Used Arburg 221 for sale (352)

Year of construction: 1993, condition: ready for operation (used), A total of six old injection molding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350kN, injection pressure: 1500bar, injection weight: 35g/hp, screw diameter: 22mm, centering bore: 110mm, mold opening stroke: 330mm, control: defective. 2) Arburg 305 ECO 700-230, year of manufacture: 1989, clamping force: 700kN, screw diameter: 40mm, centering bore: 125mm, mold height min./max.: 190mm/420mm, tie bar distance X/Y: 305mm/135mm, mold opening stroke: 250mm, control: defective. 3) Arburg 305-210-700, year of manufacture: 1982, clamping force: 700kN, injection pressure: 1500bar, injection weight: 117g/hp, screw diameter: 35mm, centering bore: 125mm, mould height min./max.: 200mm/400mm, tie bar distance: 305mm. 4) Arburg 221-75-350, year of construction: 1992, clamping force: 350kN, injection pressure: 1500bar, screw diameter: 22mm, centering bore: 110mm, mould height min./max.: 150mm/300mm, tie bar distance: 221mm. 5) Arburg 221-55-250, year of construction: 1991, clamping force: 250kN, injection weight: 32g/hp, screw diameter: 20mm, mold height min./max.: 150mm/300mm, tie bar distance: 320mm. 6) 2K injection molding machine Arburg 221-75-350, year of construction: 1993, clamping force: 350kN, injection pressure: 1500bar, injection weight: 38g/hp, screw diameter: 22mm, mold height min./max.: 150mm/300mm, tie bar distance: 221mm. Including 7-8 Arburg dryers, various injection units, compressor AirComp, mixing unit liquid-silicone with Arburg control and Scheugen plow. Documentation available. An on-site inspection is possible. Isdsvb Hbfopfx Addotb

Condition: excellent (used), Year of construction: 2004, Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Isdpfx Adouykh Dsdjtb Tie bar daylight: 221 mm Mould clamping plattens (b x h) : 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 25 mm Screw stroke: 100 mm Injection volume: 70 cm3 Shot weight: 59 g Injection pressure: 1040 bar Working hours: 34.748

Condition: excellent (used), Year of construction: 2003, Arburg 221 K 350 - 100 injection molding machine Year of manufacture: 12/2003 Horizontal/vertical machine - stand-up unit Control type: Selogica Closing system: Knee TECHNICAL DATA Closing force: 350 kN Clearance between columns: 221 mm Plate dimensions: 324 mm x 250 mm Mould size: min 150 mm - 300 mm Maximum opening stroke: 200 mm Itsdpowa R T Ijfx Addsb Max distance between plates: 350 mm - 500 mm Screw diameter: 20 mm Injection volume / Injection weight: 31 ccm / 26 grams PS Injection pressure: 2400 bar GENERAL DATA Engine: 7.5 kW Heaters: 3.5 kW Operating hours: approx. 47,000 h Dimensions L x W x H: 2.7 m x 1.4 m x 1.7 m Weight: 1150 kg

Condition: excellent (used), Year of construction: 1999, Arburg 221KS 250-75 / Universal machine Year of manufacture: 1999 injection unit: Screw diameter: 20 mm injection weight: 26 g Injection pressure: 2350 bar Metering volume: 31 ccm Clamping unit: Clamping force: 25 t tie bar distance: 221 mm size of clamping platens: 342x250 mm ejector: hydraulic clamping unit: toggle lever Control system: SELOGICA Itedpfx Aex Ng A Deddsb Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core pull control injection unit hardened - bimetal Clamp for fixing the injection unit vertical Dimensions: Weight: 1150 kg Length/width/height: 2.63x1.34x1.93 m Drive: Pump/motor: 5.5 kW Heating power: 4,6 kW Total power: 10,1 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: refurbished (used), functionality: fully functional, clamping force: 350 kN, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 221KS 350/100 U injection moulding machine. Fitted with a Selogica controller. This is a universal machine from Arburg which allows for the clamp unit to be pivoted vertically, ideally suited to insert moulding. These small machines are sought after for the many moulding options they can suit, from a very compact machine. Occasional vertical moulding requirement? These machines are ideal. In standard horizontal configuration, they operate the same as any traditional machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Please note that the video shown is of a near identical machine previously refurbished by STV Machinery. It’s a good example of what can be expected once this machine is fully refurbished by our team. *The video shown in this listing is of a previously refurbished Arburg 221 which is similar to the Arburg 221KS machine we are currently refurbishing. Please contact the team if you would like to see the machine in person. Itodpfx Adswqnggjdob

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 199479, clamping force: 250 kN, screw diameter: 30 mm, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 270U 250-170 injection moulding machine. Fitted with a Selogica controller. This machine is the four tie bar variant with good size platens for maximum versatility from a small clamp machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Itodpfsx U Ax Eex Addob Please note that the video shown is of a near identical machine previously refurbished by STV Machinery. It’s a good example of what can be expected once this machine is fully refurbished by our team.

