Used Automatic Coating Machine for sale (76,805)

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic band sawing machine for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. The belt drive is equipped with a two-speed motor and the special gearbox complete with gear is in bronze with the worm screw hardened and ground. The flywheels are suitably sized and the belt guides are sturdy and made with watertight invitation bearings and adjustable widia plates. The electromechanical microswitch control can be used to tension the belt with the rotation of the blade. Equipped with an accident prevention safety device on the flywheel cover and on the blade, the machine is completed by a swivel table to support the material and the vice with the rapid approach device. Functioning. Lhjdpfjfh R Tyjx Ahzob Start the cutting cycle using the start button, the machine: 1. closes the vice and drives the belt motor 2. make the arch descend for the cut 3. the bow returns to the starting position 4. stop the belt motor 5. open the vice Possibility of manual cutting Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range From 45 sx 60° dx Stop for cuts of the same size Adjustable Electropump for belt cooling 0.06 kW

Condition: new, Used MACC 320 MS Semi-automatic sawing machine Good New " CE " Data sheet attached. Ready for delivery unless sold The basic characteristics of the machine (stiffness of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied to avoid the belt yielding, increase the duration, improve the linearity and the cutting time. Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Accident prevention safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size 0.06 kW electric pump for belt cooling Operation: start of the cutting cycle by start button, the machine: 1. closes the vice and drives the band motor 2. lowers the arc for cutting 3. the bow returns to the starting position 4. stops the band motor 5. opens the vice Possibility of manual cutting ACCESSORIES ON REQUEST : SINGLE-PHASE motor 69 m/1′ Speed variator from Ledpfofibfaex Ahzohb

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium size with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt drive with two-speed motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control Accident prevention safety device on the flywheel cover cover and on the blade Lodpfx Ahsfibd Tezjhb Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Adjustable stop for cuts of the same size Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Jaw height 200 mm Clamp jaw length 185 mm Worktop height 760 mm Machine weight 820 kg

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium and large dimensions with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt control with inverter driven motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control. Lhsdpfxefh R Tus Ahzob Accident prevention safety device on the fly cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Clamp jaw height 250 mm Jaw length 200 mm Worktop height 760 mm Machine weight 1250 kg 12260 N

Year of construction: 2025, operating hours: 12 h, condition: new, Front drilling machine – automatic for drilling legs at various angles, with a pendulum table. Triple drilling with chip extraction. The machine can operate in different settings and configurations. Designed for through-hole drilling. Lsdpjxb Elxjfx Ahzjhb

Condition: used, Auxiemba SERVOTECH ROB 20-II-DR Rotary Automatic Labelling Machine – Serial No. 306 Lhjdpfxox N Ur Tj Ahzeb Manufacturer Talleres Pupar, S.A. (brand: Auxiemba) San Sebastián, 169 – 08203 Sabadell, Barcelona, Spain Type Rotary automatic cold-glue labeller Industrial Applications Specifically designed for labelling cylindrical or conical containers in the beverage, food, cosmetics, or chemical sectors. Compatible with glass or plastic bottles, it provides high-precision labelling at high speeds on continuous production lines. Main Technical Specifications: - Model: SERVOTECH ROB 20-II-DR - Serial number: 306 - Year of manufacture: 2010 - Weight: 7430 kg - Technology: Rotary labelling using cold glue application - Drive system: Servo-motorized - Labelling stations: Multi-heads for wraparound or front label application - Structure: Stainless steel frame for wet/washdown environments 🧩 Machine Usage The SERVOTECH ROB 20-II-DR is a high-performance automatic labelling machine, designed to meet the speed and precision demands of modern industrial production lines. Thanks to its servo-driven rotary system, it guarantees consistent and accurate label positioning at high throughput rates. Suitable for both paper and synthetic labels applied with cold glue. ⚙️ Features / Differentiators This model stands out for its structural robustness, versatility in handling multiple container formats without slowing production, and servo technology that ensures label placement accuracy. The cold-glue system provides a clean finish with lower operating costs compared to hot-melt systems.

