Used Arburg A 220 90 350 Art 585 for sale (307)

Condition: excellent (used), Year of construction: 1996, Arburg 220M-350-90 Clamping force: 35 tons Year of manufacture: 1996 Fpsdpfx Ajx Nwi Ijdceh Screw diameter: 20 mm Tie bar distance: 22x22

Condition: used, Year of construction: 2002, Machine is in good condition and can be inspected in operation upon appointment. Availability: 06/2026 Full technical specifications in the attached document Clamping force: 1300 kN Opening force: 35/350 kN Opening stroke: 500 mm Fpedpeyx D Ngsfx Adcoh Mould installation height (min): 250 mm Distance between platens (max): 750 mm Tie bar spacing: 420 x 420 mm Ejector force: 40 kN Ejector stroke: 175 mm Screw stroke: 145 mm Screw diameter: 35 / 40 / 45 mm Injection pressure: 2500 / 2120 / 1670 bar

Condition: refurbished (used), functionality: fully functional, clamping force: 350 kN, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 221KS 350/100 U injection moulding machine. Fitted with a Selogica controller. This is a universal machine from Arburg which allows for the clamp unit to be pivoted vertically, ideally suited to insert moulding. These small machines are sought after for the many moulding options they can suit, from a very compact machine. Occasional vertical moulding requirement? These machines are ideal. In standard horizontal configuration, they operate the same as any traditional machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Fsdpfx Adjwqnggocjph Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Please note that the video shown is of a near identical machine previously refurbished by STV Machinery. It’s a good example of what can be expected once this machine is fully refurbished by our team. *The video shown in this listing is of a previously refurbished Arburg 221 which is similar to the Arburg 221KS machine we are currently refurbishing. Please contact the team if you would like to see the machine in person.

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, 2000 Arburg projector. 130 tons of closing force. The machine is delivered completely reconditioned in our facilities in Heras (Cantabria). New gaskets in the sealing body. We can show it in operation. Fedpfx Aerxtpdodcoph Technical details CLOSING POWER 1300 kN PLATE DIMENSIONS 660x840 OPENING STROKE 575mm MAXIMUM DISTANCE BETWEEN PLATES 800/850 DISTANCE BETWEEN COLUMNS 420x420/470x470 SPINDLE 50mm INJECTION VOLUME 353cm3 INJECTION WEIGHT 117 YEAR OF MANUFACTURE 2000 INJECTION PRESSURE 2500bar

Condition: good (used), Year of construction: 2004, operating hours: 29,461 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, injection weight: 140 g, For sale: a well-maintained Arburg 570C-2000-350 2K injection moulding machine from 2004, with only approximately 30,000 operating hours. The machine is in good technical condition and is immediately ready for production. Specifications: Model: Arburg 570C Clamping force: 2000 kN Screw diameter: 35 mm (350) Year of manufacture: 2004 Operating hours: approx. 30,000 Control system: Arburg Selogica Fjdpfx Aoxyyxqjdcoph Configuration: Standard injection moulding setup, reliable and versatile Condition & Maintenance Machine always serviced as per schedule No significant fault history Clean and fully functioning hydraulic and electrical system Extras (optional) Other screw sizes available.

Condition: good (used), machine/vehicle number: 181825, clamping force: 800 kN, For sale is an injection moulding machine from Arburg, model Allrounder 370 S 800-350. The machine is in good condition. Technical Data: Arburg Allrounder 370 S 800-350 Injection Moulding Machine - Operating hours: - Machine cycles: 8,011,944 - Pump: 69,544 h Fpodpfxjxt E Tyo Adcjh - Automatic operation: 59,358 h - Clamping force: 800 kN (approx. 80 tons) - Tie bar spacing (H x V): 370 mm x 370 mm (clearance between tie bars) - Mounting platen dimensions (H x V): 545 mm x 545 mm - Maximum opening stroke: 500 mm (variable) - Minimum mould height: Min. 250 mm, partially also min. 200 mm depending on configuration - Maximum daylight: Max. approx. 650 mm−750 mm, depending on minimum mould height - Ejector force: Typically approx. 35 kN Transport and loading can be organised Europe-wide for an additional fee upon request. Prices are exclusive of VAT. Viewing is possible by appointment. Contact us, our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you require a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Year of construction: 2002, condition: ready for operation (used), An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible. Fsdpoyddy Iofx Adcjph