Condition: refurbished (used), operating hours: 22,000 h, In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. Itedpfx Adjl Tnz Eodob This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free with a 3 month (parts only) warranty. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we'll do the rest.

Year of construction: 2006, condition: ready for operation (used), This Arburg Allrounder 1200T 800-150 was manufactured in 2006. A vertical injection moulding machine, it offers robust functionality for specialized plastic processing tasks. Consider the opportunity to buy this Arburg Allrounder 1200T 800-150 vertical injection moulding machine. Contact us for more information. Itodpfx Aeyaizpeddsb Machine Benefits Technical Machine Benefits • Clamping force: 800 kn • Distance of the tie bars: 1200 mm / screw diameter: 25 mm / max part weight (g, ps): 45 / core pull: 1 • Configuration: vertical

Year of construction: 2003, condition: ready for operation (used), screw diameter: 45 mm, This Arburg Allrounder 630S 2500-675 was manufactured in 2003. It is a hydraulic injection moulding machine featuring a screw diameter of 45mm. Consider the opportunity to buy this Arburg Allrounder 630S 2500-675 hydraulic injection moulding machine. Contact us for more information. Isdpeyaiziofx Addstb

Condition: ready for operation (used), Year of construction: 2010, screw diameter: 25 mm, This Arburg 470 S 800-170 was manufactured in 2010. A hydraulic injection moulding machine featuring a clamping force of 80 tons and tiebar spacing of 470x470 mm. It operates on 400 V 3~ 50 Hz with a total connected load of 76 kW. Consider the opportunity to buy this Arburg 470 S 800-170 hydraulic injection moulding machine. Contact us for more information. Isdpfx Aox D R Epeddotb • Tiebar spacing: 470x470 • Single platen: Yes • Operating voltage: 400 V 3~ 50 Hz • Control voltage: 230 V ~ 50 Hz, 24 V DC • Motor/heating rated current: 76 / 59 A • Total rated current: 135 A • Total connected load: 76 kW

Condition: ready for operation (used), Year of construction: 2013, operating hours: 54,526 h, screw diameter: 35 mm, This Arburg 520 H 1500-400 was manufactured in 2013. A hydraulic injection moulding machine with a closing force of 150t and a screw diameter of 35mm, it operates on 400V 3∼, 50Hz with a total connected load of 89kW. Consider the opportunity to buy this Arburg 520 H 1500-400 hydraulic injection moulding machine. Contact us for more information. Iodpfx Aox D Rk Esddstb • Operating voltage: 400 V 3~, 50 Hz • Control voltage: 230 V, 50 Hz; 24 V~ • Motor/heating rated current: 90/69 A • Total rated current: not specified • Total connected load: 89 kW

Condition: ready for operation (used), Year of construction: 2011, operating hours: 68,463 h, screw diameter: 35 mm, This Arburg 470 E 1000-700 was manufactured in 2011. A robust electrical injection moulding machine, it features a closing force of 100 tons and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 78kW, it's designed for efficient performance. Consider the opportunity to buy this Arburg 470 E 1000-700 electrical injection moulding machine. Contact us for more information. • Operating voltage: 400 V, 3-phase, 50 Hz • Control voltage: 230 V, 50 Hz; 24 V AC • Motor rated current: 61 A • Heating rated current: 58 A • Total rated current: 119 A • Total connected load: 78 kW • Calibration (year): 2027 • selection unit: yes • single platen: yes Itodpfsx D Rndex Addjb • beam spacing: 470 x 470

Condition: used, Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Table comes from an injection molding machine -Make: Arburg -Type: Allrounder 320-210-750 KN -Dimensions table: Ø 320 mm -Bore center: Ø mm Itodpfjchdwtox Addsb -Dimensions: 320/320/H163 mm -Weight: 20 kg

Condition: used, Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Table comes from an injection molding machine -Make: Arburg -Type: Allrounder 320-210-750 KN -Dimensions table: 490 x 490 mm Iedpfx Aschdwroddjtb -Bore center: Ø 125 mm -Thread holes: M12 -Dimensions: 490/490/H400 mm -Weight: 236 kg

