Used Arburg for sale (312)

Condition: used, Year of construction: 2019, Serial no. 250550, Arburg Selogica direct control, screw diameter 18 mm, tie bar spacing 370 x 370 mm, clamping force 60 kN Chedpfx Aasxf A Aveced

Condition: excellent (used), Year of construction: 2016, Clamping force: 80 t Screw diameter: 30 mm Type: Vertical Drive: Hydraulic Cedpswwxfajfx Aacohd Servo rotary table.

Condition: good (used), Year of construction: 2005, Ref. no.: 18591 Hersteller: ARBURG Type: 520 A 1600-400 Electric machines Year of construction: 2005 Chjdpfx Aaoxf T I Njcsd Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m

Condition: used, Year of construction: 2006, operating hours: 73,000 h, functionality: not functional, clamping force: 500 kN, screw diameter: 30 mm, injection weight: 77 g, Arburg 320C 500-170 Year of manufacture: 09/2006 Injection unit: Csdpfxjxt Uyvj Aacjhd Screw diameter: 30 mm Shot weight: 77 g Injection pressure: 2000 bar Dosage volume: 85 ccm Clamping unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Platen dimensions: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 1 Injection unit hardened - Bimetal Dimensions: Weight: 2400 kg Length/width/height: 3.41x1.47x1.99 m Drive: Pump/Motor: 11 kW Heating capacity: 9.4 kW Total power: 20.4 kW The machine is supplied without a nozzle and requires repair of a card.

Condition: used, Year of construction: 2007, Injection moulding machine Arburg 570C 2000 150/60 2 K, year of manufacture: 2007 Control: Selogica Clamping force [kN]: 2000 Screw diameter: 25 / 12+15 Core pull: 1 Integrated hot runner zones: 15 Chsdsw D R S Eepfx Aacjd Total power [kW]: 44.3 Opening stroke [mm]: 650 Selector unit: no Max. mould height [mm]: Min. mould height [mm]: 300 Specific injection pressure [bar]: 2500 Max. shot weight [g for PS]: 49 Tie bar spacing [mm x mm]: 570/570

Year of construction: 1995, condition: ready for operation (used), Clamping force: 500kN, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, max. platen opening: 550mm, clamping platen dimensions X/Y: 500mm/500mm, machine dimensions X/Y/Z: approx. 3700mm/1400mm/1900mm, weight: approx. 1750kg. An on-site inspection is possible. Csdsxltvmopfx Aacohd

Condition: used, Arburg plasticising unit IU mm- thermoplastic cylinder complete - BMA-Nitr. 230 V - removed from Arburg 420 C Chedpfxorr Eghe Aacjd - removed from running machine - fully functionalmanufacturer: Arburg type: IU0 spare part no.: 141.228 Dition: gebraucht

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 194573, clamping force: 1,000 kN, Here we offer a maintained injection molding machine. Arburg 2-color injection molding machine horizontal vertical Aggregate Masch.Nr : will be informed on request Arburg 420C 1000-150/150 year of construction: 2004 Control : Selogica Extras: Cjdpjhyumgefx Aacehd 2X core pull (conc. travel, holding pressure adjustable) Intermediate stop for hydraulic rotary control CF card drive Interface master computer Interface dyeing unit Interface conveyor belt Machine prepared for Multilift Selecting unit w. connection installation height extended to 350 mm high wear resistant screws connection blow-out unit 2-color /horiz.vert. unit incl. diskettes/CF cards - complete documents/manuals closing force: 100 tons/1000 kN tie bar distance 420 x 420 mm WKZG plates: 570 x 570 mm opening stroke 500 mm max. dist. plates 850 mm height of tooling: 350 mm 1.injection unit (150 er) screw: 30 mm (highly wear resistant) Injection weight: 65 gr. Injection volume: 78 ccm Injection pressure: 2210 bar 2.injection unit (150 er) Screw: 25 mm (highly wear resistant) Injection weight: 45 gr. Injection volume: 54 ccm Injection pressure: 2500 bar Weight/Dimension Dimension: 4,63 x 1,3 x 3,9 mtr. (LXBXH) Weight: 4.000 kg connected load: 125 A pre-fuse free delivery to buyer's yard - buyer unloads at his own risk from truck bed. the machine is offered functionally tested the machine is in our exclusive property.