Year of construction: 2003, condition: ready for operation (used), Clamping force: 1300kN, screw diameter: 40mm, max. injection pressure: 2120bar, shot volume: 182m³, shot weight: 153g, tie bar spacing: 470mm/470mm, platen dimensions X/Y: 650mm/650mm, min. mold installation height: 275mm, max. opening stroke: 850mm, centering: 125mm. Machine dimensions X/Y/Z: approx. 4600mm/1600mm/2200mm, weight: approx. 5500kg. The clamping unit shows an oil leakage at the clamping cylinder. Documentation available. An on site inspection is possible. Fpedpfeygw Siex Adceh

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, Opening stroke: 500mm, min. installation height: 250mm, Platen distance: 750mm, Tie bar spacing X/Y: 420mm/420mm, Platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, Ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, Weight: approx. 4300kg, Operating hours: approx. 80131h. The machine is defective and no longer functional or operational. Can only be used as a spare parts carrier. Documentation available. An on-site inspection is possible. Fpedpfxjyddzfs Adcjh

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-M-500-90 Year of manufacture: 1995 Serial number: 164822 Control system: Control unit: Arburg Multronica Injection unit: Injection type: vertical injection unit Screw diameter: Ø 20 mm Clamping unit: Fjdpfxox Eitbe Adcoph Clamping force: 500 kN Additional equipment: Pick system: part removal system Divider chute: separating chute / selective chute Enclosure: full protective enclosure

Condition: used, Arburg double axial pump AKP28 + AKP10- removed from Arburg Allrounder 275 V 25 removed from running machine - fully functionalmanufacturer: Arburg Fpedpfju Tv A Rsx Adcoh type: AKP28 + AKP10 spare part no.: 250.957 manufacturer no.: R9 R9Type code: A10VS0 28 DFR1/31R-PPA12KB2-S1894, A10VS0 10 DFR1/52R-VSA14N00-S2679The number before the first slash describes the device series. For this reason, this digit of the type code on your old spare part may differ. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, number of injections: 2, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 520S 1600 290/70 – 2-component machine Year of manufacture: 2009, from first German owner Fjdpfx Adoyzumzecoph - Total cycles: 12.3 million - Manual operation: 86,565 hours - Automatic operation: 78,099 hours Injection units (2K) Injection unit 1 – horizontal - 290 - Screw diameter: 25 mm - Shot volume: 71 cm³ Injection unit 2 – vertical - 70 - Screw diameter: 18 mm - Shot volume: 21 cm³ Clamping unit Mounting platens: 695 x 695 mm - Maximum platen distance: 925 mm - Opening stroke: 675 mm - Minimum mould height: 250 mm - Electric index rotation: present Extras Hot runner / additional axes - 12-zone hot runner integrated - 3x core pulls - 2x blow-out functions → incl. actuation for needle shut-off - Various customer-specific inputs and outputs Interfaces / Communication - ALS - Connection for temperature control units - Connection for dryers Handling / Multilift H (6 kg) - 2x vacuum circuits - 5x double-acting gripper functions - Z-axis servo-driven, 800 mm stroke - C, G, X, and B axes pneumatically actuated - Various customer-specific inputs and outputs → incl. gripper monitoring Complete maintenance log for the past 3 years - Both injection units re-sealed by Arburg - Clamping unit completely re-sealed by Arburg - Accumulator bottles replaced by Arburg in 2020 Warranty Warranty valid until initial commissioning Loading/shipping Free loading onto buyer’s truck or free delivery (CPT) for reimbursement of freight costs Worldwide delivery Available ex stock in Hannover, Germany Information about our offered machines and company: - We only sell machines that we have purchased from active production, available from our warehouse in Hannover - All offered machines are inspected and tested before dismantling - We do NOT sell insolvency goods; we are NOT intermediaries dealing with third-party assets - All machines offered originate from successful companies where regular maintenance and care are a matter of course - All offered machines can be inspected at our warehouse