Condition: used, Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Table: comes from an injection molding machine -Make: Arburg -Type: -Dimensions table: 735 x 665 mm -Bore center: Ø 125 mm -Thread holes: M12 Itedpfxecn U Tls Addob -Dimensions: 735/665/H185 mm -Weight: 230 kg

Year of construction: 2020, condition: ready for operation (used), overall weight: 28,400 kg, This Arburg Allrounder 920H 5000-4600 was manufactured in 2020. A robust plastic processing machine featuring a clamping force of 5000 kN and an injection unit of 4600. It has a significant opening stroke of 900 mm and mold platens size of 1280 x 1280 mm. Consider the opportunity to buy this Arburg Allrounder 920H 5000-4600 plastic processing machine. Contact us for more information about this machine. Additional equipment • The robot + auto line are not included. These PIOVAN accessories are included: Piovan Hot Air Dryer G35 / Piovan Suction Unit PF30 / 3x Piovan Temp Unit THW118-F (+1x brand new unused temperature unit) Machine Benefits Technical Machine Benefits • Pump hours in operation: 1769 hours, hours in automatic cycle: 695 hours • Clamping force: 5000 kn / injection unit: 4600 • Opening stroke: 900 mm / distance between bars: 920 x 920 mm / mould height min-max: 400-1050 mm • Size of mold platens: 1280 x 1280 mm / ejector stroke: 250 mm / ejector force: 86 kn Itodpjx U Tqrofx Addjb Extra Information The machine has been used very little

Year of construction: 2004, condition: ready for operation (used), This Arburg 720 S 3200 -1300 was manufactured in 2004. A hydraulic injection moulding machine featuring an operating voltage of 400 V, control voltage of 24 V, and a total connected load of approximately 39.0 kW. Consider the opportunity to buy this Arburg 720 S 3200 -1300 hydraulic injection moulding machine. Contact us for more information. Isdpfjx U D A Esx Addstb

Condition: excellent (used), Year of construction: 2013, operating hours: 22,420 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 20 mm, displacement volume: 31 cm³, ejector force: 25,000 N, ejector stroke: 175 mm, total length: 4,200 mm, total width: 2,100 mm, overall weight: 4,300 kg, type of input current: three-phase, input voltage: 400 V, turntable diameter: 1,200 mm, Equipment: documentation/manual, During the inspection, it was determined that the cylinder no longer met our quality standards. This means that you have the choice between a 25, 30, or 35 mm unit. This will be purchased individually for you and is included into our offered machine price. warehouse no.: 503459 manufacturer: ARBURG type: Allrounder 1200 T 1000-170 controller: Selogica year of construction: 2013 operation hours: 22420 h technical data clamping unit Ijdsx Rx Eyopfx Addstb clamping force: 1000 kN min. mould height: 400 mm max. open daylight: 700 mm opening stroke: 300 mm round table diameter: 1200 mm equipment included 3x control for hotrunner screen text german CEE-socket 16A complact flash drive rotary table freely programmable inputs (2) and outputs (2) machine with material hopper machine incl. water flow regulator Hydraulically actuated needle shut-off-nozzle interface EUROMAP 67 Servomotor pump drive Energy-saving drive wear-resistant injection unit measures of machine l x w x h: 4.2m x 2.1m x 0m total weight: 4300KG

Condition: used, Year of construction: 2006, operating hours: 64,000 h, functionality: fully functional, machine/vehicle number: 200084, clamping force: 2,200 kN, screw diameter: 55 mm, clearance between the columns: 570 mm, displacement volume: 474 cm³, injection weight: 434 g, mold height (min.): 400 mm, opening stroke: 1,050 mm, overall weight: 8,500 kg, heating capacity: 14.9 kW (20.26 HP), pump power: 45,100 W, power: 60 kW (81.58 HP), input voltage: 400 V, Equipment: documentation/manual, CS series - LCD color screen - Selogica control system - Technology level 2 servo-driven with 2 variable displacement pumps Isdjx Td Apjpfx Addjtb - High wear-resistant plasticizing unit - Electric and hydraulic control of NVD in the mold for the 1st injection unit - Minimum installation height extended to 400 mm - Connection for air blow-off unit 1 - Core pull 1 - Core pull 2 - Injection pressure increased by 10% - HHG interface according to EUROMAP 67, 50-pin - Extended robot interface (EUROMAP 12 and 67) - Temperature control unit interface - Serial printer interface V24 - PC keyboard interface - Post-pressure switching channel 1 on the moving mold platen - Interface for color separation units - 6 manually adjustable free cooling circuits - Arburg equipment package 1,2,3,5,6,7 - Injection control - Ejector plate locking connection - Centering diameter 175 mm through the moving clamping plate Completely overhauled by Makutec in 2020. In operation until CW2/2026.