Condition: good (used), Year of construction: 2001, Ref. no.: 18404 Hersteller: ARBURG Type: 420C-1300-350 Year of construction: 2001 Clamping unit Clamping force: 130 ton Opening stroke: 500 mm Distance between tie bars: 420 x420 mm Mould height min.: 250 mm Chedpfswm I A Tjx Aacod Opening width: 750 mm Platen size (h x v): 605 x 605 mm Injection unit Screw diameter: 45 mm Injection volume: 230 cm³ Shot weight: 210 g Injection pressure: 1670 bar Measurements and weight Dimensions: 4,68 x 1,3 x 2,2 m Machine weight: 4080 kg Additional information & extras Core pull: 1 pcs

Condition: excellent (used), Year of construction: 2011, travel distance X-axis: 900 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 2,800 mm, overall weight: 450 kg, Equipment: documentation/manual, Number of axis: 3 Reach: 2800 mm Payload: 15 kg X-900 mm Y-1400 mm Z-2800 mm C- 90 Cedpfx Aexn Rg Ujacjhd

Condition: used, Year of construction: 2010, Injection molding machine Arburg Allrounder 470 H 1000-170, year 2010 Clamping force: 1000 kN Screw diameter: 30 mm Screw length: 930 mm Shot weight: 77 g With Arburg robot Chedpew E Ev Ujfx Aacsd The machine can be inspected under power at any time!

Condition: used, Year of construction: 2013, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 405 cm³, injection pressure: 2,000 bar, injection weight: 397 g, mold height (min.): 300 mm, ejector stroke: 120 mm, opening stroke: 450 mm, type of input current: three-phase, pressing force: 200 t, For sale: Arburg 200T machine in very good condition. Chodpfx Aexqc Atjacod

Condition: used, Year of construction: 1998, clamping force: 50 kN, displacement volume: 490 cm³, injection pressure: 2,000 bar, overall weight: 2,300 kg, load hours: 60,000 h, screw conveyor diameter: 25 mm, terms of delivery: FCA Pegnitz Chjdsxa Htzopfx Aacod delivery time: on request terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2003, operating hours: 20,092 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 20092 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 Chodpfjgrzh Ejx Aacod 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: excellent (used), Year of construction: 2006, Injection Moulding Machine Arburg 320 C 400-170 Year of manufacture: 2006 Clamping force: 40 t Screw diameter: 30 mm Distance between tie bars: 320 × 320 mm Maximum injection volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Maximum screw speed: 400 rpm Cjdpfjxqh Ihsx Aacshd Nozzle stroke: 250 mm Nozzle contact force: 40.6 kN Heating power: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2,400 kg

Condition: ready for operation (used), Year of construction: 2004, clamping force: 500 kN, screw diameter: 25 mm, opening stroke: 350 mm, For sale is an injection molding machine of the company Arburg and the type 320 S 500-150 The company from which this machine originates attaches great importance to maintenance. The order of the machine was terminated and no follow-up order was set, so this machine was removed from production. The pump has a slight lack of pressure but is functional Technical data: Year of construction: 2004 Clamping force: 500 kN Screw diameter: 25 mm approach force: 35 kN Chodokwcydopfx Aaced Opening force 120 kN opening stroke 350 mm clamping platen distance 575 mm Mold installation height 225 mm Prices plus value added tax Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: used, Year of construction: 2001, Vertical injection moulding machine Arburg 900T 800-150, year 2001 Year of manufacture: 2001 Control: Selogica Clamping force [kN]: 800 Screw diameter: 25 Core pull: No Integrated hotrunner zones: 6 Chedpfx Aaew D R T Nscod Total power [kW]: 26 Opening stroke [mm]: 300 Selecting unit: - Max. mould height [mm]: - Min. mould height [mm]: 250 Specific injection pressure [bar]: 2500 Max. shot weight [g for PS]: 45 Free space between tie bars [mm x mm]

Condition: excellent (used), Year of construction: 2007, operating hours: 79,941 h, clamping force: 1,600 kN, screw diameter: 40 mm, clearance between the columns: 570 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, injection weight: 184 g, mold height (min.): 250 mm, Arburg 570A-1600-400 (244) hybrid injection molding machine with sorting flap Csdpfjxdlwyjx Aacshd Number: 244 Availability: in stock Year of production: 2007 Producer: Arburg Screw diameter [mm]: 40 Injection weight [g]: 184 Injection pressure [bar]: 2000 Closing force [kN]: 1600 Column spacing [mm]: 570 x 570 Plate size [mm]: 790 x 795 Min. mold height [mm]: 250-550 Control type: Selogica Tongue: English, German Installed power [kW]: 21.2 Working hours [h]: 79941 Weight [kg]: 9000 Dimensions [mm]: 5100 x 2000 Feed hopper: NO Robot socket: Yes Air valve: 6x

