Used Arunda Template for sale (132)

Condition: excellent (used), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Designation: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or contact measurement of all features. The CALYPSO software simultaneously displays the actual state, nominal profile, and deviations, making measurement results easy to identify and interpret. General Data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Electrical Data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Travel Speeds: Creep speed, SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement: Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Ambient Conditions: The following conditions must be met for proper operation of the measuring machine. Operating ambient temperature: +17°C to +35°C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement: 20°C ±1 K Altitude above sea level: 100–125 V: max. 3000 m 230–240 V: max. 2000 m Probe System: Probe System: CFS Probe Types Data: Bwjdpfjw Titlsx Aa Nei Probe Type: CFS 2 mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface angle to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface angle to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface angle to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and resolution Table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular speed max: 50°/s Rotational speed: 8.3 min⁻¹ Scope of Delivery: In the standard version, the O-INSPECT coordinate measuring machine is supplied with the following components: - Coordinate measuring machine (CMM) - Controller (integrated) - Control panel - PC with peripherals - Software - CALYPSO 5.2 - Documentation - Probe system - Reference stylus - Calibration artifact - Calibration template Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Specifications subject to change and errors excepted!) Please inquire about transport options prior to purchase. If you have further questions, we are happy to assist you by phone.

Condition: good (used), Copy Milling / Engraving Machine Stock number: 3065 Manufacturer: WMW Union Gera Machine number: 11020 Type / Model: FG 250x500-200 Travel distances x-y-z: 280 - 200 - 315 mm Bodpfeygcnpex Aa Nswi Template table / work table: 380 x 380 // 500 x 250 mm Speed range: 2,500 to 20,000 rpm Accessories / Equipment: Font set Power requirement: 0.25 kW Condition: Good Weight: 0.37 t Footprint: 600 x 500 mm Dimensions: 1,100 x 1,000 x 1,300 mm

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, STEEL CUTTING MACHINE with ONLINE-PC-STEUERUNG350 fully automatic steel cutting machine for reinforcing steel cutting in a single - or double cut according to requirement. Optimized cutting with residual lengths. The system consists of an automatic Vorlegemagazin with 12 seats, a hacksaw and a belt conveyor to the removal of cut-to-length steel profiles. Rest lengths to promote after length in a rest length basket, transport or waste basket. Bwjdscmqkmspfx Aa Noi The steel profiles are processed in the process, while the profile bar is precisely positioned by a transport gripper with linear motor and rotary encoders. The saw cut is made from the top, Microdosier-cooling-lubrication system ensures optimum cooling of the blade. The profile is, profile cross section regardless, pneumatically. Free-standing system with PC control or in combination with an automatic cutting machine, plastic-BAZ or SBZ. In a combination of stroke with the automatic cutting machine, BAZ or SBZ is synchronized. Profile lists for the store in the template magazine displays the employee on the TFT screen. The finished steel profiles are taken from the belt conveyor, acknowledged and filed in car, or manually pushed to the Stahlein-schubstation in the PVC profiles. New facility 10 weeks delivery time

Condition: new, ALTENDORF F 35 Type 1 - 1000 Panel Saw Robust, powerful, high cutting height – ideal for solid wood! - New machine - available immediately - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Large protective hood Double roller carriage 3,200 mm Scoring unit preparation Rip fence, cutting width 1,000 mm Angle and mitre fence 3,450 mm, without longitudinal compensation Table extension/widening: powder-coated surface Saw blade tilt: 0 - 46° Carriage length: 3,200 mm Cutting length: 3,100 mm Bedpjxtbtpofx Aa Newi Cutting width: 1,000 mm Cutting height: 154 mm Max. saw blade Ø: 450 mm Screen size: 15 inches Working table height: 910 mm Extraction port Ø: 80 + 120 mm Including options: M45102 Rip fence 1000 mm Digit_X M64300 Front support roller M99008 Template holder