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 Fpjdpfx Adeyxdwdecsh • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: new, Year of construction: 2010, operating hours: 72,154 h, clamping force: 800 kN, screw diameter: 25 mm, displacement volume: 54 cm³, ARBURG Allrounder 900 T 800-150 Stock no.: 503576 Manufacturer: ARBURG Fjdpfx Adjytd Spjcsph Model: Allrounder 900 T 800-150 Control system: Year of manufacture: 2010 Operating hours: 72,154 h Technical Data – Clamping Unit Clamping force: 800 kN Tie bar spacing (h x v): 900 x 900 mm Min. mould height: 250 mm Max. daylight between platens: 550 mm Opening stroke: 300 mm Rotary table diameter: 900 mm Ejector stroke: 150 mm Ejector force: 46 kN Centric location, moving platen (D): 90 mm Centric location, fixed platen (D): 90 mm Technical Data – Injection Unit Screw diameter: 25 mm Shot volume: 54 ccm Injection pressure: 2,500 bar Screw length: 24 l/d Screw torque: 210 N Plasticising rate: 49 g/s PS Free-flow injection rate: 80 g/s PS Dimensions & Weight Machine dimensions (LxWxH): 3.8m x 1.85m x 2.15m Total weight: 5,000 kg Equipment Display text in German 1x air valve Machine with rotary table Machine with water manifold Levelling elements BDE interface

Condition: ready for operation (used), Year of construction: 2020, clamping force: 2,200 kN, screw diameter: 70 mm, injection weight: 172 g, This Arburg 570 S 2200-800/290 was manufactured in 2020. It features a hydraulic drive system and the Selogica control system for precise operations. With a clamping force of 2,200 kN and a screw diameter of 40 mm, it is ideal for detailed injection moulding tasks. Consider the opportunity to buy this Arburg 570 S 2200-800/290 hydraulic injection moulding machine. Contact us for more information. Clamping unit • Distance between tie bars: 570 × 570 mm Fpsdpex Nkp Iefx Adcjh • Opening stroke: 650 mm • Ejector force: 70 kN • Ejector stroke: 200 mmInjection unit • Injection unit size: 290 • Injection pressure: 2,500 bar • Shot volume: 188 cm³Drive & control • Drive system: Hydraulic • Control system: ARBURG Selogica

Condition: ready for operation (used), Year of construction: 2014, clamping force: 1,000 kN, screw diameter: 35 mm, injection weight: 132 g, overall weight: 3,650 kg, This Arburg Allrounder 420C 1000-290 was manufactured in 2014. It features a clamping force of 1000 kN, an opening stroke of 500 mm, and a platen size of 570x570 mm. Max shot weight is 132 g. Consider the opportunity to buy this Arburg Allrounder 420C 1000-290 hydraulic injection moulding machine. Contact us for more information. • Opening stroke: 500 mm Fsdsyglrwepfx Adcoph • Platen size: 570 x 570 mm • Max. volume: 144 cm³