Condition: good (used), Control, circuit boards, spare parts for Arburg, injection molding machines Itodpfx Adsb A Suisdsb -Type: ARB 389 D KPL -Weight: 0.5 kg

Condition: excellent (used), Year of construction: 2010, operating hours: 78,394 h, functionality: fully functional, machine/vehicle number: 213142, clamping force: 400 kN, screw diameter: 25 mm, Here we offer, as a specialist dealer in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-kept injection moulding machines from the current year 2010 onwards. We have been wholesalers of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2010 Operating hours: 78,394 h Screw and barrel replaced Machine number: 213142 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Separator valve - German language - Single owner - machine sourced from Germany Regular maintenance by the manufacturer and previous owner Clamping unit: Clamping force: 400 kN / 40 tons Tie bar spacing: 270 x 270 mm Mounting plates: 446 x 446 mm Opening stroke: 350 mm Minimum mould height: 200 mm Maximum daylight between platens: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Injection unit: Screw diameter: 18 mm Itsdpfx Adjx Rvcvjdsb Injection volume: 23 ccm Shot weight: 21 g Injection pressure: 2500 bar Electrical: Pump: 11 kW Heater: 4 zones, 4 kW Installed power: 15 kW Main fuse: 50A Weight: 2,150 kg Warranty: Warranty up to initial commissioning Loading/Shipping: Free loaded onto buyer's truck or free delivery by arrangement with freight costs reimbursed. Available ex stock Hannover, Germany.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 203129, clamping force: 400 kN, screw diameter: 25 mm, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine: We also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2007 Operating hours: 89,470 h (screw and barrel replaced) Machine number: 203129 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) Iedpfx Aex Rvcieddstb - Separator chute - German language - Single ownership – origin Germany Regular maintenance carried out by the manufacturer and previous owner Clamping unit: - Clamping force: 400 kN / 40 t - Tie bar spacing: 270 x 270 mm - Platen size: 446 x 446 mm - Opening stroke: 350 mm - Minimum mould height: 200 mm - Maximum daylight between platens: 550 mm - Ejector stroke: 125 mm - Ejector force: max. 30 kN Injection unit: - Screw diameter: 18 mm - Injection volume: 23 cm³ - Shot weight: 21 g - Injection pressure: 2,500 bar Electrical: - Pump: 11 kW - Heaters: 4 zones, 4 kW - Installed power: 15 kW - Main fuse: 50A Weight: 2,150 kg Guarantee: Warranty until initial commissioning Loading/Shipping: Free loaded onto buyer’s truck or delivered to site against transport cost reimbursement Available ex stock Hanover, Germany Further information about our machines and company: - We only sell machines bought for our own stock from ongoing production, directly from our warehouse in Hanover - All machines offered are checked and tested before removal - We do NOT sell insolvency assets – we are NOT intermediaries dealing in third-party property - All machines offered come from successful companies where regular maintenance is a given - All listed machines can be inspected at our warehouse

Condition: excellent (used), Year of construction: 2019, operating hours: 14,600 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ARBURG Typ: 570S2200-400/170 Baujahr: 2019 Schließkraft: 220 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Schnecken DN 1: 30 mm Max. Hubvolumen: 106 cm³ Spritzteilgewicht: 97 g/PS Schnecken DN 2: 25 mm Isdpfxsx S I Ime Addetb Hubvolumen: 49 cm³ Spritzteilgewicht: 45 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit 6 - ACHS Roboter, Hersteller: MOTOMAN Baujahr: 2018 Förderband

Condition: good (used), Year of construction: 2007, functionality: fully functional, clamping force: 800 kN, For sale is an injection molding machine from the manufacturer Arburg, model 370 C 800-100. Unfortunately, the injection unit is no longer available. Overall, the machine is in good condition. Technical Data: Year of manufacture: 2007 Clamping force: 800 kN Tie bar spacing: 370 x 370 mm Max. daylight: 750 mm Mold installation height: 250 mm Injection unit: 100 (not included) Itodpfx Adex U Dnusdjb Transport and loading can be organized Europe-wide upon request for an additional charge. Prices include VAT. Inspection by appointment possible. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION AND METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production line? Or would you like to sell your own? For more information or contact options, please visit our website.

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Iedpfxoyab I Uj Addotb