Condition: new, ALTENDORF Model F45 Pro Drive Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with promotional price and full manufacturer warranty. Pro Drive control: 3,5" color screen with separate keyboard Automatic dimensional correction on the rip fence and angle fence when tilting the saw unit Simple calibration of the axes Machine diagnostics, operating hours counter, USB interface Recall of the last dimension input (back function) 99 storable cutting programs Grooving: with automatic step-by-step positioning of the rip fence 400V / 50Hz - Europe , Scale: scale in mm Electromotive height and tilt adjustment 0 - 46° for the main saw blade with automatic correction of the cutting height when the saw unit is tilted Machine height 910 mm (basic equipment) The control panel of the F 45 is mounted at eye level. This makes it easy to control all axes, and all settings are in view. The one-handed operation of the swing-away device is easily accessible from the working position in front of the machine. Another advantage: nothing stands in your way at the smooth machine front. INCL. OPTIONS: M62003 Template holder M64080 Extended cutting height with saw blade projection of max. 204 mm. Bjdpfxjiz Aufo Aa Nowi M51101 One-sided tilting saw unit with 7.5 kW (10 HP) motor, M24030 2-axis scoring unit with electric motor-driven height and side adjustment M24037 LED lighting for the danger area of the scoring unit M41010 Table top extension 840 mm M34204 Double roller carriage, carriage length 3200 mm M44404 Angle miter fence, cutting to length up to 3500 m. M44443 CNC parallel fence, cutting width 1300 mm. M44450 Front support roller. M37003 On/off switch on the sliding table. Note used machines: - Errors in technical specifications and subject to prior sale. - Indicated prices are valid as pickup prices ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are bought as seen without any claim to warranty. The buyer is free to inspect the machines at the site. - Special agreements are only possible in written form. (We answer inquiries only under indication of your address + telephone number!)

Condition: new, Technical description:Cutting height: vertical: 0 - 2,150 mm, horizontal: 80 - 2,050 mmCutting length: 5,300 mmCutting depth: 80 mm (with clamps: 55 mm)Saw blade: diameter 303 mm, bore 30 mm, Z = 60 hollow roof toothRotation of the saw blade: 5,000 or: 4 kW (S 6)Required air pressure: 6 barMeasurement readout for horizontal saw cuts:- using a scale from 0 - 2,070 mm- using a strip cutting stop from 75 - 500 mmMeasurement readout for vertical saw cuts:- on a scale from 0 - 1,300 mmExtraction nozzle: 1 x 100 mm 1 x 120 mmEquipment features:- ADVANCE clamping system, consisting of: 2 pneumatic clamping pliers,the motorized on vertical axes on a recirculating ball screw from abovemove down. The tongs carry plates with a weight ofmax. 150 kg- Torsion-free, free-standing machine frame- Round rod guide, vertical and horizontal- Pneumatically evasive slatted frame- Finely adjustable folding stop with stop extension- Fine adjustment for horizontal saw cuts via handwheel- Strip cutting stop- Manual programming rail with 5 slot nuts- Pneumatic immersion of the saw unit- 25 material support rollers- 1 feed roller and 1 feed roller- Pneumatic workpiece clamping device between the support rollers- 3 central support elements, pneumatically folding out- Pneumatic saw head locking- Control panel with template holder- Switch unit on the saw unit: start button, stop button- Tool cabinet- Illumination scale for vertical saw cutsOrder number: ELCO0001 / S013Scope of delivery:Equipment package I, consisting of:- Digital display for the folding stop- Digital display for the saw unit with incremental function- pneumatically swiveling saw unit- Scoring system with controlled counter air nozzle, numerical displayfor setting the scoring or groove depth and activating lightOrder number: ELCO0191 / S085 Bsdpfsvwf Hlex Aa Njwi

Condition: used, used, top condition, hardly used many equipment cleaned, function checked, manufactured by Hapfo-Columbus type C-S SINUS - vacuum enineering for individual form glueing Bedpfx Asvwgfcsa Newi and form veneering - C-S SINUS are suitable for easy and safe form glueing of round furniture parts per only one basic template (without contra template) - used outstanding for form veneering from easy profiles and roundings with commercial veneers or plastic covers - can be easy and rationally extensive form parts like bar desks, bars and counters completely without template building form-glued - with C-S SINUS bars, bar desks, ceiling panels partitions, doorway arches etc. can be manufactured without templates in layer glue procedure. C-S SINUS is suitable for arches with a radius starting from 250 mm up to straight elements for vacuum-layer glue procedure without template inclusive: - 20 piece C-S SINUS arch stands solid arch stand for screwing on to workshop ground, inclusive holding device for the inserted workpiece - C-S SINUS Vacuum bag (effective surface 4000 x 600 mm) original price ca. 5.500,-- located in 97447 Gerolzhofen sale in current condition - free on truck -

Condition: repair required (used), Year of construction: 2001, CNC-controlled wood lathe Processes 3 components simultaneously No controller Control cabinet without computer, the attractiveness of the offer without control should be considered. Control system can be supplied for the customer at an additional cost Technical specification Maximum working length: 1200 mm Maximum square: 100×100 mm Bwjdpfxjf Ezgqj Aa Nei 3 components machined simultaneously Programmable template Fagor control Designed for high productivity.