Condition: used, Arburg double axial pump AKP28 + AKP10- removed from Arburg Allrounder 275 V 25 removed from running machine Chsdpfou Tv A Rsx Aacsd - fully functionalmanufacturer: Arburg type: AKP28 + AKP10 spare part no.: 250.957 manufacturer no.: R9 R9Type code: A10VS0 28 DFR1/31R-PPA12KB2-S1894, A10VS0 10 DFR1/52R-VSA14N00-S2679The number before the first slash describes the device series. For this reason, this digit of the type code on your old spare part may differ. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 199107, Here we offer a maintained injection molding machine. Manufacturer: Arburg Type: 720S 3200-2100 Control unit: Selogica Year of manufacture: 2005 Special feature/Condition Pump was changed new hydraulic motor in 2019 injection unit sealed in 2019 constant maintenance by the manufacturer and previous owner Extras Chsdpfxelc R Rxj Aacjd 2 x core pull robot interface machine data sheet is available on request - complete documentation and software available - German language - from first owner - origin Germany clamping unit clamping force: 3200 kN /320 to. tie bar distance: 720 x 720 mm platen size h: 1040 mm x 1040 mm Installation height min.: 300 mm Installation height max.: 700 mm platen distance max.: 1400 mm opening stroke: 700 mm ejector stroke: 250 mm Ejector force: 100 kN centering moving platen D: 165 mm centering fixed platen D: 165 mm mold weight: 3600 kg Injection unit screw diameter: 70 mm injection weight in polysterol: 984 g/PS available immediately from our warehouse in Hanover/German or free domicile against freight reimbursement the machine is offered functionally tested the machine is in our sole ownership the requested machine is available immediately in our warehouse Hannover and is offered functionally tested and can be inspected under power.

Condition: excellent (used), Year of construction: 2012, Arburg 370 S 700-290 U (2012) Clamping force : 70 tons Screw diameter: 25 mm Injection volume: 59 cm³ Shot weight (PS): 54 g Injection pressure: 2000 bar Screw L/D ratio: 20:1 Number of heating zones: 12 Nozzle retraction stroke: 240 mm Tie bar spacing (H × V): 370 × 370 mm Platen dimensions (H × V): 510 × 510 mm Minimum mold height: 200 mm Maximum daylight: 600 mm Opening stroke: 400 mm Chjdpfx Aewp I Dieacjd Ejector stroke: 125 mm Ejector force: 30 kN Working hours : 46340 Weight: 3,500kg  Length × Width × Height: 3.92 m × 1.45 m × 2.02 m 

Year of construction: 2013, condition: ready for operation (used), Clamping force: 3200kN, screw diameter: 45mm, max. installation height: 800mm, tie bar distance: 720mm, core pulls: 1, control: Selogica, operating hours: 72520h, cycles: approx. 28 million. Documentation available. An on-site inspection is possible. Csdpfxoxfvhlo Aacohd

Condition: excellent (used), Year of construction: 2004, Arburg 270 S 250-60 (2004) Clamping Force: 25 t Tie Bar Spacing: 270 mm × 270 mm Platen Dimensions: 400 mm × 400 mm Max. Mold Opening Stroke: 275 mm Min. Mold Height: 198 mm Max. Daylight: 279 mm Ejector Stroke: 95 mm Mold Opening Force (Max.): 14 kN Machine Dimensions (W × D): 1250 mm × 3800 mm Machine Weight: Approximately 1900 kg Screw Diameter: 22 mm Stroke Volume: 39 cm³ Injection Pressure: 1810 bar Injection Flow (2 Pumps): Up to 8.1 cm³/s Material Throughput (PS): Up to 22.0 kg/h Cjdjxl Tp Topfx Aacehd Year of Manufacture: 2004 Type: Hydraulic Injection Molding Machine

Condition: good (used), Year of construction: 1998, Arburg 270S 500-150 (1998) Clamping force: 50 t Screw diameter: 25 mm Distance between tie bars V: 270 mm Chsdpfxoxl Hpgo Aacjd Distance between tie bars H: 270 mm Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2002, Arburg 320S 350-150 (2002) Clamping force: 35 ton Plate size: 455x455 mm Tie bar distance: 320x320 mm Chjdpfxewmqx Rs Aacsd Maximum daylight : 575 mm Screw dia: 30mm (up to 30%glass resistant)