Used Automatic Lathe for sale (24,831)

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Equipment: bar feeder, chip conveyor, A rebuild was carried out by Index for €380,000! EQUIPMENT Prepared as a double 3-spindle machine Part pick-off device Thread cutting gearbox Cucci Giovanni integral loader Dujdpoyx Tzrofx Ag Rjr Brankamp tool breakage monitoring and tool monitoring Cucci Giovanni bar feeder (2015) Knoll chip conveyor (2015)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, bar passage: 32 mm, The following works have been carried out on the machine in recent years: February 2022 – X2 axis ball screw replaced and bearings renewed August 2022 – X2 axis controller replaced September 2023 – Measuring system / controller for Ti axis replaced March 2025 – Measuring system for Ti axis replaced TECHNICAL DETAILS Bar capacity: 32mm EQUIPMENT 10 tool stations on turret with Y-axis for front and rear machining 5 gang tool positions 3 tool positions on drilling block for rear machining Dsdoyux N Eepfx Ag Rour 4 driven tools for cross operations C-axis main spindle Milling interpolation Cutting radius compensation Synchronous tapping ER16 holders

Condition: good (used), Year of construction: 2011, Control Fanuc OI-TD, Duedpfx Agsyw R Ere Rjr bar capacity 20mm, maximum cutting diameter 20mm, maximum cutting length 183mm, maximum drilling diameter 10mm, maximum tapping capacity M8, milling speed 6,000rpm, spindle speed 10,000rpm, C axis 0.001 degree, FMB barfeed, number of controlled axis X Y Z XB ZB.

Condition: excellent (used), Year of construction: 2021, Control Fanuc 32I-B, bar capacity 32mm, maximum cutting diameter 32mm, maximum cutting length 310mm, maximum drilling diameter 13mm, Dusdpfew Rct Hjx Ag Ror maximum tapping capacity M12, milling speed 5,000rpm, spindle speed 7,000rpm, Sub spindle C axis 0.001 degree, FMB Turbo 3-36/3200 barfeed, number of controlled axis Z, ZB, X, XB, C1, C2, Y. swarf conveyor,

Condition: used, Year of construction: 2021, number of spindles 8 bar capacity 36 mm control FANUC 30i-B Subspindle speed 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 6.944h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. The machine video from the production plant will be shared on request. Dodpfxewf D Szj Ag Rjur - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36

Condition: used, Year of construction: 2019, number of spindles 8 bar capacity 36 mm control FANUC 30i-B Subspindle speed 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 15.666h spindle hours. Dusdpswgi D Esfx Ag Ror The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36

Condition: used, Year of construction: 2019, number of spindles 8 bar capacity 36 mm control FANUC 30i-B Subspindle speed 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 15.650h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. Dujdpfjwf D S Ijx Ag Ror - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36

Condition: used, Year of construction: 2006, turning length: 205 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 500 rpm, turning diameter: 20 mm, overall weight: 3,500 kg, total width: 1,150 mm, total length: 6,850 mm, total height: 1,765 mm, Equipment: documentation/manual, CNC Swiss Type Automatic Lathe CNC Control Star NICS (Yaskawa-Siemens 840DI) Turning diameter 20 mm Turning length 205 mm Spindle bore diameter 20 mm Spindle speed 500-10.000 R/min Spindle motor 3,7/2,2 kW Min indexing C-axis main spindle 0,001 ° Min indexing C-axis sub spindle 0,001 ° Dedjywur Njpfx Ag Rour Number of tools on turret 16x Spindle speed driven tools 8.000 R/min Bar feeder FMB Turbo 3-26 (3200) LxWxH 6850x1150x1765 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 1984, Thomann EED 20 Automatic Bar Lathe For square and flat bars Capacity range: 6-20 mm Flat steel: 10/3-30/10 mm Turning length: 25-900 mm Technical specifications Length: 1200 mm Duedpfxswbglij Ag Rer Width: 660 mm Height (without base): 350 mm Height (with base): 1150 mm Weight (without base): 120 kg Voltage: 380 V Motor power: 0.75 kW Rotation speed: 7 rpm