Condition: new, - NEW - Concept 350 ELITE Partnership Edition - Cutting length 3200 mm - General Features: - Aluminium machine and extension tables - Saw unit tiltable up to 46° - Pressure beam, incl. LED lighting with 3 different indicator colors: WHITE: Machine in standby RED: Pressure beam lowering or emergency stop function BLUE: Saw unit in operation Bwedpfx Aaswzmvbs Nsi - Variable support table, 1,000 x 500 mm - Scoring system via main saw blade in the same direction of rotation - Automatic workpiece length detection for minimal travel distances - Mobile and height-adjustable control panel, incl.: Saw blade holder, template holder, emergency stop button, start button, selector switch for grooving / scoring / sawing, feed speed rotary switch, switch for laser (option), and USB socket Partnership Edition includes: - Motorised rip fence with 4 aluminium stops, synchronized traversing All 4 stops travel up to 1,300 mm. Table length approx. 2,000 mm. - Windows 10 display control (10" touchscreen). The graphical interface offers the following functions: Tool database, mitre cut calculation at the length stop, Cutting plans can be created and saved, programs can be stored, exported, and imported via USB. - Telescopic stop extendable to 3,400 mm, including 2 digital displays Technical Specifications: - Max. saw blade projection: 350 mm - Saw blade: 100 mm at 90° / 70 mm at 45° - Saw blade diameter: 300 – 350 mm, bore 30 mm - Saw blade speed: 4,000 rpm - Motor: 5 kW (= 7.5 HP) - Feed speed: 0 – 40 m/min - Overall length: approx. 4,250 mm - Weight: approx. 1,300 – 1,700 kg (depending on cutting length and configuration) - Required air pressure: 7 bar - Extraction ports: 1 x 100 mm, 1 x 120 mm - Order No.: FIMAL379 Including: - Motorised rip fence with 4 aluminium stops, traversing up to 2,100 mm instead of 1,300 mm. Order No.: 47/17 - Cutting line laser Order No.: 3410451 - Saw motor with 7.5 kW (10 HP) incl. automatic star-delta start Order No.: Programmable saw blade height adjustment incl. height correction when tilting the saw unit Optional accessories at extra cost: - Mitre stop +/- 50° tiltable with length compensation Order No.: 3380132 including telescopic stop and folding stop

Condition: new, ALTENDORF HAND GUARD sliding table saw Edition TwinFlex with 12" touchscreen -exhibition machine- Including: - ALTENDORF HAND GUARD sliding table saw Edition TwinFlex with 12" touchscreen Optical protection system: Two cameras collect data for hand detection from a wide area around the saw blade. As soon as hands are detected entering the area a quarter of a second, the saw unit is quickly lowered and quick stop of the saw unit within a quarter of a second. EDITION TWINFLEX - Double roller carriage 3,000 mm - Saw blade projection 150 mm - Motor power VARIO 5 kW (6.8 HP) - Tilting on both sides - DIGIT LD angle mitre fence, cutting to length up to 3,200 mm - CNC rip fence, cutting width 1,000 mm - On/off switch on the double roller carriage - Template holder Included: - Surcharge for motor power 6.5 kW (8.8 hp) ALTENDORF with VARIO, for tilting on both sides Bwodpfxju R S Elo Aa Nji Included: - Scoring unit 2-axle, 2-sided, ALTENDORF with motorized height and side adjustment Scoring blade height programmable with quick lowering and quick raising, Drive motor 0.75 kW (1 hp), 8,200 rpm. Including: - RAPIDO 180 mm ALTENDORF scoring system for tilting on both sides Includes: - LED lighting on ALTENDORF scoring unit Included: - Double roller carriage 3,400 mm, ALTENDORF Including: - CNC parallel fence, 1,300 mm, ALTENDORF Included: - Camera arm, swiveling ALTENDORF Includes: - Front support roller ALTENDORF Width 300 mm Includes: - ALTENDORF air cushion table Includes: - Table top extension 840 mm ALTENDORF with air cushion - new exhibition machine -

