, Arburg 320M 750-90 Year of construction: 1996 Injection unit: Screw diameter: 25 mm Kljlhcdwswcmt No Hor Injection weight: 26 g Injection pressure: 2500 bar Metering volume: 31 ccm Clamping unit: Clamping force: 75 t Distance between tie bars: 320x320 mm Size of the clamping platens: 490x490 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MULTRONICA Additional equipment: Air valve x 1 It is possible to position the spraying unit vertically It is possible to change the screw diameter for fi 20, 30, 35 mm Dimensions: Weight: 2360 kg Length/width/height: 4.24x1.90x2.05 m Drive: Pump/motor: 15 kW Heating output: 4.6 kW Total output: 19.6 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2003, Arburg 320S 350-60 Year of construction: 07.2003 Injection unit: Screw diameter: 18 mm Injection weight: 18 g Injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 35 t Distance between tie bars: 320x320 mm Size of the clamping platens: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Control unit with hot runners Hardened injection unit - bimetal Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Built-in sorting flap and conveyor belt Dimensions: Weight: 2150 kg Length/width/height: 3.32x1.21x1.81 m Klolhcjwcmh Tedw Her Drive: Pump/motor: 7.5 kW Heating output: 2.7 kW Total output: 10.2 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2004, Arburg 320S 350-150 with the Wittmann W621 robot Year of construction: 2004 Injection unit: Screw diameter: 25 mm Injection weight: 49 g Injection pressure: 2500 bar Metering volume: 54 ccm Clamping unit: Clamping force: 35 t Distance between tie bars: 320x320 mm Size of the clamping platens: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 67 Klslhcdwowcmhmj Hjr Robot interface Air valve x 2 Hydraulic core pull x 2 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Original mold crane Robot Wittmann W621 Year of manufacture: 2005 5-axis robot: 3 axes are driven by servomotors (electric); axis B (rotation) and axis C Travel in axes: X-550, Y-1000, Z-1500 Touch control panel Robot with adapter Purchase of the robot for an additional charge Dimensions Weight: 2250 kg Length/width/height: 3.44x1.24x2.04 m Drive: Pump/motor: 18.5 kW Heating output: 9.4 kW Total output: 27.9 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request