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Technical Key Data Machine: TRAUB TNL 18 Year of manufacture: 2015 Dodpfxeyz Dyws Ag Reur Condition: Premium grade / Excellent Previous owner: Smith & Nephew; manufacturer of orthopedic implants Machine type: TNL 18, version TNL18-9 Acquisition price (2015): 206,800 EUR Application: Long and short turning operations Manufacturer: TRAUB Drehmaschinen GmbH & Co. KG Control / CNC Control system: TX8i-s with 64-bit RISC CNC/PLC processor USB interface PC connection via fiber-optic cable Color TFT flat-screen Electronic handwheel Software package: Helical / Polyform Thread cutting without compensation chuck Parting-off tool break monitoring Axis / GSP block position shutdown Spindles / Axes / Clamping technology Main spindle with belt drive Hollow clamping cylinder C-axis Change parts for collet F25 Mount for driven and programmable guide bushing Change parts for short turning mode Counter spindle with belt drive Hollow clamping cylinder X-Z-C axis Part ejector unit for flushing workpieces from the counter spindle Tool system Lower turret with X-Y-Z-H axis, main drive, 8 tool stations Upper turret with X-Y-Z-H axis, main drive, 8 tool stations Measuring systems / Additional axes Glass scale X-axis top and bottom Glass scale X4-axis Activation for driven and programmable guide bushing Workpiece handling / Peripheral equipment Workpiece discharge unit through the counter spindle Workpiece discharge unit at the front onto parts conveyor belt Hinged belt chip conveyor Manual rinsing unit for working area Connection for central extraction D 150 mm Coolant / Filtration / High pressure Operation with cutting oil Coolant supply 3 / 8 bar Tank: 500 l Compact belt filter on 500-l coolant tank Flow rate: approx. 100 l/min with emulsion or approx. 70 l/min with cutting oil Filtration fineness: approx. 30–40 micron Internal coolant supply up to 30 bar High-pressure coolant pump 120 bar incl. fine filter Immersion cooler for coolant cooling Coolant pump 20 bar Safety / Fire Protection Automatic CO2 fire extinguishing system Operational note: cutting oil EU conformity / CE present Electrics / Documentation Electrical system: 400 V / 50 Hz User documentation available Additional German documents available Magazine / Attachments Attachments for bar feeder magazine Suitable for LNS, FMB, IEMCA Magazine must be equipped for interchangeable operation with shift unit

Condition: used, Year of construction: 1999, functionality: fully functional, Equipment: documentation/manual, CNC Swiss-type automatic lathe Make: STAR Model: SR-32 Djdpfx Agjyzyr Ne Rjur Year of manufacture: 1999 with: FANUC 16-T control Backworking capability Synchronous spindle Driven tools C-axis Bar loader magazine FMB TURBO 5-42

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, spindle speed (max.): 8,000 rpm, bar passage: 32 mm, controller model: Traub TX8i-S, number of slots in tool magazine: 12, Equipment: chip conveyor, TECHNICAL DETAILS Dujdpfeyzxp Tjx Ag Rsr Bar capacity: 26 / 32 mm Max. main spindle speed: 8,000 rpm Axes: X1 / Y1 / Z1, C-axis integrated in the main spindle Turret: 1 Tool stations: 12 Drive power: 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) MACHINE DETAILS Power-on time: 116,721 h Operating hours: approx. 48,000 h Control: Traub TX8i-S DIMENSIONS & WEIGHT Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Machine weight: approx. 4,000 – 4,200 kg EQUIPMENT Chip conveyor: hinged belt, discharge height approx. 950 mm

Condition: good (used), Year of construction: 2002, Control: FANUC 18i-T Turning diameter: 32 mm Turning length: 120 mm Max. main spindle speed: 8,000 rpm Max. sub spindle speed: 8,000 rpm SLIDE 1 X-axis travel 1: 65 mm Y-axis travel 1: 350 mm Tool stations: 6 / 4 positions Fixed stations: 6 Dujdpfeyxpqvjx Ag Rer Driven stations: 4 SLIDE 2 X-axis travel 2: 265 mm Z-axis travel 2: 320 mm Tool stations: 2 / 3 positions Fixed stations: 2 Driven stations: 3 Y2 SLIDE Tool stations: 3 / 2 / 2 positions External machining: 3 Internal machining: 2 Driven stations: 2 Weight: 4,500 kg Bar feeder: IEMCA BOSS