Condition: used, ROBINO & GALANDRINO POKER 2Z 24/30 Rotary Automatic Capsuling Machine Manufacturer Robino & Galandrino S.p.A. – Viale Italia, 142 – Canelli (AT), Italy Type Industrial rotary automatic capsuling machine Industrial Applications Automatic bottle capsuling on bottling and packaging lines, for continuous capsule application and finishing (wine, spirits, beverages). Main Technical Specifications - Model: POKER 2Z 24/30 - Serial/ID: OP008094674 - Year: 2009 - Compliance: CE Machine Usage Lhedpfex N Uryjx Ahzeb The POKER 2Z 24/30 automates capsuling in continuous flow on a rotary platform, delivering consistent capsule application and stable finishing quality suitable for industrial throughput and repeatability requirements. Features / Differentiators - Rotary design engineered for stable high-throughput operation - Integrated capsule feeding and distribution for continuous production - Full traceability through ID OP008094674 and model POKER 2Z 24/30

Condition: excellent (used), Year of construction: 2015, Robopac Athena Combi 5545 automatic shrink film wrapping machine The Athena Combi automatic shrink wrapping machine is based on technologies of high-end industrial machines. Due to continuous product development and research, Athena Combi provides great performance, versatility, and user-friendly interface. Because of the outstanding adaptability and accuracy of the machine, makes it possible to use high range of materials for shrink filming. Lhjdpfx Ajv D Eziohzjb The equipment meets the most stringent safety standards as well. Manufacturer: Robopac Model: Athena Combi 5545 Year: 2015 Sealing bar dimensions LxW: 550x450 mm Max. product height: 120 mm Min. Product dimensions LxWxH: 50x20x20 mm Capacity: 30-35 packages/minute Max. product weight: 120 kg. Power: 400V / 12kW / 50-60Hz Machine Dimensions LxWxH: 2.700x1.200x1.500 mm Machine Weight: 600 kg.

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch Lhedpfx Aeupbf Dohzob - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition

Condition: used, Internal threading machine Hagen & Goebel type HG 124 Machine no. No. 4112 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M15 Cutting capacity in brass M3 to M17.5 throat depth 250 mm Pinol stroke 80 mm Table size 345 x 245 mm Spindle speed 200 - 1000 rpm Motor power 0.55 / 1.0 kW Mains connection 380 Volt, 50 Hz - 6 speed levels via belt change (3 levels via belt + 2 motor speeds) - Thread pitch via guide cartridge - 2 guide cartridges with 0.8 mm and 28 G per inch thread pitch - Table height adjustment with toothed rack via hand crank on the round column - Spindle holder with cone Ø 14.8 to 16 mm - Gear rim drill chuck Ø 1 to 13 mm Ljdpohgnd Ajfx Ahzohb Space requirement L x W x H 900 x 500 x 1800 mm Weight 260 kg Good condition

Condition: good (used), FOR SALE BRUDERER BSTA 50 PRESS Automatic precision press by Bruderer Model: BSTA 50. Lhedpfx Ahoxvri Tezob Max. press force: 500 kN (50 t). Speed range: 100 – 1,200 spm. Adjustable stroke: 16; 19; 25; 32; 38; 44; 51 mm. Equipped with Bruderer BBV 202/120 feed unit. Max. strip width: 203 mm. Max. strip thickness: 6 mm. Max. feed length: 120 mm.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 022822, Automatic shrink wrapping machine Manufacturer: Italdibipack S.p.A. Model: MECPACK STX Serial No.: 022822 Year of construction: 2021 Condition: used Weight: 420 kg Required power: 1.5 kW Color: blue Internal item number: 2025120104 Pickup address: Industriestraße 5 (47918 Tönisvorst) The machine was in continuous operation until it was dismantled. Tailor-made solutions for your intralogistics Whether you need roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for the loading and unloading of your goods—or packaging machines—we are your competent partner! We are happy to provide you with a custom quotation or advise you on system planning and installation. Simply let us know your requirements and your on-site conditions. Lhodpsx Ak Rcjfx Ahzsb Benefit from our many years of experience and our excellent network of specialists. We have already successfully implemented projects for companies from a wide range of industries, such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together, we will develop solutions to optimize your workflow and material flow cost-effectively and sustainably. Even fully automated sorting technology or additional components such as order picking racks or containers can be provided upon request.

Condition: good (used), Year of construction: 2009, 11 spindle motors. Lhsdpfx Aevk Ed Rshzob Glass thickness: 3 to 30 mm. Minimum glass size: 85 x 150 mm. Speed: 0.5 to 5 min. With water basin and pump. Working direction: from right to left. Working height: 780 mm. Total length: 8520 mm. Depth: 1130 mm. Total height: 4850 mm.

Condition: excellent (used), Year of construction: 2007, Ref: 10815 . 2007 Muller Martini 3215 Ventura High speed, fully automatic sewing machine Features: High range of product sizes Papers from 22 gsm Feeder and/or knife opening Innovative sewing system Patented loop formation with compressed air Quick change between different type of stitches Equipped with: Suction opening 4 + 4 for products with or without over fold Optical scanning system Additional parts for processing of thin printing Stacker delivery Max signature length: 510mm Max. speed: 12,000/hour Lodot Sybcepfx Ahzshb

Condition: good (used), Year of construction: 1996, REF: MM5685 1 x Sorma Group automatic punnet netting machine. Model - PK8. Lhedst Evzrspfx Ahzjb Serial number - 1095. Date of manufacture - 1996. Speed - 35 packs/minute. Adjustable width of infeed conveyor by removing guides - 120mm to 140mm. Overall dimensions - 3.4m L x 1.1m W x 1.8m H.