Condition: used, Technical details: spindle passage: 60 mm turning length: 45 mm turning diameter: max. 56 mm drill depth: max. 70 mm revolution per minute: 48 - 1500 (spindle) U/min threading: Drehzahl: 24 - 750 U/min tool turret - number of stations: 8 total power requirement: 5,5 kW weight of the machine ca.: 2,4 t space requirement of the machine approx.: L:2,1x1,0x1,8 m Cam-controlled automatic lathe according to template. Bodpfx Aju Iwyisa Nowi Workpiece is clamped via clamping cartridge. Turret head: disk turret Hahn&Tessky Esslingen, tool path 80mm, adjustment 36mm, distance collet/turret head min./max.: 72/188mm 2 pieces turning support, working stroke 45mm 2 piece cutting off support, working path approx. 40mm Cooling water system Machine is not connected. Sale at a low selling price. *

Condition: used, Technical details: base plate: 210x110 mm weight of the machine approx.: 60 kg space requirements of the machine approx.: 0,7x0,52x0,5 m copy device for grinding machines for grinding wheel forming ( profile device) details: - adjustment travel upper table longitudinal=60mm (manual) - transverse travel = 20mm - under frame=approx. 60mm ( lockable) Bwjdpou Nuq Iofx Aa Nji - template table size 310x150mm perfect used condition *

Condition: used, Year of construction: 2005, No. 3256 CNC machine for pallet production Sysmathick RPA9 + stacker Used, year of construction 2005, machine already dismantled Machine for assembling wooden parts with top and bottom nailing The RPA9 is a machine with circulation chains for the production of pallets in standard dimensions according to four templates (maximum 1600 x 1400 mm LW) Operation via a touchscreen Format changeover within a few minutes Two programming methods: - digital programming via PC (input of coordinates) - Manual programming via touch screen Storage of tens of thousands of products Automatic control of the distance between the heads (minimum 290 mm) Positioning accuracy +/- 1 mm High adjustment speed (1 m/s) Bridge with nine nailers (top 3x N58 & 3x N400, bottom 3x N80) High nailing frequency (one row of three nails per second) Nailing of multi-level pallets thanks to the heads Equipped with pneumatic cylinders Pneumatic pressing of the boards during assembly Minimum pallet dimensions 600 x 300 mm LW Maximum pallet dimensions 1600 x 1400 mm LW Maximum template dimensions 1700 x 1600 mm LW Maximum nailing capacity 1600 x 1400 mm LW Maximum pallet height 190 mm Minimum pallet height 110 mm Machine capacity 60 - 200 pallets/hour Bwsdpfjx Dddxex Aa Noi Sale on behalf of customer, ex location near 51371 Leverkusen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: new, Year of construction: 2026, Heavy duty manual guillotine shear for trade and industry. With the manual guillotine shear GLT you can make the perfect cut with every job. the extending table makes it easier to guide large-sized metal sheets on the table Support table with graduation robust and compact steel construction high quality, durable steel knife extremely stable and heavy construction made of cast iron ground and hardened guillotine shears Back gauge system with Scala CE mark Declaration of conformity stable and robust construction for steel plates up to 1.2mm Working length 2050mm open design suitable for endless cuts large cast work table Lower storage compartment for storing sheet metal pieces in the price Dimensions: Length: 2500mm Width: 750mm Height: 1150mm Weight: approx. 500 kg Passage: 8cm Price: 4650 euros marking template free! Delivery date: every week Contact what's app We are looking forward to your contact! Bwodpfx Aascl D Hlo Noi We issue the invoices with 0% (intra-community delivery)