Condition: used, Year of construction: 1987, Technical details: number of spindles: 8 spindle passage: 51 mm Article: multi spindle automatic lathe Manufacturer: Schütte Type: AF51 Yob: 1987 eight main spindles max. bar diameter D=51mm control SIEMENS SIMATIC S5 pick up in pos. 7, for rear machining thread cutting drive independent feed in positions 2/3 electronical trip dog control “Balluff” clear text display Wöhrle Dsdpeiay Sfsfx Ag Rsur coolant pump magnetic cartridge filter oil running incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type) Painting in light blue and light grey The configuration of tooling will be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1991, Technical details: number of spindles: 6 spindle passage: 51 mm Schutte SF51 DNT, yob. 1987, our ID #61868 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SF51 DNT Yob: 1987 Six-spindle automatic lathe with 6 main spindles max. nominal diameter D=51mm electronic cam control Balluff gripper in position 6 for backworking, sorting chute Dedpfxsl Rmqps Ag Reur independent longitudinal feed layer 5 screw chip conveyor Tapping couplings Interface for: Bar feeder IEMCA PRA Bar feeder IEMCA PRA40/33/F Scope of delivery without the blue chip conveyor The tooling will differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1994, Technical details: number of spindles: 8 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Dusdpfx Agsl Su Rxj Rer Type: AF32 S DNT Yob: 1994 Eight-spindle automatic lathe with 8 main spindles max. nominal diameter D=32mm control: Siemens SIMATIC S7 electronic cam control Balluff gripper in position 8 for backworking CNC cross slide position 6 CNC cross slide position 7 Workpiece belt Coolant cooling Schimpke Chip conveyor with magnetic separator Tapping couplings The tooling shown may differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1993, Technical details: number of spindles: 8 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 Dnt Yob: 1993 eight-spindle automatic lathe eight main spindles for bars up to D=32mm Modernized control: Siemens Sinumerik Motors: renewed modern motors suitable for modernized control system Electronic trip dog control: Balluff CNC cross slide position 5 cross CNC cross slide position 6 cross Preparation for gripper in position 8 (gripper optional) Independent feeds Thread cutting couplings integrated bar loader: Pietro CUCCHI; type: rack type magazine The scope of delivery regarding the tooling equipment could be different like pictures. Duodpfx Agergt E Rj Ror *

Condition: used, Year of construction: 2002, Technical details: number of spindles: 8 spindle passage: 20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AG20 Yob: 2002 eight-spindle automatic lathe 8 main spindles for bars up to D=20mm control: Siemens 840D 1x polygonal turning/thread milling device (new 2011) 1x polygonal turning/thread milling device for long turning (new 2011) 1x thread cutting/quick drilling spindle (new 2011) 1x pick-up device incl. various pick-up collets 4 cnc-cross slides Double cross slide in position 7 Dujdpfx Agswutgas Rsr Loading magazine PRA 52/P type 33 (bar length 3m), year 2004 High-pressure system Knoll SF 2000/Turbo-3 up to 100 bar, year 2004 Tool monitoring Brankamp Air conditioning unit Rittal in the front switch cabinet incl. spare parts package with various collets, cams and various tool holders for longitudinal and cross slides The machine has been run with oil and has processed brass Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 4SSY0144, CNC turning machine with main/sub spindle, bar feeder, and two 12-station turrets Make: Miyano, Model ABX-64SY Year of manufacture: 2011, Serial No. 4SSY0144 Control: Fanuc 31i-Model A Bar capacity: max. 64 mm Bar feeder make: FMB Turbo 5-55, chip conveyor make: Yoshida ----- Attractive offer – flexible & hassle-free We offer you not only a high-quality product but also tailored financing options to suit your needs. Whether down payment, installment payment, or customized financing models – together we will find the right solution. Upon request, we will also handle the entire transport logistics. From planning to reliable delivery, we ensure a smooth and on-time process, so you won’t have to worry about a thing. Dujdpsyzpb Tjfx Ag Rer 📞 Please feel free to contact us for further information or a non-binding offer. We offer you professional and personal advice.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: CJ5Y0190, CNC lathe with main and sub spindle, bar feeder, and both 12-station & 6-station turret Make: Miyano, Model BNJ-51Y3 Year of manufacture: 2011, Serial no. CJ5Y0190 Control: Fanuc Bar capacity: max. 51mm Bar loader: FMB Turbo 5-55, Chip conveyor: LNS Turbo MH500 ----- Attractive offer – flexible & worry-free Djdpfsyzpa Ajx Ag Rsur We offer you not only a high-quality product, but also tailored financing options to suit your requirements. Whether down payment, installment plan, or customized financing models – together we will find the right solution. On request, we also take care of the entire transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process so you have nothing to worry about. 📞 Please feel free to contact us for further information or a non-binding quote. We provide you with expert and personal advice.