Condition: good (used), Year of construction: 2003, operating hours: 106,864 h, clamping force: 1,300 kN, screw diameter: 35 mm, The machine was very well looked after, service and maintenance were always carried out on time. Good condition, fully functional Still in use until week 11 Further service reports and documents available Technical data: YEAR OF MANUFACTURE: 2003 Automatic operation: 106,864 h Clamping force: 1300 kN Screw diameter: 35 mm Screw stroke: 180 mm Closing force: 50 kN Opening stroke: 500 mm distance between ejector plates: 750 mm Ejector force: 40 kN Advance package Fodjrp Dyrjpfx Adcsph - VE561/20 LGS Position-regulated screw with control valve on the injection unit for particularly high dynamics and reproducibility of the injection process, the back pressure is regulated, the nozzle contact force is manually adjustable - VE 557/00 AES Energy-saving system for automatic performance optimization and corresponding energy energy saving through infinitely variable adjustment of the pump drive speed to the respective power requirement of the spraying cycle - VE 460/00 ED Electromechanical metering drive via a speed-controlled three-phase asynchronous motor to increase productivity through simultaneous movement, through gentler material preparation and corresponding energy savings compared to hydraulic dosing On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: ready for operation (used), Year of construction: 2011, operating hours: 41,881 h, functionality: fully functional, machine/vehicle number: 217330, clamping force: 2,200 kN, screw diameter: 40 mm, injection pressure: 2,200 bar, mold height (min.): 450 mm, ejector force: 70,000 N, TECHNICAL DETAILS Clamping force (hydraulic): 2,200 kN Max. platen distance: 1,100 mm Min. mold height: 450 mm Ejector force: 70 kN Ejector stroke: 200 mm Ejector length: 110 mm Number of hydraulic core pulls: 2 Injection volume: 201/215 cm³ Specific injection pressure: 2,200/1,620 bar Screw diameter: 40/35 mm Nozzle radius: 15 mm MACHINE DETAILS Heating power (electric): 13.6 kW Motor power (electric): 30 kW Operating hours: 41,881 h EQUIPMENT Handling unit GEKU SR 500 SH, year of manufacture: 2011 Fpodpfx Adew Suy Iecoh Conveyor belt "16"

Condition: ready for operation (used), Year of construction: 2017, operating hours: 16,948 h, functionality: fully functional, machine/vehicle number: 239279, clamping force: 2,200 kN, screw diameter: 40 mm, injection pressure: 2,200 bar, mold height (min.): 450 mm, ejector force: 70,000 N, TECHNICAL DETAILS Fpjdpew Su A Nsfx Adcsh Clamping force (hydraulic): 2,200 kN Max. platen spacing: 1,100 mm Mould height: min. 450 mm Ejector force: 70 kN Ejector stroke: 200 mm Ejector length: 110 mm Number of hydraulic core pulls: 2 Injection volume: 201/215 cm³ Spec. injection pressure: 2,200/1,620 bar Screw diameter: 40/35 mm Nozzle radius: 15 mm MACHINE DETAILS Electric power heating/motor: 13.6/30 kW Operating hours: 16,948 h EQUIPMENT Handling industrial robot SEPRO Stäubli 6X 160

Year of construction: 2018, condition: ready for operation (used), A compact Arburg injection molding machine is available. Clamping force: 180kN, daylight: 221mm/221mm, platen dimensions X/Y: 400mm/400mm, max. opening stroke: 275mm, min. mold installation height: 150mm, max. platen distance: 425mm, ejector force: 18kN, ejector stroke: 95mm, screw diameter: 15mm, weight: approx. 1900kg, operating hours: approx. 23300h. Documentation available. An on-site inspection is possible. Fpsdpsx E Ac Ejfx Adcoh

Year of construction: 1997, condition: ready for operation (used), Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible. Fpedpfsrc Hibex Adcsh

Condition: good (used), Year of construction: 2005, Ref. no.: 18591 Fsdpfx Aoxf T I Nodceph Manufacturer: ARBURG Type: 520 A 1600-400 All Electric Year of construction: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m Further information: The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes. These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential. Typical features of this series include: * Fully electric drive for all main movements * High energy efficiency compared to hydraulic machines * Excellent injection and positioning accuracy * Quiet and clean operation (also suitable for medical applications) * Low maintenance requirements The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics. ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Fpodozcwmlepfx Adcoh Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2011, 2x ARBURG A 170 S 180-30 Trennebene (S&P 3798) Fpodpszcwi Tefx Adcsh Manufacture year: 2011 Operating hours: 38,396 Stunden Screw: 15 mm Injection pressure: 2200 bar Stroke volume: 10,6 cm³ Clamping Force: 18 t Tie bar distance: 170 x 170 mm Mould installation height min.: 150 mm Plate distance max.: 350 mm Dimensions: 2600 x 1400 x 2000 mm Eeight: 1720 kg Connected load: 11 + 4 = 15 kW price: on request Option parting line, hotrunner 6x, Robot Interface EM67, Interface Colorizing, corepuller, crane 350 kg Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Fodpfx Ajzcwi Hjdcoph Operating hours: 29,844 Stunden Screw: 40 mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Price: on request contact: Mr. Ralf Schulz