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels Bjdpfx Asq H Sqdja Njwi externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK BH40M Hinge Drilling Machine – Precise Machining of Furniture Fittings The CORMAK BH40M hinge drilling machine is a compact, efficient, and easy-to-use horizontal wood drilling machine designed for precise drilling of holes for furniture hinges. Ideal for carpentry and furniture manufacturing, the machine offers consistent drilling and stable tool guidance. Thanks to its intuitive design and robust components, the BH40M ensures high-quality work while maintaining ease of operation. Main Advantages of the Machine Without a Compressed Air System: Precise drilling for furniture hinges – an adjustable depth stop allows for drilling with full parameter control, minimizing the risk of material damage. Bsdew Hbwqepfx Aa Newi Compact and stable construction – a rigid base with a large work table (790 x 390 mm) ensures comfort and safety. Compressed air-free – the lack of a pneumatic system translates into reliability and low operating and maintenance costs. A 0.75 kW motor – the head drive provides sufficient torque for working with Blum hinges and other hardware systems. Three working spindles – allow for simultaneous drilling of holes for the main hinge and side guides. Design and Technology The CORMAK BH40M model is designed with ease of use and durability in mind. A mechanical working head travel of 110 mm and manual control ensure full control over the work cycle. The 10 mm tool shank diameter allows for the use of standard hardware drills. Compact overall dimensions (800 x 630 x 780 mm) and a weight of 45 kg make this furniture hardware drill ideal for field assembly work. Precision and Efficiency Thanks to the optimally selected spindle speed (2800 rpm) and the ability to manually adjust settings, the operator can quickly and accurately drill holes for any standard hinge type. Adjustable drilling depth (up to 20 mm) allows for easy adaptation to various front thicknesses and hinge types. Stable workpiece clamping and parameter control minimize assembly errors and increase the efficiency of the entire process. The CORMAK BH40M hinge drilling machine is suitable for: kitchen, bathroom, and office furniture production, carpentry workshops and maintenance departments, service companies specializing in hardware installation, woodworking schools and training centers. Standard Equipment Three-spindle drilling head for hinges, mechanical guide travel (110 mm), adjustable depth stop, work table 790 x 390 mm, 0.75 kW (230 V) motor, manual control and workpiece clamping. Optional Equipment drill bits for Blum hinges and other systems, positioning templates for various types of fittings, sets of mounting plates and side stops. Technical Data Table Dimensions 790 x 390 mm Guide Travel 110 mm Space Between Spindle and Table 155 mm Tool Shank Diameter 10 mm Number of Spindles 3 Max. Drilling depth: 20 mm Speed: 2800 rpm Workpiece clamping: manual Manual control Motor: 0.75 kW Power supply: 230 V Overall dimensions: 800 x 630 x 780 mm Weight: 45 kg

Condition: excellent (used), Livio Macchia 08 LPT lathe part grinding machine Two grinding units Oscillating polishing brushes Template-guided operation Bsdpfxsydn Amo Aa Njwi

Condition: good (used), Code: 0242 Brand: MVM - ITALY Model: T 1500 - CE Standard Professional wood turning lathe with copying device for wood, plaster, composite materials and various - CE Standard Technical data: Single-phase motor 220 Volt - Kw 2,5 Copying device: the copying device is a unit mounted on the rear bench. It can reproduce weather with wooden samples or with metallic templates thanks to its modern view. It is a practical and manageable tool, it permits large time saving, in batch production or mass production, too. The feed is given by a confortable wheel rotation, the wheel is mounted on the machine fore side Distance between centres mm 1500 Bwodpfx Aasxykwke Noi Height of centre mm 220 Tool support Spindle revolutions 4 speeds Spindle cone n° 2 Counter centre n° 3 Overall dimensions mm 2350 x 650 x 1200 h Weight kg 325

Condition: excellent (used), functionality: fully functional, End tenoning machine Comec FT-CD-CA-680 Number of milling units per side: 1 Automatic material loading from feeder Bjdpfx Asychiksa Njwi Template copying operation