Condition: good (used), Year of construction: 2010, machine/vehicle number: 792-128, Offer 25368 Technical data: - Pressing force at 10 bar 70 kN - Ram stroke 20 mm - Air consumption per stroke 10 l - Air supply 6 - 10 bar - Barcode scanner - Drive 220 V / 1 kW - Space requirement approx. W 1000 x H 2100 x D 1200 mm Lsdox E S Eiopfx Ahzehb - Weight approx. 450 kg - Feed station with decoiler 4000 mm - Discharge conveyor 1900 mm - Software manual PRS - AWS

Condition: used, Automatic Tube Bending Machine Brand: B.L.M. Model: B/90/M Description: Ledsx Swbijpfx Ahzohb Automatic tube bending machine designed for industrial applications, equipped with automatic programming for producing multiple bends in sequence. The machine allows adjustment of the reference distance, ensuring high precision and repeatability in the bending process. For all technical details, please refer to the technical data sheets available in the photos.

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is in production and ready to go. Lhedex N Dymjpfx Ahzjb Format: 540x720mm The machine is ready for die-cutting. Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: good (used), Horizon PF-40L Automatic Folding Machine Machine in perfect condition, current production model. Compact external dimensions, mounted on wheels for easy movement. Automatic machine setup from the control panel, high-stack feeding, extended feeding. Technical specifications: Maximum format: 320x630mm Lsdsx N Dxiopfx Ahzjhb Min. format: 125x128mm Basic weight: 40-160gsm Speed: 23,000 pcs/h 2 parallel cassettes 230V power supply Electrically controlled delivery Counter with batching function Smooth speed and feed adjustment High-stack feeding Sound-insulating panels on all units and cassettes Documentation

Condition: new, Year of construction: 2021, New 4 Head Automatic Capper Never Used / New Model RCP-141 To include Capper Feeder, automatic capper Lhsdpfov R I D Hjx Ahzsb

Condition: used, Coating machine SL-940 Used tools: SC350 + SC400, BlueWave200 20 machines available. Year of manufacture: 2022 and 2023 Lhjdpfxsx Tgywo Ahzob Price from €37,000 Configuration on request.

Condition: repair required (used), Year of construction: 2005, functionality: not functional, Automatic stretch wrap machine for loads placed on pallets. Machine requires repair! Missing one stretch film carriage, ASI communication not functioning, and control cabinet incomplete. Original machine documentation and electrical schematics included. Manufacturer: M.J. MAILLIS GROUP (SIAT) Lhjdpfjxfbfvex Ahzjb Model: MANCON 1710 Year of manufacture: 2005

Condition: refurbished (used), Numerical Control Type Power Control Professional Software woodWOP / TopDrill BST Lhjdpfx Ahodz Uk Tezjb No. 2 Through-feed motorized conveyoring belts (4 x Kw ?) No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) Miscellanous Spindles for each drilling head of the bottom vertical supports No. 2 Top vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each top vertical unit (2 x Kw 1,5) Miscellanous Spindles for each drilling head of the top vertical supports No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 36

Condition: excellent (used), Horizontal units/supports (No.) 1 (adjustable 0° - 180°) Drilling heads/Blocks for each horizontal unit (No.) 1 Spindles for each horizontal drilling head (No.) 29 Max. working width (mm) 1000 (ca.) Vertical top pressure clamps (No.) 3 Lhedpjhgbhcefx Ahzjb Total installed power (Kw) 3 (ca.)

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Lsdpfx Aegwbbqohzshb Numerical Control Power Control, Software WoodWOP Safety cabin (enclosure) of the working head and integral safety cabin (enclosure) of the machine In-feeding working table (panel support). Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized belts - Feeding speed (m/min) max 130 ca. Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 15 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Motorized carpet to evacuate chips and wastes. Separate electric and command cabinet Total installed power: Kw 99 N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR X-Y-Z ): N° 4 Drilling heads (4 x Kw 2.3) with No. 10 vertical spindles each (total top spindles No. 40) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR X-Y-Z ) : N° 6 Drilling heads (6 x Kw 2.3) with No. 40 vertical spindles each (total bottom spindles No 240) N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side) N° 8 Dowel Inserting nozzle & glue injectors(Right side) + N° 8 Dowel Inserting nozzle (Left Side) N° 2 Storage tanks for automatic feeding of the dowels OPTIONAL: WIRELESS BAR CODE SCANNER