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: R2EU2002, CNC lathe with main spindle and 12-station turret Duedpfx Agoyzn N Ns Rjr Manufacturer: EMCO TURN E45 Year of manufacture: 2002, Serial number R2EU2002 Control: Siemens, Sinumerik type Bar feeder: EMCO Compact Load E45 Turning diameter: 220 mm Chip conveyor: Knoll Attractive offer – flexible & hassle-free We offer not only a high-quality product, but also tailor-made financing options to suit your needs. Whether down payment, installment payments, or individual financing models – together we will find the right solution for you. Upon request, we can also take care of the entire transportation process. From planning to reliable delivery, we ensure a smooth and on-schedule operation so you don’t have to worry about a thing. 📞 Feel free to contact us for more information or a non-binding quote. We offer personal and competent advice.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1323, CNC Swiss-Type Automatic Lathe Star SR-32J Year of manufacture: 2011, Serial number: 1323 Control: Fanuc type 18i-TB Bar feeder: FMB Turbo 3-36 Chip conveyor: Mayfran CO2 extinguishing system: Kraft & Bauer ----- Attractive offer – flexible & worry-free Dodpfsyznvpsx Ag Rour We offer you not only a high-quality product, but also tailored financing options suited to your needs. Whether down payment, installment plans, or customized financing models – together we will find the right solution. Upon request, we can also take care of the entire transport logistics. From planning to reliable delivery, we ensure smooth and timely execution so you don’t have to worry about a thing. 📞 Feel free to contact us for further information or a non-binding offer. We are happy to advise you personally and professionally.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1324, CNC Swiss-Type Automatic Lathe Star SR-32J Year of manufacture: 2011, Serial number 1324 Control: Fanuc, Type 18i-TB Bar feeder: FMB Turbo 3-36 Chip conveyor: Mayfran CO2 fire suppression system: Kraft & Bauer ----- Attractive offer – flexible & hassle-free We not only offer you a high-quality product, but also tailored financing options to suit your needs. Whether down payment, installment payment, or customized financing models – together we will find the right solution. Dedpfx Agoyznuro Rsur On request, we can also take care of the entire transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process so you have nothing to worry about. 📞 Please feel free to contact us for further information or a non-binding offer. We provide you with personal and professional advice.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 0177, CNC Swiss Type Automatic Lathe Star SB-20 Type G Dodoyznt Ijpfx Ag Reur Year of manufacture: 2014, Serial number 0177 Control: Fanuc, Oi-TB Bar feeder: FMB Turbo 2-20 Chip conveyor: Mayfran CO2 fire suppression system: Kraft & Bauer ----- Attractive offer – flexible & worry-free We not only offer you a high-quality machine, but also tailored financing options to suit your needs. Whether it's a down payment, installment plan, or customized financing models – together we’ll find the right solution for you. Upon request, we can also handle complete transport logistics. From planning through to reliable delivery, we ensure a smooth and on-schedule process so you don’t have to worry about a thing. 📞 Please contact us for more information or a non-binding offer. We offer personal and professional advice.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1251, CNC lathe with main and sub-spindle, and bar loader Make: Star, Model SR-32J Year of manufacture: 2011, Serial number 1251 Control: Fanuc, Model 18i-TB Bar magazine by FMB, Model Turbo 3-36, chip conveyor by Mayfran, CO2 extinguishing system by Kraft & Bauer ----- Dusdpfxoyzmxps Ag Rsr Attractive offer – flexible & worry-free We offer not only a high-quality product but also tailored financing options to suit your requirements. Whether you prefer a down payment, installment payments, or individual financing models – together we’ll find the right solution. On request, we can also handle complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process, so you don’t have to worry about anything. 📞 Please feel free to contact us for further information or a non-binding quote. We provide professional and personal advice.