Condition: good (used), Year of construction: 2009, Brief Description of Basic Equipment ·      Console table ·      Automatic console positioning ·      Three-stage clamping element ·      Laser positioning aid for vacuum clamps ·      Vacuum clamps Main spindle 15 kW C-axis with aggregate interface Interface for Flex5 aggregate 30-position chain tool changer Tool holder HSKF 63 Drilling head with 13 spindles WoodWop package for CAD/CAM PC integration Rack and pinion drive for X and Y axis Ball screw for Z axis Z-axis travel: 600 mm Travel speeds: Vector speed: 113 m/min X and Y axis: 80 m/min Z axis: 30 m/min Free-standing electric cabinet. Homag control system Homag Homatic CNC System NC 83 with PLC control Remote diagnostics / telephone modem Technical Data Max. workpiece length: 4000 mm (all aggregates individually), max. 1375 mm with pendulum operation Tool diameter: 25 mm Single: 4175 mm / pendulum: 1550 mm Workpiece width (all aggregates): front 1150 mm, rear 1400 mm Workpiece thickness: 40 mm Milling operation, tool diameter 25 mm: front 1220* mm, rear 1550 mm *Workpiece thickness 40 mm Console table K Console length: 1340 mm Side stop rails Vacuum clamps Max. workpiece thickness: 300 mm with standard clamp max. 120 mm with mechanical clamping elements / clamping templates (customer-supplied) up to 80 mm with standard clamp Working height: 960 mm (underside of workpiece) PM basic equipment Automatic console positioning Three-stage clamping element Main spindle 15 kW (12 kW in S1 mode) Frequency inverter Spindle with hybrid bearings C-axis with aggregate interface Interface for Flex5 aggregate Vertical high-speed spindles Pneumatic lowerable loading stroke Two-stage clamping element for PM console Clamping device for post edge Three-stage clamping element for PM console Saw unit D= 280 mm Drilling/milling aggregate, 4-spindle for tool changer Lock case aggregate 2 Bwedpfx Asyb Ndgja Nsi Immediately available All information supplied without liability. Further technical data upon request. Individual tools may also be purchased at additional cost. The tools shown are NOT included in the base price!

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor - With saw blades - With intermediate gear Clearance width: 650 mm Clearance height: 90–620 mm Stroke: 500 mm Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Annual cut approximately 3,000 solid cubic meters. Bwodpfxoyhduyo Aa Nsi Very good condition – immediately available – fully functional Location: Austria, near Graz

Condition: like new (used), Year of construction: 2010, Weinig Rondamat 960 Powerlock (Automatic straight knife grinder and profile grinder) Specification: Weinig Rondamat 960 Powerlock / HSK profile grinder. High-precision knife grinder for grinding straight knives and profiling using a template. Grinding straight knives in a knife block. Hand-held grinder for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazon 10 mm Grinding wheel bore: 60 mm Turning circle min./max.: 100 mm / 300 mm Tool width max.: 360 mm Grinding wheel drive: 1.1 kW Spindle speed: 1700 / 2000 / 2400 / 3000 rpm Relief angle: Radial: (back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 liters Table travel 0 - 360 mm Electrical connection approx. 2 kW Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz Complete documentation. Bedpfxexlk Nqe Aa Njwi

Condition: not inspected (used), functionality: unexamined, Lot of machinery for making cable drums Some of the machines in the batch: Small Coil Line Claramunt Small Coil Nailer Bedpfothqqbox Aa Newi Cutter Template Table Large Nailer Rollers Large Fere Nailer Large Edge Trimmer Large Cable Outlet Machine

Condition: excellent (used), functionality: fully functional, Triade TI-30 automatic lathe Turning length 300 mm Bsdex Uqtdepfx Aa Njwi Copying tools by template 1 profile tool Automatic material loading

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 4-axis CNC machining center with console table and edge banding unit Manufacturer: IMA Model: BIMA 400 V Year of manufacture: 2009 8 manually adjustable supports in X-axis, Bwodpexrltksfx Aa Nei 3 vacuum pods per console, Vacuum pump 100 m³/h -2* Vacuum connection for templates LED display for pod position indication Working area X: 200 – 6150 mm Working area Y: 0 – 1600 mm (milling/drilling), with edge banding 1525 mm Working area Z: 12 – 125 mm (clearance 150 mm) 14 vertical drilling spindles Horizontal drilling and grooving saw unit, swiveling 90° Milling spindle 11 kW / 7.5 kW up to 24,000 rpm With C-axis, 360° interpolation, liquid circulation cooling – 18-position tool changer, traveling with y-support Edge banding unit VT 100, 4-sided/all-round – rotation range 740 degrees With dual roller magazine, automatic granulate feeding Adapter units: – Saw, fixed at 90° – 5-axis saw/drill/milling unit Vario NC – Horizontal cutter (corner notching) – Flush trimming and profile scraping blade with extension for flat scraper ICOS open control system with 17" TFT ImaWop 6.0 incl. MDE and production list software Chip conveyor Side safety fencing and front safety mats; Rear: requires wall placement or separate safeguarding